Degradation of Stiffness of Cemented Calcareous Soil in Cyclic Triaxial Tests

The deformation characteristics of artificially cemented calcareous soil subjected to undrained cyclic triaxial loading are investigated at different confining pressure and cyclic stress levels. The influence of cementation on the shear stiffness is investigated by comparing the behavior of cemented and uncemented soils with similar initial conditions. It is observed that the deviator stress and the deviatoric strain at yield reduced with increasing number of cycles for cemented sand due to progressive degradation of bond, which results in significant decrease in stiffness. On the other hand, a strain-hardening effect is observed in uncemented sand and this results in increasing yield stress and strain with progressive number of cycles. A linear relationship between degradation index and number of cycles is observed for cemented sand. This relationship has been synthesized in the form of an empirical equation by modifying a previously proposed equation for cohesive soils. This empirical equation was further used to evaluate the fatigue life of soils by adopting a failure criterion.     

Failure of a stationary pump engine piston

Piston failures are not a common occurrence, but they do occur, and failure is usually associated with fatigue crack growth. Most failures initiate at the gudgeon pin hole or in the skirt of the piston. Occasionally they fail elsewhere. In the example covered in this paper, failure initiated in the crown and progressed down to the gudgeon pin before final failure occurred. This paper outlines the cause and mode of failure and shows that small metallurgical discontinuities can contribute to these failures under the right circumstances.     

Schäden durch kerbinduzierte Schwingbrüche

Failures by notch induced fatigue fractures Notches produce local stress concentrations and promote the formation of fatigue cracks. Characteristic types of notches as a result of design, manufacturing and operation are presented and remedial measures are discussed. Examples demonstrate the effect of different kinds of notches on various components.     

Delamination Resistant Zinc Alloys: Simple Concept and Results on the System Zinc‐Magnesium

Alloying zinc coatings with elements such as magnesium and titanium increases the corrosion resistance in industrial tests. Based on the fundamental mechanism of cathodic delamination, a simple concept how alloying zinc with specific elements might improve its resistance to cathodic delamination is presented in this paper. As an example, results concerning the delamination of a simple polymer from the zinc‐magnesium intermetallic MgZn₂ are presented. From electrode potential measurements obtained with the Scanning Kelvin Probe it can be concluded that cathodic delamination from this alloy is completely inhibited. This behaviour is attributed to the electronic properties of the magnesium‐rich oxidic passive layer, that inhibits the oxygen reduction reaction at the metal oxide/polymer interface.     

Crystallization of Polymer-Derived Silicon Carbonitride at 1873 K under Nitrogen Overpressure

The chemical stability of an amorphous silicon carbonitride ceramic, having the composition 0.57SiC·0.43Si₃N₄·0.49C is studied as a function of nitrogen overpressure at 1873 K. The ceramic suffers a weight loss at p _N2 < 3.5 bar (1 bar = 100 kPa), does not show a weight change from 3.5 to 11 bar, and gains weight above 11 bar. The structure of the ceramic changes with pressure: it is crystalline from 1 to 6 bar, amorphous at ∼10 bar, and is crystalline above ∼10 bar. The weight-loss transition, at 3.5 bar, is in excellent agreement with the prediction from thermodynamic analysis when the activities of carbon, SiC, and Si₃N₄ are set equal to those of the crystalline forms; this implies that the material crystallizes before decomposition. The amorphous to crystalline transition that occurs at ∼10 bar, and which is accompanied by weight gain, is likely to have taken place by a different mechanism. A nucleation and growth reaction with the atmospheric nitrogen is proposed as the likely mechanism. The supersaturation required to nucleate α-Si₃N₄ crystals is calculated to be 30 kJ/mol.     

Endoscopic study of the small intestine with push enteroscopy. A prospective study

OBJECTIVE: To evaluate whether push enteroscopy of the small bowel (PES), undertaken after extensive previous investigations in suspected intestinal bleeding from an uncertain site, chronic diarrhoea or lymphoma of the small intestine, contributes to the diagnosis, and to ascertain the results of PES and its clinical significance. PATIENTS AND METHODS: 56 consecutive patients (29 men, 27 women; mean age 63 years) were investigated prospectively. The main indications for PES were the search for the source of intestinal bleeding in 79% of patients (group A), chronic diarrhoea or tropical sprue in 16% (group B) and search for tumour of lymphoma in 5% (group C). PES was always performed in fasting patients under sedation/analgesia using a video PES, which contrary to catheter enteroscopy provides a channel for intervention. RESULTS: In group A 27% of patients were found to have lesions, in particular angiodysplasias, or (in once case) leiomyoma. Half of these patients were successfully treated endoscopically without later surgical intervention being required (mean follow-up of six months). In the other half operation became necessary, either because the disease itself indicated it or the bleeding persisted, the source being in the more distant small intestine and thus not accessible to endoscopic intervention: only 50% of the length of the small intestine proved to be within reach of the instrument. No abnormalities were discovered in patients of groups B and C. CONCLUSION: In cases of gastrointestinal bleeding from an uncertain source PES should be performed first, because in many cases it may obviate surgical intervention. But PES seems to contribute little of diagnostic value in other indications.     

Radiale Wärmeleitung in durchströmten Schüttungsrohren

Heat Transport to the Wall of Packed Tubes. Radial conduction of heat in packed tubes has a crucial influence on yield and selectivity of many heterogeneously catalyzed reactions. In spite of many years of intensive research in the field, there are still tremendous discrepancies between correlations of different origin. Even the standard model using two constant heat transport parameters, which was introduced in the fifties and has since become most widely accepted, has been controversially discussed and called into question. The unsatisfactory state of the art has been an incentive for several groups of researchers to take up this old topic once again. Three parallel experimental investigations on heat transport with air flowing in packed tubes of similar dimensions, electrically heated, steam-heated, or water-cooled, were completed in 1991. Comparative evaluation of the results of these three investigations, together with other data from the relevant literature, now provides the first clear answers to some of the questions so controversially discussed in the past.