Relevance of the acid–base approach in prediction of adhesion properties in two‐component injection moulding

We demonstrate the use of innovative wetting method in prediction of the adhesion properties of biobased polymers for two‐component injection moulding, taking into account the acid–base surface properties of joined materials. The measurements were carried out in accordance with modified Berger method by calculation of the difference in shortened acidity parameter ΔD_short between hard and soft component. Correlation factors up to 0.99 were observed between ΔD_short and peel force. In comparison to results obtained by conventional wetting methods, high potential for the selection of components with high interface adhesion and for prediction of the functionality by the acid–base approach was demonstrated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43048.     

Influence of Microstructure and Surface Activation of Dual‐Phase Membrane Ce0.8Gd0.2O2−δ–FeCo2O4 on Oxygen Permeation

Dual‐phase oxygen transport membranes are fast‐growing research interest for application in oxyfuel combustion process. One such potential candidate is CGO‐FCO (60 wt% Ce_0.8Gd_0.2O_2?δ–40 wt% FeCo₂O₄) identified to provide good oxygen permeation flux with substantial stability in harsh atmosphere. Dense CGO‐FCO membranes of 1 mm thickness were fabricated by sintering dry pellets pressed from powders synthesized by one‐pot method (modified Pechini process) at 1200°C for 10 h. Microstructure analysis indicates presence of a third orthorhombic perovskite phase in the sintered composite. It was also identified that the spinel phase tends to form an oxygen deficient phase at the grain boundary of spinel and CGO phases. Surface exchange limitation of the membranes was overcome by La_0.6Sr_0.4Co_0.2Fe_0.8O_3?δ (LSCF) porous layer coating over the composite. The oxygen permeation flux of the CGO‐FCO screen printed with a porous layer of 10 μm thick LSCF is 0.11 mL/cm² per minute at 850°C with argon as sweep and air as feed gas at the rates of 50 and 250 mL/min.     

Enhanced O2 Flux of CaTi0.85Fe0.15O3−δ Based Membranes by Mn Doping

Dense symmetric membranes of CaTi_0.85?xFe_0.15Mn_xO_3?δ (x = 0.1, 0.15, 0.25, 0.4) are investigated in order to determine the optimal Mn dopant content with respect to highest O₂ flux. O₂ permeation measurements are performed as function of temperature between 700°C–1000°C and as function of the feed side ranging between 0.01 and 1 bar. X‐ray photoelectron spectroscopy is utilized to elucidate the charge state of Mn, and synchrotron radiation X‐ray powder diffraction (SR‐XPD) is employed to investigate the structure symmetry and cell volume of the perovskite phase at temperatures up to 800°C. The highest O₂ permeability is found for x = 0.25 over the whole temperature and ranges, followed by x = 0.4 above 850°C. The O₂ permeability for x = 0.25 reaches 0.01 mL(STP) min^?1 cm^?1 at 925°C with 0.21 bar feed side and Ar sweep gas. X‐ray photoelectron spectroscopy indicates that the charge state of Mn changes from approx. +3 to +4 when x > 0.1, which implies that Mn mainly improves electronic conductivity for x > 0.1. The cell volume is found to decrease linearly with Mn content, which coincides with an increase in the activation energy of O₂ permeability. These results are consistent with the interpretation of the temperature and dependency of O₂ permeation. The sintering behavior and thermal expansion properties are investigated by dilatometry, which show improved sinterability with increasing Mn content and that the thermal expansion coefficient decreases from 12.4 to 11.9 × 10^?6 K^?1 for x = 0 and x = 0.25, respectively.     

Effect of CO2 Exposure on the Chemical Stability and Mechanical Properties of BaZrO3‐Ceramics

The reactivity of BaZrO₃ with CO₂ has been addressed as one of the major challenges with BaZrO₃‐based electrolytes in protonic ceramic fuel cells. Here, we present a study of the effect of CO₂ exposure on BaZrO₃‐materials at elevated temperatures. Dense BaZr_1?xY_xO_3?x/2 (x = 0, 0.05, 0.1, 0.2) and BaCe_0.2Zr_0.7Y_0.1O_2.95 ceramics were prepared by sintering of powder prepared by spray pyrolysis. The Vickers indentation method was used to determine the hardness and estimate the fracture toughness of pristine materials as well as the corresponding materials exposed to CO₂. Formation of BaCO₃ on the surface of exposed ceramics was confirmed by X‐ray diffraction and electron microcopy. The reaction resulted in formation of Ba‐deficient perovskite at the exposed surface. The reaction with CO₂ was most pronounced at 650°C compared to the other temperatures applied in the study. The reactivity was also shown to depend on the Y‐content and the grain size and was most pronounced for BaZr_0.9Y_0.1O_2.95. The reaction with CO₂ was observed to have a profound effect on the fracture toughness of the ceramics, demonstrating a depression of the mechanical stability of the materials. The results are discussed with respect to the chemical and mechanical stability of BaZrO₃ materials, with particular emphasis on the composition and grain size.     

Design and application of nanoparticle coating system with decoupled spray generation and deposition control

Coatings are widely used in various biomedical applications to change the interaction of the surfaces with bioactive materials. The key factors that determine the quality of a spray-coated layer are the size (order of a few microns in diameter) and dimensional uniformity of droplets in the spray and the droplet impact velocity. For many applications, coating quality is strongly dependent on the method and equipment used during the application process. This paper presents the development of a decoupled system for spray coating and micro-printing, which includes an ultrasonic spray generation device and a nozzle for the spray deposition independently operated. Design and development of the system as well as testing for different applications are presented in this paper. The system design can be potentially used for large area coating, such as windows and solar panels, as well as micro-printing of electronic circuits and numerous other applications.     

Bioavailability Studies and in vitro Profiling of the Selective Excitatory Amino Acid Transporter Subtype 1 (EAAT1) Inhibitor UCPH‐102

Although the selective excitatory amino acid transporter subtype 1 (EAAT1) inhibitor UCPH‐101 has become a standard pharmacological tool compound for in vitro and ex vivo studies in the EAAT research field, its inability to penetrate the blood–brain barrier makes it unsuitable for in vivo studies. In the present study, per os (p.o.) administration (40 mg kg^?1) of the closely related analogue UCPH‐102 in rats yielded respective plasma and brain concentrations of 10.5 and 6.67 μm after 1 h. Three analogue series were designed and synthesized to improve the bioavailability profile of UCPH‐102, but none displayed substantially improved properties in this respect. In vitro profiling of UCPH‐102 (10 μm ) at 51 central nervous system targets in radioligand binding assays strongly suggests that the compound is completely selective for EAAT1. Finally, in a rodent locomotor model, p.o. administration of UCPH‐102 (20 mg kg^?1) did not induce acute effects or any visible changes in behavior.     

Structure–Activity Relationships of JMV4463, a Vectorized Cathepsin D Inhibitor with Antiproliferative Properties: The Unique Role of the AMPA‐Based Vector

Cathepsin D (CathD) is overexpressed and secreted by several solid tumors and stimulates their growth, the mechanism of which is still not understood. In this context, the pepstatin bioconjugate JMV4463 [Ac‐arg‐O₂Oc‐(Val)₃‐Sta‐Ala‐Sta‐(AMPA)₄‐NH₂; O₂Oc=8‐amino‐3,6‐dioxaoctanoyl, Sta=statine, AMPA=ortho‐aminomethylphenylacetyl], containing a new kind of cell‐penetrating vector, was previously shown to exhibit potent antiproliferative effects in vitro and to delay the onset of tumors in vivo. In this study, we performed a structure–activity relationship analysis to evaluate the significance of the inhibitor and vector moieties of JMV4463. By modifying both statine residues of pepstatin we found that the antiproliferative activity is correlated with CathD inhibition, supporting a major role of the catalytic activity of intracellular CathD in cancer cell proliferation. Replacing the vector composed of four AMPA units with other vectors was found to abolish cytotoxicity, although all of the conjugates enabled pepstatin transport into cells. In addition, the AMPA₄ vector must be localized at the C terminus of the bioconjugate. The unexpected importance of the vector structure and position for cytotoxic action suggests that AMPA₄ enables pepstatin to inhibit the proteolysis of critical CathD substrates involved in cell proliferation via a unique mechanism of action.     

Discovery of Highly Potent Dual Orexin Receptor Antagonists via a Scaffold‐Hopping Approach

Starting from suvorexant (trade name Belsomra), we successfully identified interesting templates leading to potent dual orexin receptor antagonists (DORAs) via a scaffold‐hopping approach. Structure–activity relationship optimization allowed us not only to improve the antagonistic potency on both orexin 1 and orexin 2 receptors (Ox1 and Ox2, respectively), but also to increase metabolic stability in human liver microsomes (HLM), decrease time‐dependent inhibition of cytochrome P450 (CYP) 3A4, and decrease P‐glycoprotein (Pgp)‐mediated efflux. Compound 80 c [{(1S,6R)‐3‐(6,7‐difluoroquinoxalin‐2‐yl)‐3,8‐diazabicyclo[4.2.0]octan‐8‐yl}(4‐methyl‐[1,1′‐biphenyl]‐2‐yl)methanone] is a potent and selective DORA that inhibits the stimulating effects of orexin peptides OXA and OXB at both Ox1 and Ox2. In calcium‐release assays, 80 c was found to exhibit an insurmountable antagonistic profile at both Ox1 and Ox2, while displaying a sleep‐promoting effect in rat and dog models, similar to that of the benchmark compound suvorexant.     

4‐Biphenylalanine‐ and 3‐Phenyltyrosine‐Derived Hydroxamic Acids as Inhibitors of the JumonjiC‐Domain‐Containing Histone Demethylase KDM4A

Overexpression of the histone lysine demethylase KDM4A, which regulates H3K9 and H3K36 methylation states, has been related to the pathology of several human cancers. We found that a previously reported hydroxamate‐based histone deacetylase (HDAC) inhibitor (SW55) was also able to weakly inhibit this demethylase with an IC₅₀ value of 25.4 μm . Herein we report the synthesis and biochemical evaluations, with two orthogonal in vitro assays, of a series of derivatives of this lead structure. With extensive chemical modifications on the lead structure, also by exploiting the versatility of the radical arylation with aryldiazonium salts, we were able to increase the potency of the derivatives against KDM4A to the low‐micromolar range and, more importantly, to obtain demethylase selectivity with respect to HDACs. Cell‐permeable derivatives clearly showed a demethylase‐inhibition‐dependent antiproliferative effect against HL‐60 human promyelocytic leukemia cells.