Hydrolytic degradation of poly[(R)-3-hydroxybutyric acid] in the melt

Poly[(R)-3-hydroxybutyric acid] [R-P(3HB)] was hydrolyzed in high-temperature and high-pressure water at the temperature range of 180-300 °C and for a period of 360 min. The formation, racemization, and decomposition of 3-hydroxybutyric acids (3HBs) and molecular weight change of R-P(3HB) were investigated. The highest yield of (R)-3-hydroxybutyric acid (R-3HB), ca. 80%, was obtained at 200 °C in the hydrolytic degradation periods of 240-360 min. Too-high hydrolytic degradation temperature such as 300 °C induced the decomposition and racemization of formed 3HBs, resulting in decreased yield of R-3HB. The hydrolytic degradation of R-P(3HB) proceeds homogeneously and randomly via a bulk erosion mechanism. The molecular weight of R-P(3HB) decreased exponentially without formation of low-molecular-weight specific peaks originating from crystalline residues. The hydrolytic degradation rates in the melt estimated from M_n changes were lower for R-P(3HB) than for poly(l-lactide) (PLLA) in the temperature range of 180-220 °C. The activation energy for the hydrolytic degradation (ΔE_h) of R-P(3HB) in the melt (180-250 °C) was 30.0 kcal mol⁻¹, which is higher than 12.2 kcal mol⁻¹ for PLLA in the melt in the temperature range (180-250 °C). This study reveals that hydrolytic degradation of PHB in the melt is an effective and simple method to obtain (R)-3HB and to prepare R-P(3HB) having different molecular weights without containing the specific low-molecular-weight chains, because of the removal of the effect caused by crystalline residues.     

Anti‐windup synthesis for a model predictive control system

In this paper, an anti‐windup design problem for a model predictive control system is studied. The plant is assumed to be stable. First, we propose the structure of an output feedback model predictive controller with an anti‐windup compensator. Then we show a design method of the anti‐windup compensator that guarantees closed‐loop stability and improves the transient response. The design problem of the anti‐windup compensator is reduced to a linear matrix inequality (LMI) optimization problem. Further, it is shown that there always exists an anti‐windup compensator that ensures global asymptotic stability. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Pollution of montane soil with Cu, Zn, As, Sb, Pb, and nitrate in Kanto, Japan

Soil cores and rainwater were sampled under canopies of Cryptomeria japonica in four montane areas along an atmospheric depositional gradient in Kanto, Japan. Soil cores (30 cm in depth) were divided into 2-cm or 4-cm segments for analysis. Vertical distributions of elemental enrichment ratios in soils were calculated as follows: (X/Al)_i/(X/Al)_BG (where the numerator and denominator are concentration ratios of element-X and Al in the i- and bottom segments of soil cores, respectively). The upper 14-cm soil layer showed higher levels of Cu, Zn, As, Sb, and Pb than the lower (14-30 cm) soil layer. In the four areas, the average enrichment ratios in the upper 6-cm soil layer were as follows: Pb (4.93) ≥ Sb (4.06) ≥ As (3.04) > Zn (1.71) ≥ Cu (1.56). Exogenous elements (kg/ha) accumulated in the upper 14-cm soil layer were as follows: Zn (26.0) > Pb (12.4) > Cu (4.48) ≥ As (3.43) ≥ Sb (0.49). These rank orders were consistent with those of elements in anthropogenic aerosols and polluted (roadside) air, respectively, indicating that air pollutants probably caused enrichment of these elements in the soil surface layer. Approximately half of the total concentrations of As, Sb, and Pb in the upper 14-cm soil layer were derived from exogenous (anthropogenic) sources. Sb showed the highest enrichment factor in anthropogenic aerosols, and shows similar deposition behavior to NO₃⁻, which is a typical acidic air pollutant. There was a strong correlation between Sb and NO₃⁻ concentrations in rainfall (e.g., in the throughfall under C. japonica: [NO₃⁻] = 21.1 [dissolved Sb], r = 0.938, p < 0.0001, n = 182). Using this correlation, total (cumulative) inputs of NO₃⁻ were estimated from the accumulated amounts of exogenous Sb in soils, i.e., 16.7 t/ha at Mt. Kinsyo (most polluted), 8.6 t/ha at Mt. Tsukuba (moderately polluted), and 5.8 t/ha at the Taga mountain system (least polluted). There are no visible ecological effects of these accumulated elements in the Kanto region at present. However, the concentrations of some elements are within a harmful range, according to the Ecological Soil Screening Levels determined by the U.S. Environmental Protection Agency.     

Refinement of inverter model considering dead‐time for performance improvement in predictive instantaneous current control

Model predictive instantaneous‐current control (MPIC), which was proposed in our earlier works, enables us to achieve better instantaneous current control using mathematical models of an inverter and permanent magnet synchronous motors (PMSMs). However, dead‐time to avoid short breakdown in the inverter is not usually considered in a general inverter model. Such an unmodeled part in the inverter model prevents accurate prediction of current evolution in motor systems based on the model predictive control. Therefore, in this paper, we analyze current response resulting from the dead‐time in the MPIC, and propose a refined inverter model considering the dead‐time so that control performance is improved. The effectiveness of the proposed method is verified through simulation and experiments. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Use of a Metal-mould Process in the Development of Hemispherical Heavy-walled Castings

The exacting quality required of hemispherical heavy-walled steel castings, used in nuclear power applications, has been remarkably improved by the adoption of a newly developed metal-mould process. This technique is dependent on the use of a metal core. The optimum conditions for solidification were determined by the finite element analytical method. The appropriate wall-thickness of the chill elements was also investigated using data based on actual experience. The core was designed in such a manner that the surface carried a series of concave “dimples” in the manner of a golf-ball, the pattern being intended to prevent the formation of cracks, generated on the casting surface when in contact with a metal mould. Stresses caused by solidification shrinkage were reduced by splitting the core. In the event, the casting structure conformed well to the results of the solidification analysis. Radiographic examination revealed a high level of soundness, with no trace of internal defects. No anisotropy was detected in mechanical properties. It is shown that this process is being currently employed in the manufacture of actual products.     

Preparation of Cu-Ni Film Resistors with Low Resistivity and Low TCR

Thin film resistors with low TCR and low electric resistivity were prepared from phosphorus free Cu-Ni alloy obtained by electroless and electrolytic deposition with heat treatment at low temperature.     

Factors affecting soluble selenium removal by a selenate-reducing bacterium Bacillus sp. SF-1

High concentrations of soluble selenium, selenate and selenite, have acute and chronic toxicity toward living things. With the aim of developing a biological process for selenium removal, the effects of a variety of parameters on the reduction of soluble selenium by a Bacillus sp. strain SF-1, which is capable of reductively transforming selenate into selenite and, subsequently, into nontoxic insoluble elemental selenium, were studied. The bacterial strain could effectively reduce 20 mM of selenate to selenite and 2 mM of selenite to elemental selenium in the presence of an appropriate carbon source and in the absence of oxygen. The reduction rate of selenate to selenite was much higher than that of selenite to elemental selenium, resulting in the transient accumulation of selenite during selenate reduction. The selenate reduction rate increased with increases in the selenate concentration up to 20 mM, while the rate of selenite reduction decreased sharply at selenite concentrations of more than 2 mM. The elemental selenium transformed from selenate via selenite was found both inside and outside the cells. Bacillus sp. SF-1 was able to utilize a variety of organic acids or sugars as a carbon source in selenate reduction. Although the copresence of sulfate did not inhibit selenate reduction, it was completely inhibited by some other oxyanions, including nitrate. A model sequencing batch system using the bacterial strain was developed and exhibited good performance in the treatment of wastewater containing high concentrations of selenate.     

Programmed High‐Hole‐Mobility Supramolecular Polymers from Disk‐Shaped Molecules

In this paper a simple, casting solution technique for the preparation of two‐dimensional (2D) arrays of very‐high molecular weight (MW) 1D‐Pc supramolecular inorganic polymers is described. The soluble fluoroaluminium tetra‐tert‐butylphthalocyanine (ttbPcAlF) is synthesized and characterized, which can be self‐assembled to form 2D arrays of very‐high‐MW 1D‐Pc supramolecular inorganic polymers. High‐resolution transmission electron microscopy (HRTEM) demonstrates that the 1D‐ttbPcAlF, having a cofacial ring spacing of ～0.36 nm and an interchain distance of ～1.7 nm, self‐assembles into 2D‐nanosheets (～140 nm in length, ～20 nm in width, and equivalent to MW of 3.2 × 10⁵ g mol^?1). The film cast from a 1,2‐dichloroethane (DCE) solution shows a minimum hole‐mobility of ～0.3 cm² V^?1 s^?1 at room temperature by flash‐photolysis time‐resolved microwave conductivity (TRMC) measurements and a fairly high dark dc‐conductivity of ～1 × 10^?3 S cm^?1.     

Design of stabilized laser for optically pumped atomic frequency standards

The influence of a stabilized laser's fluctuations in an optically pumped atomic frequency standard is considered. It is important to use a laser with narrow linewidth and select the modulation frequency where the laser's free‐running frequency fluctuation at twice the modulation frequency is the lowest. Employing these considerations, the stabilized laser for our optically pumped cesium beam frequency standard is designed. © 2001 Scripta Technica, Electr Eng Jpn, 136(2): 31–37, 2001