Calculation of secondary cable losses and ampacity in the presenceof harmonics

A simplified procedure for computing ohmic losses in secondary distribution cable systems by extending the Neher-McGrath model for 60 Hz losses is presented. Specifically, simplified formulae for evaluating ohmic losses due to harmonics are given. These results are subsequently used to compute the cable ampacity or the derating factor due to harmonics. The overall method is simple to follow and can be performed with a calculator. A typical example is given     

Crystal structure of synthesized CuGaTe2 determined by X-ray powder diffraction using the Rietveld method

A full profile X-ray powder diffraction structure refinement has been carried out on a sample of synthesized CuGaTe₂ using graphite monocromatized CuK step-scan data and a profile shape of the Pearson VII type. The most satisfactory convergence was achieved at R _p = 0.0666, R _wp = 0.0884, R _B = 0.0106 and R _F = 0.0102. The derived structural parameters at 26.5°C are: a = 0.602348(7), c = 1.193979(2) nm and x(Te) = 0.256(6). The ratio between lattice parameters, = c/2a = 0.9911 (0), differs from 1.0, indicating a tetragonal distortion, and non-ideal anion displacements, x(Te)1/4, is manifested by the existence of bond alternation of Cu-Te and Ga-Te with interatomic distances of 0.262(5) and 0.2578(5) nm, respectively. These results show a light tetrahedral deformation produced by four-fold tetrahedra of the copper cation in the CuGaTe₂ chalcopyrite-type structure.     

Corrosion and wear properties of multipurpose coatings deposited by ion-beam-assisted deposition

Electrochemical measurements and wear tests were performed on aluminium and aluminium alloy coatings containing magnesium for uniform and local pitting corrosion protection of low carbon steel substrates. Final hard chromium nitride and aluminium nitride layers were deposited at the surface of the protective films in order to lower friction and wear. The results show that wear and corrosion protection can be improved by use of bifunctional multilayers. The coatings for multipurpose application were generated by ion-beam-assisted deposition. The defined intrinsic film stress controlled by the ion-to-atom arrival ratio influences the corrosion properties. Increasing the ion-to-atom ratios usually improves the corrosion resistance.     

Effect of Inhomogeneities on the Apparent Location and Magnitude of a Cardiac Current Dipole Source

A mathematical model was used to investigate the effects of electrical inhomogeneities introduced by the intracavitary blood mass and the lungs on the apparent location and magnitude of a current dipole source representing local activity in the myocardium. Radial and tangential current source moments were considered, and lung conductivity was taken as a variable parameter. Both the blood mass and the lungs cause a current source to appear closer to the heart center than it actually is. The effect increases as the source moves away from the endocardial surface, and maximum displacement is estimated to be of the order of 1 cm. The net effect of the inhomogeneities is to increase the magnitude of the radial component of a source dipole while diminishing its tangential component. These effects depend on source location.     

Chemical modification of hemp,sisal, jute,and kapok fibers by alkalization

Plant fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of surface impurities and the large amount of hydroxyl groups make plant fibers less attractive for reinforcement of polymeric materials. Hemp, sisal, jute, and kapok fibers were subjected to alkalization by using sodium hydroxide. The thermal characteristics, crystallinity index, reactivity, and surface morphology of untreated and chemically modified fibers have been studied using differential scanning calorimetry (DSC), X‐ray diffraction (WAXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM), respectively. Following alkalization the DSC showed a rapid degradation of the cellulose between 0.8 and 8% NaOH, beyond which degradation was found to be marginal. There was a marginal drop in the crystallinity index of hemp fiber while sisal, jute, and kapok fibers showed a slight increase in crystallinity at caustic soda concentration of 0.8–30%. FTIR showed that kapok fiber was found to be the most reactive followed by jute, sisal, and then hemp fiber. SEM showed a relatively smooth surface for all the untreated fibers; however, after alkalization, all the fibers showed uneven surfaces. These results show that alkalization modifies plant fibers promoting the development of fiber–resin adhesion, which then will result in increased interfacial energy and, hence, improvement in the mechanical and thermal stability of the composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2222–2234, 2002