Simplified 0.35-μm flash EEPROM process using high-temperatureoxide (HTO) deposited by LPCVD as interpoly dielectrics and peripheraltransistors gate oxide

A simplified flash EEPROM process was developed using high-temperature LPCVD oxide both as flash cells interpoly dielectrics and as peripheral transistors gate oxide (decoding logic). An O₂ anneal at 850°C lowers charge trapping and interface trap density induced by Fowler-Nordheim injection. However, electron trapping remains slightly higher than with dry thermal oxide. Similar memory charge loss and write-erase endurance are obtained as for ONO-insulated cells. HTO thus proves to have the required quality and reliability to be used in flash EEPROMs     

Potentiation of a three drug chemotherapy regimen by radiation

The combination of N-(phosphonacetyl)-L-aspartate, 6-methylmercaptopurine, and 6-aminonicotinamide has been shown to be an effective antineoplastic regimen and also to enhance the effects of other chemotherapeutic agents. The mechanism of action of this combination of drugs is not known definitively, but one possible mechanism is biochemical modulation of energy metabolism and inhibition of production of tumor ATP. Tumor-bearing mice were treated with N-(phosphonacetyl)-L-aspartate, followed 17 h later by 6-methylmercaptopurine and 6-aminonicotinamide. 31P nuclear magnetic resonance spectroscopic studies demonstrated a significant depletion of high energy phosphates at 10 h post-6-methylmercaptopurine and 6-aminonicotinamide. The addition of radiation at this time was shown to induce a significantly longer tumor growth delay and a greater number of regressions (including durable complete regressions) than either chemotherapy or radiation alone. The combination of chemotherapy and radiation was found to be supra-additive compared to the antineoplastic effects of either modality administered separately, without a measurable increase in host toxicity.     

Diffusion bonding of an aluminium-lithium alloy (AA8090) using aluminium-copper alloy interlayers

Diffusion bonds have been produced between sheets of an Al-Li-Cu-Mg-Zr alloy using aluminium-4% copper vapour deposited metallic interlayers. Microstructural changes occurred both in the parent alloy and in the bond interface after diffusion bonding cycles and post-bonding heat treatments were analysed. Different metallographic techniques (light microscopy, scanning and transmission electron microscopy) have been used. Diffusion bonding trials were carried out using the same alloy (AA8090), both in non-superplastic (T6) and superplastic conditions. Differences in their behaviours in relation to diffusion bonding were observed.     

利用FPGA快速开展新一轮设计

设计工程师面临的挑战 在今天的市场上，产品迅速上市的压力愈来愈大，但产品的使用寿命却不断缩短。产品设计稳定于12-18个月的周期不再存在，取而代之的是产品每6个月便会更新。缩短的使用寿命给OEM厂商带来更大的压力，需要更迅速及高效地把新设计推向市场。有研究指出，产品的推出若延迟4周，便会失去约14％的市场份额。     

Determination of site-specific carbon isotope ratios at natural abundance by carbon-13 nuclear magnetic resonance spectroscopy.

Site-specific natural isotope fractionation of hydrogen studied by deuterium NMR (SNIF-NMR) spectroscopy is a powerful source of information on hydrogen pathways occurring in biosyntheses in natural conditions. The potential of the carbon counterpart of this method has been investigated and compared. Three typical molecular species, ethanol, acetic acid, and vanillin, have been considered. Taking into account the requirements of quantitative 13C NMR, appropriate experimental procedures have been defined and the repeatability and reproducibility of the isotope ratio determinations have been checked in different conditions. It is shown that the carbon version of the SNIF-NMR method is capable of detecting small differences in the carbon-13 content of the ethyl fragment of ethanols from different botanical or synthetic origins. These results are in agreement with mass spectrometry determinations of the overall carbon isotope ratios. Deviations with respect to a statistical distribution of 13C have been detected in the case of acetic acid and vanillin. However, since the method is very sensitive to several kinds of systematic error, only a relative significance can be attached at present to the internal parameters directly accessible. Isotope dilution experiments have also been carried out in order to check the consistency of the results. In the present state of experimental accuracy, the 13C NMR method is of more limited potential than 2H SNIF-NMR spectroscopy. However it may provide complementary information. Moreover it is particularly efficient for detecting and quantifying adulterations that aim to mimic the overall carbon-13 content of a natural compound by adding a selectivity enriched species to a less expensive substrate from a different origin.     

Model Driven Architecture

Bei der Model Driven Architecture (MDA) bilden Modelle die zentralen Elemente des Softwareentwicklungsprozesses. Ziel ist es, plattformspezifische Modelle möglichst automatisiert aus plattformunabhängigen Modellen abzuleiten. Dadurch soll der Aufwand der Softwareentwicklung verringert und die Adaptierung an neue Technologien erleichtert werden.*Vorschläge an Prof. Dr. Frank Puppe oder Dieter Steinbauer Alle „Aktuellen Schlagwörter“ seit 1988 finden Sie unter: www.ai-wuerzburg.de/as     

Finite element hourglassing control

A new hourglassing control technique for quadrilateral and hexahedral elements used in dynamic finite element codes is presented. Based on expansion of the strees in a Taylor series and retention of additional terms beyond the usual constant stress term, this technique has the advantage that actual rather than artificial material properties are used. Simplifications that render this technique competitive with artificial viscosity and stiffness procedures in terms of additional storage and computation requirements are described.     

A survey of the training of computer users in Swedish companies

This study concerns how user training on newly introduced computer application programs is carried out. Questionnaire data from the computer managers of 265 Swedish companies were analysed. The results show that formal training, i.e., teacher-directed group instruction, and self-studies using instruction manuals represented nearly two-thirds of all reported training forms. For the most recently introduced program, classes (group instruction) with simultaneous computer exercises was the form of formal training that was nearly always used. When formal training was given it was compulsory in over half of the cases. However, substitutes for users attending a training course were only provided by the company in very few of these cases. The implications of these findings for effective user training are discussed.