水环境对热塑性复合材料层合板分层疲劳裂纹扩展的影响

本文研究了水环境对ICIAPC-2热塑性预浸料(AS4/PEEK)制成的单向复合材料层合板分层疲劳裂纹扩展的影响.用双悬臂梁试件进行了I型张开位移加载试验.试验环境为23℃水中和50℃水中.水环境未引起很大的不利影响.用电子显微镜和机理分析讨论了水环境对CF/PEEK和CF/环氧两种层合板的差异.     

Characteristics of a continuous Si-Ti-C-O fibre with low oxygen content using an organometallic polymer precursor

A continuous Si-Ti-C-O fibre with 12 wt% oxygen content, which is lower than the usual 18 wt% found in the normal fibres, was synthesized by using polytitanocarbosilane which has fewer Si-Si bonds than the usual precursor polymer. The density, tensile strength, tensile modulus and thermal conductivity were found to be 2.37 g cm^–3, 3.4±0.3 GPa, 190±10 GPa and 1.40 W m^–1 K^–1, respectively. Amongst these properties, the tensile modulus was improved by 20 GPa and the thermal conductivity had a higher value in comparison with that of the ordinary Si-Ti-C-O fibre with 18 wt% oxygen content. The Si-Ti-C-O fibre with a 12 wt% oxygen content has a better heat resistance above 1400 °C in an argon atmosphere and 1300 °C in air, than the usual fibre. About 60 and 40% of its tensile strength at room temperature were retained in air at respectively, 1500 and 1600 °C. This improved ceramic fibre is considered to be useful as a reinforcing material for advanced composites such as high-temperature ceramic matrix composites and metal matrix composites.     

Gas detection by structural variations of fluorescent guest molecules in a flexible porous coordination polymer

The development of a new methodology for visualizing and detecting gases is imperative for various applications. Here, we report a novel strategy in which gas molecules are detected by signals from a reporter guest that can read out a host structural transformation. A composite between a flexible porous coordination polymer and fluorescent reporter distyrylbenzene (DSB) selectively adsorbed CO? over other atmospheric gases. This adsorption induced a host transformation, which was accompanied by conformational variations of the included DSB. This read-out process resulted in a critical change in DSB fluorescence at a specific threshold pressure. The composite shows different fluorescence responses to CO? and acetylene, compounds that have similar physicochemical properties. Our system showed, for the first time, that fluorescent molecules can detect gases without any chemical interaction or energy transfer. The host-guest coupled transformations play a pivotal role in converting the gas adsorption events into detectable output signals.     

Production of Fullerenes by Combustion

The progress in the production of fullerenes from flaming soot is reviewed in terms of the experimental conditions, characteristics in the product distribution, and formation mechanisms.     

The use of indoline dyes in a zinc oxide dye-sensitized solar cell

The effects of the position and the type of carboxyl anchor group in double rhodanine-type indoline dyes on the performance of a zinc oxide dye-sensitized solar cell were examined. The optimum position for the carboxymethyl group was on the inner rhodanine moiety; a carboxymethyl group gave optimum results among carboxymethyl, -ethyl, and -propyl derivatives.     

Thermodynamic assessment of systems of actinide or rare earth with Cd

A pyrometallurgical process is being developed for recycling nuclear reactor fuels. Thermodynamic information on multicomponent systems of actinides and rare earths (REs) with liquid Cd is very useful in the design of a process in which a liquid Cd electrode is used for the selective recovery of Pu and U, and a reductive extraction process using a molten salt/liquid Cd system for the recovery of minor actinides, such as Np, Pu, etc. A key issue in the design of these processes is a variation in solubility or activity of actinides or REs in multielement systems. In the present study, phase diagrams of U-Cd, Pu-Cd, Np-Cd, Y-Cd, La-Cd, Ce-Cd, Pr-Nd, Nd-Cd, and Gd-Cd were optimized by the CALPHAD method. For these systems, thermodynamic data, such as the activity of solutes in liquid Cd and the Gibbs energies of formation of the intermetallic compounds as well as the phase diagram data were available for the optimization. For optimization, the calculated primary results were entered into a database. Then, some ternary systems were preliminarily assessed through the use of the optimized data for the binary systems. Two extreme conditions were assumed: one condition was complete miscibility between the compounds that have the same mole ratio between solutes and Cd; the other condition was no solid solubility between the compounds. The results indicated the tendencies toward solubility and activity of actinides and REs in multielement systems.     

Safety Analysis of ITER EDA Design by GEMSAFE

General Methodology of Safety Analysis and Evaluation for Fusion Systems (GEMSAFE) was applied to the International Thermonuclear Experimental Reactor (ITER) design in the stage of Engineering Design Activities (EDA) to identify Design Basis Events (DBEs) and the related safety features, which were compared with those of the ITER design in the stage of Conceptual Design Activities (CDA). As a result, 18 DBEs for the EDA design were selected in comparison with 25 DBEs for the CDA design. DBEs related to the fuel area were categorized in higher event category than those of the CDA design due to the increase of the mobile tritium contained in some components. It was necessary to reduce the inventory of the tritium absorbed in the tokamak dust in the EDA design as well as in the CDA design. Some measures were recommended to reduce mobile tritium dissolved in the coolant in the single cooling loop due to the increase of this estimated inventory.     

Fitting a woven cloth model to a curved surface: dart insertion

If a woven cloth composite “ply” cannot fit a surface exactly, “darts” must be cut. Algorithms that define these darts for a CAD system resolve anomalies in the 3D ply     

Isolation of Campylobacter spp. from slaughtered cattle and swine on blood-free selective medium

The charcoal-cefazolin-sodium deoxycholate agar (CCDA) was compared with Butzler agar for selectivity of campylobacters from fecal samples. A total of 279 samples of cecal contents from 176 cattle and 103 pigs slaughtered in Saitama were examined. Fifty-five (31.3%) cattle were found to contain campylobacters by the direct plating culture on CCDA plates, compared with 29 (16.5%) on Butzler agar plates. The positive rates of pig samples on CCDA and Butzler agar were very high, being 96 (93.2%) and 86 (83.5%), respectively. After enrichment culture of 107 cattle specimens in Preston, CEM or Bu 10 broth, the isolation rate on CCDA was also higher (p < 0.01) than that on Butzler agar after enrichment in any medium. These results indicate that CCDA medium is easy to handle without blood and, as to this study shows, is superior to Butzler agar for isolation of Campylobacter species from fecal samples.