Curing of epoxy resin by ultrafine silica modified by grafting of hyperbranched polyamidoamine using dendrimer synthesis methodology

Hyperbranched polyamidoamine–grafted silica was prepared according to dendrimer synthesis methodology. The modified silica was dispersed uniformly in epoxy resin, and the curing of epoxy resin proceeded successfully by heating in the presence of the modified silica; the gel fraction of the epoxy resin cured by the hyperbranched polyamidoamine–grafted silica (grafting = 80.2%) reached 77% at 170°C after 48 h. The gel fraction increased with increasing terminal amino group content of the hyperbranched polyamidoamine–grafted silica. In addition, the curing ability of the silica increased by complexation of the terminal amino groups of the grafted polyamidoamine with boron trifluoride. The modulus of elasticity of the curing materials obtained using the modified silica as a curing agent was lower than that using conventional a curing agent such as ethylenediamine in the presence of untreated silica. On the other hand, the heat resistance of the curing product using the modified silica was superior to that using ethylenediamine, but no difference in glass‐transition temperature was observed. It is expected that hyperbranched polyamidoamine grafted‐silica is incorporated uniformly with chemical bonds in the matrix of the epoxy resin. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 573–579, 2001     

Synthesis of polyamides from sugar derived d-glucaric acid and xylylenediamines

d -Glucaric acid (GA) is the one of aldaric acids and is an important bio-based building block for polymers. In this study, poly(m-xylylene-acetyl glucaramide) and poly(p-xylylene-acetyl glucaramide) were synthesized from GA acetate and two kind of aromatic diamines by solution polymerization. The chemical structures of the polyamides were analyzed by nuclear magnetic resonance spectroscopy. The weight-average molecular weights ranged from 3.3 × 10³ to 1.15 × 10⁴ with a polydispersity of 1.6–1.9, depending on monomer ratio or monomer concentration in solution. The 10% decomposition temperature of the polymers was about 210 °C. Differential scanning calorimetry revealed that the polyamides exhibited no peaks attributed to crystallization or melting point, which indicated that the polyamides were amorphous. No crystalline pattern was observed in the X-ray diffractograms, supporting this result. Polarized optical microscopy observation revealed that the polyamides exhibited melting-like behavior at above 150 °C, which was attributed to glass-transition behavior. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47255.     

On the onset of fracture as a silicon-based polymer converts into the ceramic phase

Silicon-based polymers evolve into refractory ceramics when heated gradually up to ~1000°C. The conversion is accompanied by the loss of gaseous species, and by a two-fold increase in density. The shrinkage can produce microcracks if the heating rate is too high, or if the specimen is too thick. This communication builds on earlier work whereby the measurement of gas evolution, and its relationship with viscous flow, are related to the onset of fracture in disk-shaped green (polymer) samples. The onset is determined as a function of the thickness of the disks, and of the heating rate. The results are presented in the form of a processing map. The overlay with gas evolution, and strain-rate measurements, suggest that fracture initiates with the release of hydrogen and methane, starting at temperatures near 750°C.     

Low-Temperature Magnetotransport and Magnetic Properties of Cobalt-Doped Amorphous Carbon Thin Films

采用磁控共溅射方法在n型Si(100)基片上制备了一系列具有不同Co含量(x,at％)的Co掺杂非晶C颗粒薄膜,溅射温度为室温.研究了Co-C颗粒薄膜的微结构,磁输运特性及磁性能.通过优化Co含量,在低温下发现了较大的负磁电阻(MR).温度为2K、磁场为90×79.6 kA.ml时,Co含量为6.4 at％的Co-C薄膜的负磁电阻值最大,达到27.6％.随着Co含量从6.4 at％增加至16.4 at％,MR 值从27.6％逐渐减小至2.2％.电阻率ρ随温度T的变化曲线显示了线性的lnρ-T1/2关系,说明样品中电子传导遵循隧穿输运机制.     

Porous Titania Ceramic Prepared by Mimicking Silicified Wood

A porous titania ceramic with a woodlike microstructure that was analogous to silicified wood was prepared. The production of "titanified wood" was performed using the following process: (i) introduction of titanium tetraisopropoxide into wood materials via vacuum infiltration, (ii) hydrolysis of the titanium tetraisopropoxide in the cell structure to form a titania gel, and (iii) firing at a temperature of 600°–1400°C in air. The resulting titania ceramic had the same external and internal forms of the original wood.     

Molecular simulation for adsorption of chlorinated hydrocarbon in zeolites

Equilibrium and isosteric heat of adsorption for the system of chloroform and USY-type zeolite were studied. The USY-type zeolite (PQ Co., SiO₂/Al₂O₃=70) was used both as a pure crystalline powder and as granulated particles with binder. Chloroform was reagent grade. The adsorption equilibria were measured using a gravimetric method and were expressed as isotherms. A chromatographic method (i.e. pulse response of chloroform through the USY column with helium carrier) was used to get the initial slope of the isotherms. In the simulation, the GCMC method was used to calculate amounts adsorbed for various conditions. FF parameters were confidently applied. And modified structure model was effective for simulation. This paper was presented at The 5th International Symposium on Separation Technology-Korea and Japan held at Seoul between August 19 and 21, 1999.     

Hyperbranched poly(arylene ether phosphine oxide)s

Summary New AB₂ and A₂B monomers, bis(4-fluorophenyl)-4'-hydroxyphenylphosphine oxide and bis(4-hydroxyphenyl)-4'-fluorophenyl-phosphine oxide were prepared and converted to corresponding hyperbranched poly(arylene ether phosphineoxide)s with hydroxyphenyl and fluorophenyl end functional groups. While the dihydroxy monomer gave a low molecular weight polymer, the difluoro monomer produced a high molecular weight hyperbranched polymer. The glass transition temperature of the obtained polymers was 266°C and 230°C, and 5% weight loss temperature was 491 °C and 391 °C, respectively. The fluorophenyl-terminated hyperbranched polymer was soluble in CHCl₃, but the hydroxyphenyl-terminated polymer was not soluble in CHCl3 even though it has lower molecular weight than the fluorophenyl-terminated polymer, indicating that properties of the hyperbranched polymers markedly depend on end functional groups as well as their molecular weight. Received: 23 August 2000/Revised version: 19 October 2000/Accepted: 31 October 2000     

Transparent Hydroxyapatite Prepared by Hot Isostatic Pressing of Filter Cake

Hydroxyapatite powder was synthesized and formed into a compact in an aqueous medium using a filter-cake method. The compact was hot isostatically pressed at 700° to 1000°C and 100 MPa for 2 h. Fully dense, transparent materials were obtained above 800°C. Both forming and densification methods were found to be important in obtaining transparent materials.     

Tensile behavior of polypropylene blended with bimodal distribution of styrene‐ethylene‐butadiene‐styrene particle size

The objective is to characterize the effects of the bimodal distribution of rubber particles and its blend ratio on the mechanical properties of the thermoplastic polypropylene blended with two different styrene‐ethylene‐butadiene‐styrene triblock copolymer at the intermediate and high strain rates. Tensile tests are conducted at the nominal strain rates from 3 × 10^?1 to 10² (1/s). Phase morphology is investigated to estimate the bimodal rubber particle size distribution. In addition, the in situ observation is conducted during uniaxially stretching within transmission electron microscopy step by step to investigate the deformation events depending on the elongation of samples. The elastic modulus increased gradually as the blend ratio of large rubber particle increased. An increase in the rupture strain and the strain energy up to failure was found for the bimodal rubber particle distributed blend system where the blend ratios of small rubber particle and large rubber particle were same. This is because the smaller particles dominant blend systems show the bandlike craze deformation while the localized plastic deformation is taken place in the larger particles dominated blend systems. The synergistic effect of these rubber particles gives rise to a strong increase in the ductility of these bimodal rubber particle distributed polypropylene systems. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008