Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Mouse Gastric Epithelial Cells Resist CagA Delivery by the Helicobacter pylori Type IV Secretion System

The initial step in bacterial infection is adherence of the bacterium to the target cell surface. Helicobacter pylori exploits the interaction of bacterial adhesin protein HopQ with human epithelial CEACAMs (CEACAM1, 5, and 6) to stably adhere to gastric epithelial cells, which is necessary for delivery of the H. pylori CagA oncoprotein into the epithelial cells via a type IV secretion system. In contrast to human CEACAMs, however, HopQ does not interact with Ceacam1 (mouse CEACAM1) in vitro or in CHO cells ectopically expressing Ceacam1. Since the mouse genome lacks Ceacam5 and Ceacam6, no significant HopQ–Ceacam interaction may occur in mouse gastric epithelial cells. Here, we found that the mouse stomach has a much lower expression level of Ceacam1 than the expression level of CEACAM1 in the human stomach. Consistently, mouse gastric epithelial cells resist CagA delivery by cagA-positive H. pylori, and the delivery is restored by ectopic expression of human CEACAM1 or CEACAM5 in mouse gastric epithelial cells. Thus, despite the fact that mice are routinely used for H. pylori infection studies, a low expression level of Ceacam1 in the mouse stomach together with the loss or greatly reduced interaction of HopQ with Ceacams make the mouse an inappropriate model for studying the role of H. pylori-delivered CagA in gastric pathogenesis, including the development of gastric cancer.     

Effect of chloride ions on leaching rate of chalcopyrite

The effect of chloride on chalcopyrite leaching has been investigated by performing batch leaching tests with three kinds of leaching solutions and using Hiroyoshi’s model, which suggests that a zone of rapid leaching exists between the critical potential (E_c, equilibrium redox potential for the reduction of CuFeS₂ to Cu₂S) and the oxidation potential (E_ox, equilibrium redox potential for the oxidation of Cu₂S). The results of the leaching tests show that the leaching rate in hydrochloric acid solution is the fastest and that the relationship between the Cu leaching rate and oxidation–reduction potential (ORP) follows Hiroyoshi’s model. Thermodynamic calculations indicate that, with an increase in the chloride concentration, the concentration of cuprous ions increases as the chlorocuprate(I) complex ions are formed and the contribution of cuprous ions to the critical potential is greater than that of cupric ions, even though the concentration of cuprous ions is lower than that of cupric ions. This fact suggests that the formation of chlorocuprate(I) ions in a chloride solution may improve the chalcopyrite leaching rate by increasing the critical potential.     

Influence of wood species on the properties of biopolyurethane prepared from liquefied wood with residue

Biopolyurethane prepared from liquefied wood with the residue of the liquefied wood product was investigated in this article. Previous results indicated that the residue of the liquefaction product was composed mostly of compounds originated from lignin. The chemical structures of lignin in softwood and hardwood are different. The influence of soft‐ and hardwood species on the chemical structure and mechanical properties of biopolyurethane prepared from liquefied wood with residue was investigated by tensile testing and Fourier transform infrared spectroscopy. The experimental results showed that the liquefaction of softwood occurs within a shorter time than that of hardwood and the biopolyurethane prepared from softwood was harder than that prepared from hardwood, which suggests that the properties of the liquefaction product and biopolyurethane are influenced by the chemical structure of the lignin. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Hairpin-based state machine and conformational addressing: Design and experiment

In this paper, we propose a new architecture for a multi-state DNA machine whose conformation of repeated hairpin structures changes sequentially in response to input oligomers. As an application of the machine, we also propose molecular memory in which the machine is used as a memory unit. Addressing in the memory is realized through state transitions of the machine. We then describe a method for designing DNA sequences of the machine, which exhaustively checks conformational changes of the machine by dividing its secondary structure into hairpin units. The method is based on the minimum free energy of the structure, the structure transition paths, and the total frequency of optimal and suboptimal structures. DNA sequences designed by the method were tested in a chemical experiment in which a machine consisting of two hairpins was actually constructed. As a result, we verified that the multi-state DNA machine realized the expected changes in its secondary structure.     

Formalization and Analysis of Class Loading in Java

Since Java security relies on the type-safety of the JVM, many formal approaches have been taken in order to prove the soundness of the JVM. This paper presents a new formalization of the JVM and proves its soundness. It is the first model to employ dynamic linking and bytecode verification to analyze the loading constraint scheme of Java2. The key concept required for proving the soundness of the new model is augmented value typing, which is defined from ordinary value typing combined with the loading constraint scheme. In proving the soundness of the model, it is shown that there are some problems inside the current reference implementation of the JVM with respect to our model. We also analyze the findClass scheme, newly introduced in Java2. The same analysis also shows why applets cannot exploit the type-spoofing vulnerability reported by Saraswat, which led to the introduction of the loading constraint scheme.     

Release behavior of tritium from graphite heavily irradiated by neutrons

The release behavior of tritium formed in graphite has been investigated as a function of radiation damage by means of isochronal annealing of samples heavily irradiated by neutrons. The lithium impurities in graphite were estimated as the source of tritium formation. The main chemical form of released tritium was hydrogen accompanied by a small quantity of methane. No other hydrocarbons could be detected. Tritiated water was always measured, but the formation mechanism was experimentally confirmed as the secondary oxidation of released HT molecule. The release spectrum of tritium in isochronal annealing was shifted to a higher heating temperature with the increase of the neutron fluence received by the graphite crystal. A relationship was established between the amount of tritium released up to a certain temperature and the degree of graphitization of the sample.     

Lattice parameter determination of a strained area of an InAs layer on a GaAs substrate using CBED

All the six lattice parameters (a, b, c, alpha, beta and gamma) of a strained area of an InAs layer grown on a GaAs substrate were determined without any assumption of the crystal lattice symmetry from the higher-order Laue zone (HOLZ) lines appearing in one convergent-beam electron diffraction (CBED) pattern. The analysis was performed with three steps. Firstly, the parameters alpha and beta were determined from the deviations of the HOLZ lines from the mirror symmetry perpendicular to the [001] direction. Secondly, the parameter c was determined from the distance between the intersections of the HOLZ lines, which have the same h and k indices but different l indices. Finally, the parameters a, b and gamma were determined simultaneously from several distances between the intersections of the HOLZ lines. The lattice parameters determined for the strained area were a = 0.611(2) nm, b = 0.615(1) nm, c = 0.6119(7) nm, alpha = 89.5(1) degrees, beta = 89.0(2) degrees and gamma = 89.1(2) degrees. This result implies that the cubic lattice of InAs is elongated approximately in the [111] direction and the exact lattice symmetry is triclinic. The same analysis procedure was applied to another two specimen areas. It was found that the areas have orthorhombic distortions with lattice parameters a = 0.607(2) nm, b = 0.604(1) nm and c = 0.6085(7) nm for one area, and with a = 0.607(2) nm, b = 0.605(1) nm and c = 0.6065(7) nm for the other area. It is should be emphasized that the present analysis of lattice distortions is immediately applicable to the other semiconductors, such as Si, SiGe or GaAs layers, without assuming any crystal system.     

Real-time surface plasmon resonance imaging measurements for the multiplexed determination of protein adsorption/desorption kinetics and surface enzymatic reactions on peptide microarrays

The kinetics of protein adsorption/desorption onto peptide microarrays was studied using real-time surface plasmon resonance (SPR) imaging. S protein binding interactions were examined using an array composed of five different peptides: N terminal and C terminal immobilized wild-type S peptide (S1 and S2), an alternate binding sequence derived by phage display (LB2), an NVOC-protected S peptide, and a FLAG peptide control sequence (F). Kinetic measurements of the S protein-S1 peptide interaction were analyzed to determine a desorption rate constant (k(d)) of 1.1 (+/-0.08) x 10(-2) s(-1), an adsorption rate constant (k(a)) of 1.9 (+/-0.05) x 10(5) M(-1) s(-1), and an equilibrium adsorption constant (K(Ads)) of 1.7 (+/-0.08) x 10(7) M(-1). SPR imaging equilibrium measurements of S protein to S1 peptide were performed to independently confirm the kinetically determined value of K(Ads). Rate constants for the S2 and LB2 peptides on the array were measured as follows: 1.6 (+/-0.04) x 10(5) M(-1) s(-1) (k(a)) and 1.1 (+/-0.07) x 10(-2) s(-1) (k(d)) for S2, 1.2 (+/-0.05) x 10(5) M(-1) s(-1) (k(a)) and 1.1 (+/-0.03) x 10(-2) s(-1) (k(d)) for LB2. In addition to S protein adsorption/desorption, real-time SPR imaging of peptide arrays was applied to study the surface enzymatic activities of the protease factor Xa. Enzymatic cleavage of the substrate peptide (P1) was shown to follow first-order kinetics and proceed at a rate 10 times faster than that of the mutant peptide (P2), with cleavage velocities of 5.6 (+/-0.3) x 10(-4) s(-1) for P1 and 5.7 (+/-0.3) x 10(-5) s(-1) for P2.     

CONTINUOUS VACUUM DRYER FOR ENERGY SAVING

A continuous vacuum dryer for energy saving has been developed in order to produce dried foods without heat denaturation in the products. This drying method is suitable for heat sensitive I and highly viscous foods and can dry to 1 to 4% in moisture content with good quality at around 40°C in product temperature andin 5 -10 min a drying time. Feed material with high viscosity has to I have uniform distribution on the belt in the vacuum chamber to I keep a constant drying for which a special feed nozzle has been developed after considerabl~ testing. Heat transfer on the wet material in the dryer has occurred by both conduction and radiation because of the design so that the thermal efficiency in