Chemical modification of hemp,sisal, jute,and kapok fibers by alkalization

Plant fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of surface impurities and the large amount of hydroxyl groups make plant fibers less attractive for reinforcement of polymeric materials. Hemp, sisal, jute, and kapok fibers were subjected to alkalization by using sodium hydroxide. The thermal characteristics, crystallinity index, reactivity, and surface morphology of untreated and chemically modified fibers have been studied using differential scanning calorimetry (DSC), X‐ray diffraction (WAXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM), respectively. Following alkalization the DSC showed a rapid degradation of the cellulose between 0.8 and 8% NaOH, beyond which degradation was found to be marginal. There was a marginal drop in the crystallinity index of hemp fiber while sisal, jute, and kapok fibers showed a slight increase in crystallinity at caustic soda concentration of 0.8–30%. FTIR showed that kapok fiber was found to be the most reactive followed by jute, sisal, and then hemp fiber. SEM showed a relatively smooth surface for all the untreated fibers; however, after alkalization, all the fibers showed uneven surfaces. These results show that alkalization modifies plant fibers promoting the development of fiber–resin adhesion, which then will result in increased interfacial energy and, hence, improvement in the mechanical and thermal stability of the composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2222–2234, 2002     

The nutritive value of refined rapeseed oils: A review

Recent findings on the nutritive value of rapeseed oil (RSO) with high erucic acid content have been compared to those of canbra oil (CO), an oil extracted from newly bred Canadian rapeseed with no erucic acid. Erucic acid in diets retards animal growth even if food consumption is not altered. Growth performances of CO are as good as olive or peanut oil. The unbalanced ratio of palmitic acid to monoethylenic acids of CO does not affect rat growth rate. Because of its glyceride structure and high content of erucic acid, RSO has a lower digestibility (81%) than CO (96%) in the rat. Unabsorbed erucic acid is not preferentially excreted as calcium soaps. Interesterification of RSO which converts 31.7% of the erucic chains to the 2 position improves digestibility of erucic acid. 2-Monoerucin is more efficiently absorbed than the free acid. In vivo metabolic conversion of erucic to oleic acid has been proved in the rat. β-oxidation of injected 14-¹⁴C labeled erucic acid proceeded at the same rate as oleic acid but the over-all yield of the reaction was lower. Fatty acid composition of tissues in animals fed RSO or CO is influenced on one hand by erucic and gadoleic (C_20∶1) acids of RSO, and on the other hand by the unbalanced ratio of palmitic-monoethylenic acids and the linolenic acid content of both oils. Nonnegligible amounts of erucic acid are deposited in the body fats of rats, chickens, turkeys, lambs and found in the milk of female rats fed RSO. Almost no erucic acid is incorporated in liver and testicles in the rat and it is not recovered in chicken egg yolk. The effect of RSO on rat reproduction has been re-examined. Dietary lipid and vitamin levels are of great importance in the results obtained. RSO induces myocarditis in several animal species. Similar lesions, although less frequent and severe, have been observed also with CO in the rat. Some authors have reported that erucic acid of RSO was responsible for the effect on heart muscle. Common fatty acid patterns to both RSO and CO have to be further investigated to explain the persisting effect of CO. One of 9 papers presented at the Symposium, “Cruciferous Oil-seeds,” ISF-AOCS World Congress, Chicago, September 1970.     

Flow distribution and pressure drop in plate heat exchangers—II Z-type arrangement

To investigate the flow distribution and the pressure drop in the Z-type arrangement plate heat exchangers, a theoretical analysis has been made including mass and momentum balances for a flow element in both the intake and exhaust conduits. Calculations based on one-dimensional flow equations have been carried out.It is found that the flow distribution and the pressure drop can be determined by a general characteristic parameter (m). Nearly uniform flow distribution may be obtained when m is equal to zero. In the case when m² is positive, the channel flow rates will increase in the direction of the intake stream. If m² is negative the channel flow rates will also increase in the intake stream direction. The analysis also shows that the total pressure drop in plate heat exchangers is practically the same for both U - and Z-type arrangements. The results are applicable to a wide variety of combinations of heat exchanger dimensions, channel goemetries and fluid velocity. They are summarized by charts that permit a designer quickly to estimate the flow patterns.     

Tensile strength of polyurethane exposed to nitrogen dioxide

Polyurethane prepared from tetramethylene glycol and diisocyanate was exposed in the form of films to small pressures of NO₂ and to NO₂ plus air. Tensile strength was measured as a function of exposure time and temperature with an apparatus especially constructed for the purpose of measuring mechanical properties in different environmental “atmospheres.”     

CO2 Retention in High-Alkali Borate Glasses

A study of the high-alkali region of glass formation in the system Na₂O +B₂O₃ reveals that retention of CO₂ from carbonate starting materials can become a serious preparative problem at the high-alkali extreme. Results presented for glasses prepared using both Na₂O and Na₂CO₃ show that residual CO₂ can lead to major differences in physical properties which in this work are represented by the viscosity-related glass transition temperature .     

Development of high-performance liquid chromatography criteria for determination of grades of commercial olive oils. Part I. The normal ranges for the triacylglycerols

Criteria for authentic olive oils were developed from isocratic high-performance liquid chromatography analyses of 99 olive oils from the major Mediterranean producers in the 1983–1986 crop years. Authentic olive oils include extra virgin, virgin and pure or refined oils, but exclude all reesterified and adulterated oils. The extra virgin through pure grades will have a combined area for the LOO (C_18:2C_18:1C_18:1), LOP (C_18:2C_18:1C_16:0), OOO (C_18:1C_18:1C_18:1), POO (C_16:0C_18:1C_18:1), POP (C_16:0C_18:1C_18:1), and SOO (C_18:0C_18:1C_18:1) peaks between 82.0 and 92.6% of the total area (L, linoleic; O, oleic; P, palmitic; S, stearic). Authentic oils will have ratios of LOO/LOP and OOO/POO that coincide with a line defined by OOO/POO=0.7844(LOO/LOP)+0.0968; correlation coefficient is 0.885. Authentic oils will not have a trilinolein (LLL) peak over 0.5% in area. Neither triolein (OOO) nor any other single peak suffices to characterize an olive oil sample as one of the authentic grades.     

Comparison of microwave and thermal cure of epoxy resins

Stoichiometric mixtures of DGEBA (diglycidyl ether of bisphenol A)/DDS (diaminodiphenyl sulfone) and DGEBA/mPDA (meta phenylene diamine) have been isothermally cured by electromagnetic radiation and conventional heating using thin film sample configurations. Fourier transform infrared spectroscopy (FTIR) was used to measure the extent of cure. Thermal mechanical analysis (TMA) was used to determine the glass transition temperatures directly from the cured thin film samples. Well-defined glass transitions were observed in the TMA thermograph for both thermal and microwave cured samples. Significant increases in the reaction rates have been observed in the microwave cured DGEBA/DDS samples. Only slight increases in the reaction rates have been observed in the microwave cured DGEBA/mPDA samples. Higher glass transition temperatures were obtained in microwave cured samples compared to those of thermally cured ones after gelation. The magnitude of increases of glass transition temperature is much larger for the DGEBA/DDS system than DGEBA/mPDA system. The microwave radiation effect was much more significant in DGEBA/DDS system than in DGEBA/mPDA system. DiBenedetto's model was used to fit the experimental T_g data of both thermal and microwave cured epoxy resins.     

The kinetics of the catalytic hydrogenolysis of ethane over Ni/SiO2

The rate of hydrogenolysis of ethane over a Ni/SiO₂ catalyst, studied over a large range of pressure and of temperature, is shown to be related to the degree of hydrogen coverage θ_H, by the equation: with K₀ nearly equal to the number of ethane molecules colliding with the Ni surface, E₀ = 14 ? 1 kcal/mole, Y = ?1 ? 2 and X = 15 ? 2. The rate-limiting step is believed to be the irreversible, dissociative adsorption of ethane on an ensemble of at least 12 adjacent Ni atoms, free from adsorbed hydrogen, resulting in the complete cracking of C₂H₆: C₂H₆ + 12Ni → 2

Irreversible adsorption of ethane is assumed to compete with the reversible adsorption of hydrogen. This mechanism, which is compared with those proposed earlier, is in good agreement with data on ethane adsorption studied by magnetic methods, and with a study of ethane hydrogenolysis over NiCu/SiO₂ catalysts.     

Characterisation of the neutral oil from a low-temperature coal tar

Tar resulting from fluidised-bed, low-temperature carbonisation of coal was treated to yield a neutral oil from which a series of six other samples was extracted. These were examined by proton magnetic resonance (p.m.r.) spectroscopy, low-ionising-voltage (11 eV) mass spectroscopy (m.s.), gel chromatography followed by fluorescent indicator analysis, and cryoscopy. Aliphatic fractions separated chromatographically were also examined by infra-red spectroscopy. Distributions of hydrogen between chemical types were found for the several fractions from 60 MHz p.m.r. spectra and presented in terms of average structural parameters. M.s. analysis indicated negligible cracking of paraffin components, and the average molecular weight of 197 agreed well with cryoscopic determinations. For the carbon ratio, f_a, between aromatic and total, agreement between m.s. and p.m.r. depends on the p.m.r. structural analysis scheme adopted. P.m.r. and m.s. structural analyses of the aromatics emphasise the predominance of di- and tri-nuclears, with about 40% of available sites substituted, and the importance of acenes in lowtemperature carbonisation material. Gas and gel chromatography showed urea-adductable paraffins to be largely straight-chain C₁₀-C₂₆, much as for tars from carbonisation at higher temperature.     

LIQUID PHASE TRANSPORT PROPERTIES IN A HIGH PRESSURE PACKED COLUMN

A mathematical model of fluid flow and mass transfer in a packed bed was derived and used to evaluate the liquid phase axial dispersion and mass transfer coefficients under high pressure conditions. The least-squares method was used to evaluate the rate parameters from experimental breakthrough curves, and the agreement between the concentration curves predicted from rate parameters and those measured experimentally was good. Experiments were performed at 20 and 200°C with water as a solvent and nonporous soda-lime glass beads as packing. Although the axial dispersion coefficient was independent of temperature and pressure, the mass transport parameters were found to be pressure dependent.