Acoustic emissions simulation of tumbling mills using charge dynamics

Knowledge of the internal variables of a mill is of importance in design and performance optimization of the mill, notwithstanding the difficulty in measuring these variables within the harsh mill environment. To overcome this problem, the research has focused on measuring the internal parameters through non-invasive measurement methods such as the use of the vibration/acoustic signal obtained from the mill. Alternatively, virtual instruments, such as discrete element methods (DEM), are employed. Here, a methodology is developed to simulate on-the-shell acoustic signal emitted from tumbling mills using the information extracted from a DEM simulator. The transfer function which links the forces exerted on the internal surface of the mill and the acoustic signal measured on the outer surface is measured experimentally. Given this transfer function and the force distribution obtained from the DEM simulation, and assuming a linear time-invariant response, the on-the-shell acoustic of a laboratory scale ball mill has been simulated. Comparison of this simulated signal with the signal measured experimentally can be used as a criterion to judge the validity of the DEM simulations, and as a tool for enhancing our understanding of both DEM simulations and the use of acoustics within the context of mineral processing. The results derived from preliminary experiments on a laboratory scale mill shows satisfactory agreement between the actual measurement and the simulated acoustic signal.     

Development of colorimetric analytical methods to monitor quaternary amine grafted surfaces

Quick and simple colorimetric analytical techniques were developed to monitor functionalization of surfaces with quaternary amine bearing polymers as complementary qualitative tests to the traditionally used antimicrobial test protocols. First, an established antimicrobial quaternary ammonium salt (QAS) was chosen as a probe compound and an acrylol functional group was introduced (acrylol‐QAS) to facilitate its polymerization with acrylic monomers. Surface graft polymerization was carried out with methyl methacrylate (MMA) and acrylol‐QAS on cotton fabric surface. The success of graft polymerization, durability after repetitive aqueous extraction, and the effect of crosslinking agents on the durability and extent of polymerization were tested with a fluorescein spot and a bromophenol solution test. The results of these colorimetric analytical methods were in perfect agreement with those of antimicrobial tests, XPS, and SEM analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Reasoning about spreadsheets with labels and dimensions

Labels in spreadsheets can be exploited for finding formula errors in two principally different ways. First, the spatial relationships between labels and other cells express simple constraints on the cells usage in formulas. Second, labels can be interpreted as units of measurements to provide semantic information about the data being combined in formulas, which results in different kinds of constraints.In this paper we demonstrate how both approaches can be combined into an integrated analysis, which is able to find significantly more errors in spreadsheets than each of the individual approaches. In particular, the integrated system is able to detect errors that cannot be found by either of the individual approaches alone, which shows that the integrated system provides an added value beyond the mere combination of its parts. We also compare the effectiveness of this combined approach with several other conceivable combinations of the involved components and identify a system that seems most effective to find spreadsheet formula errors based on label and unit-of-measurement information.     

Temporal horizons in decision making.

The perception of duration is crucial when we make choices between immediate and delayed rewards. Immediate rewards are valued more than the same rewards if they are delayed. Preferences for earlier rewards become even stronger when the reward can be received within a subjectively proximate time frame. A “rational” decision to wait for a delayed reward may be overruled by an “impulsive” choice when the option for the closer reward falls within this proximate time range. Based on findings on circadian and circannual physiological rhythms, we suggest that there are 2 time units that are both biologically and culturally determined and have an impact on human experience and behavior: the day and the year. We highlight results of a neuroimaging study showing that rewards with delays up to 1 year are discounted differently than reward delays longer than 1 year. This duration-dependent discounting is associated with specific brain activation in the striatum. We present various conceptualizations of subjective time incorporated in parametric models of intertemporal decisions that may lead to a better understanding of human choice behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A reassessment of Asian pacific excellence programs in higher education: the Taiwan experience

With the growth of competition between nations in our knowledge-based world economy, excellence programs are becoming a national agenda item in developing as well as developed Asian countries. The main purpose of this paper is to compare the goals, funding policies and selection criteria of excellence programs in China, Japan, Korea and Taiwan and to analyze the academic achievement of their top ranked universities in three areas: research output, internationalization, and excellence, by using data from the Shanghai Jiao Tong, QS, and HEEACT rankings. The effectiveness of Taiwan??s ??Development Plan for World Class Universities and Research Centers of Excellence?? was assessed as a case study in the paper via a survey targeting on 138 top administrators from 11 Taiwan??s universities and 30 reviewers. The study found that more funding nations had, the more outputs and outcomes they would gain, for example China. The Taiwan case demonstrates that world-class universities and research centers are needed in Asian nations despite the concerns for inequality which they raise.     

At the edge: media constructions of a stigmatised Irish housing estate

By triangulating analyses of content and reception with a focus on production, this article attempts to understand the dynamics of and underlying reasons for the media stigmatisation of place. The research described contributes to a body of work examining how mass media and other social forces factor in the creation of negative stereotypes that damage the reputations of the places in which the poor reside. The overarching framework of understanding, provided by Goffman’s theory of stigma, is complemented by two further inter-related theoretical approaches, namely Social Exclusion and Political Economy. Combining analyses of media production (practices), media content (discourses) and audience reception (beliefs, attitudes), we analyse the representation of one of Ireland’s most deprived public housing estates in the print and broadcast media. Having established the stigmatising character and impact of national and local media content via this tripartite methodology, we focus on identifying and explaining the media practices that serve to (re)produce the estate’s ‘spoiled identity’. Our analysis of journalists’ explanations for these practices identifies the commercial realities, which progressively influence media production, as directly impacting media producers’ relationships with, and depictions of, poor places. We conclude by examining debates regarding the potential for rehabilitating a spoiled identity.     

Six-layer lamination of a new dry film negative-tone photoresist for fabricating complex 3D microfluidic devices

We present a new epoxy-based negative-tone dry film photoresist (DFR) for fabricating multilayer microfluidic devices using a lamination process combined with a standard photolithography technology. As proof-of-concept, a complex 3D-hydrodynamic focusing device was produced via a six-layer lamination process of 33 µm-thick DFR layers. The bonding strength of the new DFR was tested on silicon, glass, and titanium substrates, respectively. A maximum bonding strength of 37 MPa was obtained for the dry film photoresist laminated on glass. No leakage was found, and burst tests proved excellent robustness and sealing reliability of the microchannels.     

Microphase separation and hydrophobicity of urethane/siloxane copolymers with low siloxane content

Polyurethane–siloxane thermoset copolymers were obtained from Isophorone diisocyanate trimer, Polycaprolactone triol and 10% of hydroxy terminated Polydimethyl siloxane. The copolymers showed a phase separated structure that depended on the conversion of the reaction and casting temperature. The different samples obtained had water contact angles higher than 90°. Moreover the contact angle values presented a maximum at intermediate reaction conversion. Although FTIR measurements showed that siloxane concentration at the surface increased with reaction time, the maximum contact angle value was related to the higher roughness calculated from AFM images. DMTA results confirmed that the phase separation was higher at intermediate conversions.     

Flexible Blade‐Coated Multicolor Polymer Light‐Emitting Diodes for Optoelectronic Sensors

A method to print two materials of different functionality during the same printing step is presented. In printed electronics, devices are built layer by layer and conventionally only one type of material is deposited in one pass. Here, the challenges involving printing of two emissive materials to form polymer light‐emitting diodes (PLEDs) that emit light of different wavelengths without any significant changes in the device characteristics are described. The surface‐energy‐patterning technique is utilized to print materials in regions of interest. This technique proves beneficial in reducing the amount of ink used during blade coating and improving the reproducibility of printed films. A variety of colors (green, red, and near‐infrared) are demonstrated and characterized. This is the first known attempt to print multiple materials by blade coating. These devices are further used in conjunction with a commercially available photodiode to perform blood oxygenation measurements on the wrist, where common accessories are worn. Prior to actual application, the threshold conditions for each color are discussed, in order to acquire a stable and reproducible photoplethysmogram (PPG) signal. Finally, based on the conditions, PPG and oxygenation measurements are successfully performed on the wrist with green and red PLEDs.