HVEM study of crack-tip dislocations in Si crystals prepared by FIB and twin-blade cutting method

Crack-tip dislocations in silicon crystals have been examined by using high-voltage electron microscopy. Cracks were introduced by the Vickers indentation method at room temperature and the indented specimens were annealed at high temperatures to induce dislocations around crack tips under the presence of residual stress due to the indentation. A selected area around a crack tip was thinned by a focused ion beam (FIB) technique. Specimens were thinned in advance by a twin-blade cutting (TBC) method, which is a simple cutting process for saving FIB machine time. A combination of FIB and TBC can be a useful thinning procedure for the efficient preparation of transmission electron microscopy specimens. Characteristic dislocation structures were observed around the tip of a crack, aiding the elucidation of dislocation processes, which is essential to increase the fracture toughness of materials.     

Transmission Characteristics of Hybrid Modes in Corrugated Waveguides Above the Bragg Frequency

We studied the transmission characteristics of hybrid modes in a corrugated circular waveguide above the Bragg frequency to develop a broad-band transmission line for millimeter waves. Millimeter waves at 294 GHz were transmitted into a straight waveguide. From observed power profiles in waveguide cross-sections, a high attenuation rate of 0.13 dB/m was obtained. To match a theoretical attenuation constant with the experimental one, we introduced an ad hoc coefficient of conventional surface reactance in the waveguide wall. This was necessary because the wall began to look like the surface with a decreasing anisotropic reactance owing to the frequency above the Bragg frequency. Using nonlinear optimization for mode content analysis, the observed power profiles in the waveguide cross-section were matched with theoretical profiles. There was good agreement between the calculated and observed centers of power profiles and attenuation rate along the waveguide. The theoretical analysis showed that the magnetic field at the waveguide wall increases and the substantial attenuation takes place. Above the Bragg frequency coupling to backwards propagating modes is a point of consideration. A combination of the backwards propagating EH_1,26 and the forward propagating HE₁₁ modes satisfied the Bragg condition at 294.7 GHz which was the nearest frequency of operating frequency. A strong attenuation of the incoming HE₁₁ mode by Bragg resonance was not expected due to large difference of 0.7 GHz. It becomes clear that the observed high transmission loss outside of the Bragg resonance can be explained by a decrease in anisotropic surface reactance at the wall.     

Nanowrinkled and Nanoporous Polyethylene Membranes Via Entanglement Arrangement Control

Crystalline homopolymers, including polyethylene (PE), which has the simplest architecture, form a nanometer‐sized combination of crystalline and amorphous components, but their arrangement control, similar to self‐assembled phase‐separation of block‐copolymers, is usually difficult. However, molecular entanglements trapped between crystalline and amorphous components of homopolymers coincide with the segmental linking points on the interfaces of the microphase separation for block copolymers. Nanowrinkled PE membranes are prepared with a network of 30 nm‐thick homogeneous lamellae using a novel entanglement control technique composed of biaxial melt‐drawing and melt‐shrinking procedures, which are limited for highly entangled ultrahigh molecular weight materials. Such a network arrangement of nanowrinkling lamellae spreading on membrane surface and also across the membrane thickness improves the mechanical properties of both tensile strength and tearing strength. Subsequent cold‐drawing causes delamination of the lamellar interfaces, leading to the resultant nanoporous morphology composed of passing‐through channels that are several tens of nanometers in diameter, without any solvent processing.     

Temporal-Talbot-effect-based preprocessing for pattern-effect reduction in all-optical clock recovery using a semiconductor-optical-amplifier-based fiber ring laser

We propose and experimentally demonstrate the temporal-Talbot-effect (TTE)-based preprocessing for the pattern-effect reduction in the all-optical clock recovery using a semiconductor-optical-amplifier (SOA)-based fiber ring laser (SOA-FRL). The TTE-based preprocessing successfully reduced the pattern effects of the recovered clock pulses, so that the 10-GHz clear optical clock pulses were recovered from a 10-Gbit/s return-to-zero on–off keying (RZ-OOK) pseudo-random bit sequence (PRBS) optical signal. “Peak variation” and “Pattern-dependent intensity noise (PDIN)” were proposed and were utilized as parameters to quantitatively evaluate the pattern effects, from which recovered clock pulses suffer, in the temporal domain and the frequency domain, respectively. Peak variation was reduced from 77.2% to 36.2%, and PDIN was improved from ?103 dBc/Hz to ?110 dBc/Hz with the aid of the TTE-based preprocessing. Furthermore, we examined the tolerance of the proposed technique by intentionally deviating the input signal’s bit-rate by ±190 Mbit/s (±2% of the bit-rate) from the optimum condition for the TTE. As compared with the PDIN value for the pulse train obtained by the direct injection of the non-processed signal into the SOA-FRL, the PDIN of the recovered clock pulses using the preprocessed signal indicated improvements over the entire measurement range of ±190 Mbit/s, which corresponds to the wavelength-dispersion deviation of ±56 ps/nm (±4% of the wavelength-dispersion applied to the input signal) from the optimum value.     

Detailed Analysis of Temperature Characteristics of an InGaP/InGaAs/Ge Triple-Junction Solar Cell

Temperature characteristics of an InGaP/InGaAs/Ge triple-junction solar cell were analyzed in detail using an equivalent circuit calculation. The current–voltage (I–V) characteristics of single-junction solar cells (InGaP, InGaAs, Ge solar cells) were measured at various temperatures. Fitting of I–V curves between measured and calculated data was carried out, and the diode parameters and temperature exponents of the single-junction solar cells were extracted. The parameters for each single-junction solar cell were used in the equivalent circuit model for the triple-junction solar cell, and calculations of solar cell performance were carried out. Measured and calculated results of the I–V characteristics at various temperatures agreed well.     

What do architects and students perceive in their design sketches? A protocol analysis

The present research aims at examining what information architects think of and read off from their own freehand sketches, and at revealing how they perceptually interact with and benefit from sketches. We explored this in a protocol analysis of retrospective reports; each participant worked on an architectural design task while drawing freehand sketches and later reported what she/he had been thinking of during the design task. This research lies within the scope of examinations of why freehand sketches as external representation are essential for crystallizing design ideas in early design processes.     

Detection of genetically modified organisms in foreign-made processed foods containing corn and potato

Investigations of the validity of labeling regarding genetically modified (GM) products were conducted using polymerase chain reaction (PCR) methods for foreign-made processed foods made from corn and potato purchased in the Tokyo area and in the USA. Several kinds of GM crops were detected in 12 of 32 samples of processed corn samples. More than two GM events for which safety reviews have been completed in Japan were simultaneously detected in 10 samples. GM events MON810 and Bt11 were most frequently detected in the samples by qualitative PCR methods. MON810 was detected in 11 of the 12 samples, and Bt11 was detected in 6 of the 12 samples. In addition, Roundup Ready soy was detected in one of the 12 samples. On the other hand, CBH351, for which the safety assessment was withdrawn in Japan, was not detected in any of the 12 samples. A trial quantitative analysis was performed on six of the GM maize qualitatively positive samples. The estimated amounts of GM maize in these samples ranged from 0.2 to 2.8%, except for one sample, which contained 24.1%. For this sample, the total amount found by event-specific quantitative analysis was 23.8%. Additionally, Roundup Ready soy was detected in one sample of 21 potato-processed foods, although GM potatoes were not detected in any sample.     

Shear properties of metal-free wooden load-bearing walls using plywood jointed with a combination of adhesive tape and wood dowels

In this study, the potential of wood-only (metal-free) load-bearing walls was proposed and tested based on the idea of using the same type of material throughout wherever possible while improving basic properties such as strength, sound insulation, and heat insulation. Specifically, a technique was tested of combining pressure sensitive adhesive tape and wood dowels in place of nails for load-bearing structures with panel reinforcement represented by wood-frame construction. For this paper, its strength was evaluated by conducting in-plane shear tests, which revealed that the initial rigidity and maximum load of the proposed test specimens were greater than that of specimens using nails for jointing. However, the shear load factor, which is calculated based on some strength parameters and which forms the foundation of housing strength design, was slightly lower than that of the nail-jointed specimen. This was because there was a large decline in post-collapse resistance and a lower calculated absorbed energy caused by brittleness. The early detachment of panels was also revealed as a problem in the tests.     

Investigation of pathways of advanced glycation end-products accumulation in macrophages

Advanced glycation end-products (AGE) play a role in the pathogenesis of several diseases, including diabetic complications and atherosclerosis. In atherosclerotic lesions of human aortas, AGE are localized in the extracellular matrix and intracellularly in foam cells. Two interpretations are possible for AGE accumulation inside macrophages, one is endocytic uptake of extracellular AGE-proteins by scavenger receptors; the other is intracellular AGE formation inside the macrophages. In the present study, we determined the pathways involved in AGE accumulation inside macrophages. RAW 264.7 cells, a murine macrophage cell line, incubated with BSA and 1600 mM glucose for 40 weeks, recognized heavily modified AGE- BSA. In contrast, the cells showed no ligand activity for mildly modified AGE-BSA, prepared by incubating BSA with 50 mM glucose for 24 weeks. Nepsilon-(carboxymethyl)lysine (CML)-modified proteins of about 65 kDa were detected in human monocyte-derived macrophages incubated for 7 days with 30 mM glucose and phorbol myristate acetate. Furthermore, CML was generated when glycated protein was incubated with hypochloric acid. Taken together, our results indicate that AGE detected inside foam cells in atherosclerotic lesions are generated intracellularly rather than representing endocytic uptake of extracellular AGE-proteins by scavenger receptors.