Fabrication of Nanocomposite Ceramics by Crystallization of Rapidly Solidified Eutectic Melts

Eutectic melt solidification is shown to avoid cracking during solidification by quenching an amorphous phase. Subsequent annealing results in micro/nanostructure ceramics. This strategy has been applied to HfO₂–Al₂O₃–GdAlO₃ and Y₂O₃–CaO–Al₂O₃ ternary systems that have deep eutectics. In most cases, ceramic materials cracks when they are solidified from melt due to the thermal stress accumulated on the grain boundaries, the large specific volume difference between the melt and the crystalline solid, etc. The main reason why this strategy works is that a eutectic composition yields an amorphous phase from the melts by rapid cooling and the amorphous phase enables to design crystallization without cracking by postannealing. Appropriate postannealing for the quenched amorphous enables to control the crystallization behavior from the amorphous phase, which yields nanostructured composites without cracking. For the HfO₂–Al₂O₃–GdAlO₃ case, the melt solidification and postannealing yields a nanocomposite with high transparency due to reduced scattering of 5–10 nm crystallites. For the Y₂O₃–CaO–Al₂O₃ case, a plate-shaped bulk composite is obtained without cracking by molding the melt and postannealing.     

Anaerobic Biodegradation Tests of Poly(lactic acid) under Mesophilic and Thermophilic Conditions Using a New Evaluation System for Methane Fermentation in Anaerobic Sludge

Anaerobic biodegradation tests of poly(lactic acid) (PLA) powder were done at the thermophilic (55 °C) and mesophilic temperature (35 °C) under aquatic conditions [total solid concentrations of the used sludge were 2.07% (at 55 °C) and 2.24% (at 35 °C)] using a newly developed evaluation system. With this system, the evolved biogas is collected in a gas sampling bag at atmospheric pressure. This method is more convenient than using a pressure transducer or inverted graduated cylinder submerged in water. PLA was degraded about 60% in 30 days, about 80% in 40 days and about 90% in 60 days at 55 °C. On the other hand, the PLA degradation started in 55 days at 35 °C and degradation rate was much slower than at 55 °C.     

Optical and electrical anisotropies of polydiacetylene derivative film aligned by shear stress

The molecular alignment of polydiacetylene (PDA) derivatives and their optical and electrical properties of thin films based on PDA derivatives have been studied. The PDA derivatives were aligned depending on the direction of applied shear stress in the film. From measurements of the polarized absorption and current–voltage characteristics, the optical and electrical anisotropies have been observed, that was discussed by taking the PDA main chain alignment into consideration.     

Laser manipulation of micro untransmissive particles in water

The laser trapping of untransmissive particles are discussed in this paper. Photon can generate the momentum to the untransmissive particle by diffraction and reflection on the surface of the particles. We tried laser trapping of untransmissive particles using an attractive force caused by the diffraction and radiation force caused by reflection. The laser trapping system includes CW YAG laser, which has 1.064 μm in wave length and an optical microscope. The motions of particles were monitored by a CCD camera on the top of the microscope and recorded by PC connected to the CCD camera.     

One-step formation of ethyl methyl ketone from 1-butene and water on ultrastable Y-type zeolite catalyst

Proton exchanged ultrastable Y-type zeolite with silica/alumina = 40 showed a pronounced catalytic activity for the formation of ethyl methyl ketone directly from 1-butene and water. The formation rate of ethyl methyl ketone was much higher than those on MoO₃-based catalysts in the oxidation of 1-butene by oxygen. It was suggested that the basic site necessary for the formation of ethyl ketone directly from 1-butene and water would be the pentacoordinated Al.     

Hydrophobic effects on protein/nucleic acid interaction: enhancement of substrate binding by mutating tyrosine 45 to tryptophan in ribonuclease Tl

Hydrophobic effects on binding of ribonuclease Tl to guaninebases of several ribonucleotides have been proved by mutatinga hydrophobic residue at the recognition site and by measuringthe effect on binding. Mutation of a hydrophobic surface residueto a more hydrophobic residue (Tyr45 – Trp) enhances thebinding to ribonucleotides, including mononucleotide inhibitorand product, and a synthetic substrate-analog trinudeotide aswell as the binding to dinucleotide substrates and RNA. Enhancementson binding to non-substrate ribonucleotides by the mutationhave been observed with free energy changes ranging from –2.2 to – 3 .9 kJ/mol. These changes are in good agreementwith that of substrate binding, –2.3 kJ/mol, which iscalculated from Michaelis constants obtained from kinetic studies.It is shown, by comparing the observed and calculated changesin binding free energy with differences in the observed transferfree energy changes of the amino acid side chains from organicsolvents to water, that the enhancement observed on guaninebinding comes from the difference in the hydrophobic effectsof the side chains of tyrosine and tryptophan. Furthermore,a linear relationship between nucleolytic activities and hydrophobicityof the residues (Ala, Phe, Tyr, Trp) at position 45 is observed.The mutation could not change substantially the base specificityof RNase Tl, which exhibits a prime requirement for guaninebases of substrates.     

Stable and Metastable Phase Relationships in the System ZrO2–ErO1.5

Stable and metastable phase relationships in the system ZrO₂–ErO_1.5 were investigated using homogeneous samples prepared by rapid quenching of melts and by arc melting. The rapidly quenched samples were annealed in air for 48 h at 1690°C or for 8 months at 1315°C. Two tetragonal phases ( t - and t '-phases) were observed after quenching samples heated at 1690°C to a room temperature, whereas one t -phase and cubic ( c -) phase were found in those treated at 1315°C. Since the t '-phase is obtained through a diffusionless transformation during cooling from a high-temperature c -phase, t - and c -phases can coexist at high temperature. The t - and c -phases field spans from 4 to 10 mol% ErO_1.5 at 1690°C and from 3 to 15 mol% ErO_1.5 at 1315°C. The equilibrium temperature T ^t-m ₀ between the t - and monoclinic ( m -) phases estimated from A_s and M_s temperatures decreased with increasing ErO_1.5 contents.     

Recent developments in processing systems for cell and tissue cultures toward therapeutic application

Innovative techniques of cell and tissue processing, based on tissue engineering, have been developed for therapeutic applications. Cell expansion and tissue reconstruction through ex vivo cultures are core processes used to produce engineered tissues with sufficient structural integrity and functionality. In manufacturing, strict management against contamination and human error is compelled due to direct use of un-sterilable products and the laboriousness of culture operations, respectively. Therefore, the development of processing systems for cell and tissue cultures is one of the critical issues for ensuring a stable process and quality of therapeutic products. However, the siting criterion of culture systems to date has not been made clear. This review article classifies some of the known processing systems into ‘sealed-chamber’ and ‘sealed-vessel’ culture systems based on the difference in their aseptic spaces, and describes the potential advantages of these systems and current states of culture systems, especially those established by Japanese companies. Moreover, on the basis of the guidelines for isolator systems used in aseptic processing for healthcare products, which are issued by the International Organization for Standardization, the siting criterion of the processing systems for cells and tissue cultures is discussed in perspective of manufacturing therapeutic products in consideration of the regulations according to the Good Manufacturing Practice.     

Variations in polymeric structure of ferroelectric poly(vinylidene fluoride) films during annealing at various temperatures

To clarify the thermal degradation mechanisms of uniaxially drawn poly(vinylidene fluoride) (PVDF) films, variations due to annealing in the polymeric structures of the films were investigated using the small‐angle X‐ray scattering (SAXS) and Fourier transform infrared (FTIR) spectroscopy. The films were composed of lamellar crystals that were stacked perpendicular to the stretch direction. Although the crystallinity of the films decreased during annealing in the temperature range above the preannealing temperature, the lamellar structure was maintained even after the annealing process. There are two kinds of irreversible relaxation mechanisms during the annealing process of the films, including both a decrease in crystallinity within the lamellae and also thickening of the lamellae. A significant lamella thickening effect was observed when the films were annealed above ～ 100°C. FTIR spectra suggested some disordered structures are developed during thickening of the lamellae. Furthermore, a long‐range periodic structure was formed in the films that were annealed above the melting temperature of PVDF. The polymeric structures formed during the fabrication process (including high‐order structures and disorders in molecular conformation) were clarified as having a significant influence on the annealing behavior of ferroelectric PVDF films. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Hydration behavior of perfluorinated and hydrocarbon-type proton exchange membranes: Relationship between morphology and proton conduction

The relationships between morphology and proton conduction for Nafion membranes and hydrocarbon-type proton exchange membranes, namely, sulfonated poly(arylene ether ether ketone) (S-PEEK) and sulfonated poly(arylene ether sulfone) (S-PES), were investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The direct simultaneous observation of surface morphology and active regions of proton conduction on membranes by combined high-resolution AFM phase imaging and an electrochemical technique at controlled humidity provided significant morphological information, particularly for the hydrocarbon-type membranes that exhibit few or no features on SAXS profiles. For the Nafion membranes, the active proton paths became denser and congregated with each other at over 60% RH, resulting in the formation of well-connected networks. For the hydrocarbon-type membranes, however, only the relatively small and dispersed proton paths were observed, which showed no significant change even as water content increased. We have demonstrated that the differences in microscopic morphology between the Nafion and hydrocarbon-type membranes are associated with the differences between their macroscopic proton conductivities.