Experimental demonstration of soliton data transmission over unlimited distances with soliton control in time and frequency domains

A 2/sup 9/-1 pseudorandom-binary-sequence soliton signal has been transmitted experimentally over one million km for the first time with no degradation in the bit error rates. The synchronous modulator was driven by a timing clock signal extracted from the transmitting data signal. These results mean that it is possible to send soliton data signals over unlimited distances through the use of soliton control in the time and frequency domains.<>     

S/N and error rate performance in AlGaAs semiconductor laser preamplifier and linear repeater systems

The applications of AlGaAs semiconductor laser preamplifier and linear repeaters in single mode optical fiber transmission systems were studied through the baseband signal-to-noise ratio and bit error rate performance measurement. Experiments were carried out with the Fabry-Perot cavity laser amplifiers whose characteristics are improved by reducing the input mirror reflectivity to 6 percent. The use of a preamplifier improves the minimum detectable power by 7.4 dB over the Si-APD direct detection level when the received signal is amplified by 30 dB before photodetection. The use of two linear repeaters increases the regenerative repeater gain by 37 dB. These experimental results are in good agreement with theoretical predictions based on the photon statistic master equation analysis.     

Design feasibility of a single-mode optical isolator

Isolator conditions are derived by a perturbation method for optical slab isolators in which magnetooptical crystal and anisotropic dielectric crystal films are integrated for reciprocal and non-reciprocal TE-TM mode conversion functions. The general expressions show that isolator conditions can be satisfied for any combination of wavelength, normalized frequency, waveguide thickness, and gyrotropic constant of the magnetooptical crystal by appropriate choice of the magnitude of the birefringence of the top layer film and its crystal orientation angle. Design examples of single-mode isolators with waveguide thicknesses of 4, 4.5, and 5 μm are given at 1.55 μm wavelength. It is also pointed out that isolators of the above design can be fabricated with Y3Fe5O12, Y1.5Gd1.5Fe3O12, and Tm3Fe5O12crystal films as magnetooptical materials and a solid solution of LiNbO3and LiTaO3as an anisotropic film. Tolerance in the required film thickness becomes less stringent with this design. Isolation of more than 20 dB with an insertion loss of less than 0.12 dB is feasible without any parameter adjustment, even when there is as much as a ten percent deviation in the film thickness.     

Characteristics of Gbit/s optical receiver sensitivity and long-span single-mode fiber transmission at 1.3 µm

Sensitivity of a 1.3 μm Ge APD receiver was measured at data rates ranging from 100 Mbits/s to 2 Gbits/s, using a high-speed GaAs FET RZ driver, low-noise Si bipolar transistor (BIT) receiver amplifier, and a highly sensitive TD comparator. The required received optical level at a 10^-9error rate was -31.9 dBm for 2 Gbits/s with a Ge APD/Si BIT front end having a 50 Ω input impedance. A Ge APD/ GaAs FET front end, with a 500 Ω input impedance, brought about 2 dB improvement at 100 Mbits/s, as compared with a Ge APD/Si BIT (50 Ω) front end. A coupling loss of 4 dB, achieved by a hemispherical microlens tipped on a single-mode fiber, and a low fiber loss of 0.57 dB/km, including splice loss, enabled 44.3 km single-mode fiber transmission at 2 Gbits/s. The 1.3 μm transmission system has a data rate repeater-spacing product of 88.6 (Gbit/s)km. Prospects of Gbit/s receiver sensitivity and the 2 Gbit/s transmission system, with more than 50 km repeater spacing, are also discussed.     

Topical Phenomena Observed in a Short-Gap Atmospheric Discharge Using Rotor and Post Electrodes

Correlation of light emission, discharge structure, waveform of the discharge current, electrode configuration, and electromagnetic radiation is examined with the intent of obtaining an effective means for preventing electromagnetic interference (EMI) due to a short-gap discharge. The electromagnetic radiation (EMR) level resulting from a current step which, in turn, was formed by a discrete movement of a cathode spot was clearly recognized. A combination of needle rotor and needle post gave the smallest electromagnetic radiation level in the experiments.     

S/N performance of an AlGaAs laser preamplifier and a linear repeater system

Baseband signal-to-noise-ratio characteristics in an AlGaAs laser preamplifier and a linear repeater system were studied theoretically and experimentally. The AlGaAs laser preamplifier improved the minimum detectable power by 1.6 dB over the level achieved by direct detection with an Si APD. 37 dB regenerative repeater gain was experimentally obtained in the system with two optical repeaters at 100 Mbit/s data rate.     

Microstructure Development and Dielectric Properties of Potassium Strontium Niobate Ceramics

Sintering of a KSr₂Nb₅O₁₅ powder compact at 1350°C resulted in a duplex structure. Prefiring of the compact between 1200° and 1300°C inhibited the abnormal grain growth responsible for the duplex structure. The Curie temperature and dielectric constant were dependent on the microstructure.     

Ceramic Dental Molds for the Precision Casting of Titanium and Titanium Alloys: I, Relationship between Particle-Size Distribution of Aggregates and Mold Expansion

A new ceramic dental mold can cast excellent Ti restoratives by controlling expansion due to the oxidation of additive metal particles. The packing structure of the metal and aggregate particles in the mold can be considered a function of the size distribution of the aggregate grains. An investigation of the expansion mechanism reveals three different relationships of void fraction versus linear thermal expansion for the molds at the high temperature under which oxidation of the metal particles occurs. Room-temperature casting, favorable for making high-quality Ti restoratives, can also be achieved by precisely controlling both the amount of additive metal powder and the compositional distribution of aggregate grain sizes in the mold.     

Transmission characteristics of optical waveguides with multiquantum-well structures

The fundamental modes in an optical waveguide with multiquantum-well structure are analysed by the matrix method. It is found that the separation between the propagation constants of the TE and TM waves is relatively large and that the equivalent planar slab guide approximation is available only for TE waves.     

Strength Analysis of Yttria-Stabilized Tetragonal Zirconia Polycrystals

Tensile strength of Y₂O₃-stabilized ZrO₂ polycrystals (Y-TZP) was measured by a newly developed tensile testing method with a rectangular bar. The tensile strength of Y-TZP was lower than that of the three-point bend strength, and the shape of the tensile strength distribution was quite different from that of the three-point bend strength distribution. It was difficult to predict the distribution curve of the tensile strength using the data of the three-point bend strength by one-modal Weibull distribution. The distribution of the tensile strength was analyzed by two- or three-model Weibull distribution coupled with an analysis of fracture origins. The distribution curve of the three-point bend strength which was estimated by multimodal Weibull distribution agreed favorably with that of the measured three-point bend strength values. A two-modal Weibull distribution function was formulated approximately from the distributions of the tensile and three-point bend strengths, and the estimated two-modal Weibull distribution function for the four-point bend strength agreed well with the measured four-point bend strength.