Survey of MRI Usefulness for the Clinical Assessment of Bone Microstructure

Bone microarchitecture has been shown to provide useful information regarding the evaluation of skeleton quality with an added value to areal bone mineral density, which can be used for the diagnosis of several bone diseases. Bone mineral density estimated from dual-energy X-ray absorptiometry (DXA) has shown to be a limited tool to identify patients’ risk stratification and therapy delivery. Magnetic resonance imaging (MRI) has been proposed as another technique to assess bone quality and fracture risk by evaluating the bone structure and microarchitecture. To date, MRI is the only completely non-invasive and non-ionizing imaging modality that can assess both cortical and trabecular bone in vivo. In this review article, we reported a survey regarding the clinically relevant information MRI could provide for the assessment of the inner trabecular morphology of different bone segments. The last section will be devoted to the upcoming MRI applications (MR spectroscopy and chemical shift encoding MRI, solid state MRI and quantitative susceptibility mapping), which could provide additional biomarkers for the assessment of bone microarchitecture.     

Fermentation of salmon fillets with a variety of lactic acid bacteria

The influence of five strains of lactic acid bacteria (four Lactobacillus and one Carnobacterium) on the quality of fermented salmon fillets was studied. Best starter growth (increase of more than 1 log in 3 days) and acidification of muscle (e.g. pH reduction of approximately 0.7 units in 5 days) were achieved with the two commercial strains L. sake LAD and L. alimentarius BJ33. pH reduction was consistently lower (e.g. reduction of 0.2 units in 5 days) with C. piscicola 85. Protein breakdown as observed on SDS-PAGE gels was similar for all strains. In contrast, the starter strain did influence texture and colour changes. Fast acidifying strains L. sake LAD and L. alimentarius BJ33 brought about a firmer overall texture and a lighter colour, while softening of flesh occurred in samples processed with C. piscicola 85. Sensory evaluations indicated that samples processed with fast acidifying strains were preferred. L. sake LAD and L. alimentarius BJ33 are regarded as suitable starters for fermentation of salmon fillets.     

Heuristiques et effets cognitifs dans l'évaluation du risque.

Studied the influence of various cognitive modalities on risk assessment. Human Ss: 78 normal male and female French adults (university students). Ss were presented with information related to a potential environmental danger and asked to evaluate the degree of risk. The information involved 3 categories of data presented under 3 experimental conditions: representativeness, availability, and anchoring of the relevant information. A control condition offering no information on which to base the risk assessment was also included. Subjective evaluations of the degree of risk served as the dependent variable. (English abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The relationship between fatty acid peroxidation and α-tocopherol consumption in isolated normal and transformed hepatocytes

The response of normal and transformed rat hepatocytes to oxidative stress was investigated. Isolated normal rat hepatocytes and differentiated hepatoma cells (the Fao cell line was derived from the Reuber H 35 rat hepatoma) in suspension were incubated with the ADP/Fe³⁺ chelate for 30 min at 37°C. Membrane lipid oxidation was assessed by measuring (i) free malondialdehyde (MDA) production by a high-performance liquid chromatography (HPLC) procedure, (ii) membrane fatty acid disappearance as judged by capillary gas chromatography, and (iii) α-tocopherol oxidation as determined by HPLC and electrochemical detection. The addition of iron led to increased MDA production in normal as well as in transformed cells, and to simultaneous consumption of polyunsaturated fatty acids (PUFA) and α-tocopherol. In addition, in Fao cells more α-tocopherol was consumed during lipid peroxidation while less PUFA was oxidized. Lipid peroxidation was lower in tumoral hepatocytes than in normal cells. This could be due to a difference in membrane lipid composition because of a lower PUFA content and a higher α-tocopherol level in Fao cells. During oxidation, Fao cells produced 1.5 to 2 times less MDA than normal cells, while in the tumoral cells the amount of oxidized PUFA having 3 or more double bonds was 7 to 8 times lower. Therefore, measuring MDA alone as an index of lipid peroxidation did not allow for proper comparison of the membrane lipid oxidizability of transformed cellsvs. the membrane lipid oxidizability of normal cells.     

Electrical properties of the SnO2-based varistor

The non-linear electrical properties of CoO-doped and Nb2O5-doped SnO2 ceramics were characterized. X-ray diffraction and scanning electron microscopy indicated that the system is single phase. The electrical conduction mechanism for low applied electrical field was associated with thermionic emission of the Schottky type. An atomic defect model based on the Schottky double-barrier formation was proposed to explain the origin of the potential barrier at the ceramic grain boundaries. These defects create depletion layers at grain boundaries, favouring electron tunnelling at high values of applied electrical field. © 1998 Chapman & Hall     

Interstitial delivery of carboplatin via biodegradable polymers is effective against experimental glioma in the rat

PURPOSE: Carboplatin has shown promise experimentally as an antineoplastic agent against both primary central nervous system (CNS) tumors and several solid tumors that frequently metastasize to the brain. Unfortunately, carboplatin is limited in its clinical use for tumors in the CNS by systemic toxicity and poor penetration through the blood brain barrier. Recent advances in polymer technology have made feasible the intracranial implantation of a biodegradable polymer capable of local sustained delivery of chemotherapy for brain neoplasms. This study assessed the toxicity and efficacy of carboplatin delivered from intracranial sustained release polymers in the treatment of experimental gliomas in rodents. METHODS: Two biodegradable anhydride polymer systems were tested: a copolymer of 1,3-bis-(p-carboxyphenoxy propane) and sebacic acid, and a copolymer of fatty acid dimer and sebacic acid. The polymers were loaded with carboplatin and dose escalation studies evaluating toxicity were performed by implanting carboplatin-loaded polymers into the brains of rats. Next, efficacy was tested. F-98 glioma cells were injected intracranially into rats, and 5 days later polymers containing the highest tolerated doses were implanted at the site of tumor growth. The survival of animals receiving carboplatin-loaded polymer was compared with that of animals receiving intraperitoneal doses of the same agent. RESULTS: Carboplatin-polymer was well tolerated at doses up to 5% loading in both polymer systems. Locally delivered carboplatin effectively prolonged survival of rats with F98 gliomas. Maximal treatment effect was seen with 5% loading of either polymer, with median survival increased threefold over control (P < 0.004). Systemic carboplatin also significantly prolonged survival, but the best intracranial polymer dose was significantly more effective than the best systemic dose tested. CONCLUSIONS: Carboplatin can be safely delivered intracranially by biodegradable sustained- release polymers. This treatment improves survival in rodents with experimental gliomas, with locally delivered carboplatin being more effective than systemic carboplatin.     

Trifluoperazine increases fatty acid turnover in phospholipids in cultured human fibroblasts

A 24-hr pretreatment of cultured human fibroblasts with trifluoperazine induced a marked increase in incorporation of saturated (stearic, palmitic) and unsaturated (oleic, arachidonic) fatty acids into phospholipids (1.5- to 2-fold for 5.10⁻⁵ M trifluoperazine). Concomitantly, incorporation into cholesteryl esters was strongly inhibited (20% of control for 5.10⁻⁵ M trifluoperazine). The drug did not change the phospholipid composition of treated cells. The effect of trifluoperazine on oleic acid incorporation into phospholipids was time-dependent and reached a maximum after a six-hr preincubation with the drug. Trifluoperazine also induced an increase in the rate of chase of oleic acid from the different phospholipid classes. In vitro preincubation of cell-free extracts with trifluoperazine resulted in activation of phospholipid acyltransferases, whereas cholesterol acyltransferase activity was decreased. The rapid effect of trifluoperazine together with its effect on a cell-free system suggests a direct action of this amphiphilic drug on the acyltransferase activities, probably by modification of the structural organization of cellular membranes.     

Effect of extrusion-cooking on the hypoglycaemic properties of citrus fibre: An in-vitro study

Orange and lemon peels were extruded under controlled conditions of varying severity, and their physico-chemical characteristics and effect on the enzymatic hydrolysis of starch and glucose diffusion were studied. Extrusion-cooking treatment increased the soluble fraction of dietary fibre as well as solubilised pectic substances and arabino-galactomannan chains. The apparent viscosities of aqueous extracts of extruded fibre were increased slightly for orange and more markedly for lemon fibre. With both fibre sources, viscosities values were higher in Tris-maleate buffer (0.1 M) than in NaCl (154 mM). However, these modifications had no effect on starch hydrolysis and glucose diffusion in vitro.     

Influence of Solvent Additive 1,8‐Octanedithiol on P3HT:PCBM Solar Cells

Processing solvent additives in polymer:fullerene bulk heterojunction systems are known as a promising method to enhance photovoltaic performance. It is generally agreed that solvent additives enable polymers to have a high degree of molecular order which increases the device performance. However, the understanding of the efficiency enhancement is not complete. There is a lack of insight regarding the quantitative determination of the molecular miscibility between polymer and fullerene as well as the inner morphology changes induced by the additives. In this work, understanding of the influence of the solvent additive 1,8‐octanedithiol (ODT) is provided on the classic system poly(3‐hexylthiophene‐2,5‐diyl):[6,6]‐phenyl‐C61 butyric acid methyl ester (P3HT:PCBM) films. The impact on polymer crystallinity, surface structure, inner morphology, and quantitative molecular miscibility of P3HT and PCBM is studied as a function of ODT volume concentration. The crystallinity is probed with absorption spectroscopy and grazing incidence wide‐angle X‐ray scattering. The morphology and miscibility are characterized via atomic force microscopy and time‐of‐flight grazing incidence small angle neutron scattering. Besides an increased crystallinity and prominent phase separation, ODT increases the solubility of PCBM in P3HT and reduces the size of amorphous P3HT domains. Moreover, solvent processing with a high ODT concentration alters the vertical material composition of the active layer.     

Computational personality recognition in social media

A variety of approaches have been recently proposed to automatically infer users’ personality from their user generated content in social media. Approaches differ in terms of the machine learning algorithms and the feature sets used, type of utilized footprint, and the social media environment used to collect the data. In this paper, we perform a comparative analysis of state-of-the-art computational personality recognition methods on a varied set of social media ground truth data from Facebook, Twitter and YouTube. We answer three questions: (1) Should personality prediction be treated as a multi-label prediction task (i.e., all personality traits of a given user are predicted at once), or should each trait be identified separately? (2) Which predictive features work well across different on-line environments? and (3) What is the decay in accuracy when porting models trained in one social media environment to another?