Computer vision for interactive computer graphics

Vision can be a powerful interface device for computers because of its potential for sensing body position, head orientation, direction of gaze, pointing commands, and gestures. Such unencumbered interaction can make computers easier to use. We describe vision algorithms for interactive graphics and present vision-controlled graphics applications using these algorithms. Some applications employ an artificial retina chip for image detection or preprocessing     

Room temperature operation of GaInAs-GaInAsP-InP SCH multiquantum-film laser with narrow wire-like active region

GaInAs-GaInAsP-InP SCH (separate-confinement heterostructure) multiquantum-film lasers with approximately 100-nm-wide wirelike active regions were fabricated by two-step low-pressure organometallic vapor-phase epitaxy (LP-OMVPE) growth and wet chemical etching and operated at room temperature. An increase in the threshold current density in such lasers was drastically reduced by using a preheating process in hydrogen atmosphere and a thin InP cover layer growth prior to the regrowth of a GaInAsP optical confinement layer. The fabrication processes presented can be very effective for realization of room-temperature operation of long-wavelength quantum-wire and quantum-box lasers based on GaInAs-InP materials.<>     

Study of point defects in CuGaSe2 single crystals by means of electron paramagnetic resonance and photoluminescence

Point defects in CuGaSe₂ single crystals as vacancies V_Se, V_Cu and defect pair (2V_Cu⁻+Ga_Cu²⁺) have been studied by means of electron paramagnetic resonance (EPR) and low-temperature photoluminescence (PL). EPR hyperfine structure has been found at temperatures as low as 1.45–45 K and the temperature dependence of EPR line is discussed. Photo-EPR spectrum reveals optically active behavior of intrinsic point defects in CuGaSe₂ crystals. Three bands of PL emission show different origins and two low-energy bands at 1.55 and 1.58 eV have been found to be steady despite H₂-, O₂- and Se₂-annealings. The experimental data added with electric characterization in accordance with the used annealings and together with a defect physics model allow consideration of the point defect ensemble in CuGaSe₂ in more detail.     

Cytokine-induced neutrophil chemoattractant gene expression in the rat hypothalamus by osmotic stimulation

Cytokine-induced neutrophil chemoattractant (CINC) is one of the chemokines and has chemotaxity for neutrophils. Recently, we found the presence of stress-sensitive CINC expression in the hypothalamic nuclei such as the paraventricular nucleus. Since CINC was predominantly co-localized with vasopressin in the supraoptic nucleus (SON), we investigated the effect of hyperosmotic challenge on CINC mRNA in the hypothalamus. We found that CINC mRNA expression in the hypothalamus was augmented within 30 min following osmotic stimulation and immediately returned to the basal level. The suckling, which is a stimulation to oxytocin neurons in the SON, has no effect on CINC mRNA expression in the hypothalamus. This is the first evidence that the chemokine in the brain is activated by osmotic stimulation.     

Repeatable change in electrical resistance of Si surface by mechanical and electrical nanoprocessing

The properties of mechanically and electrically processed silicon surfaces were evaluated by atomic force microscopy (AFM). Silicon specimens were processed using an electrically conductive diamond tip with and without vibration. After the electrical processing, protuberances were generated and the electric current through the silicon surface decreased because of local anodic oxidation. Grooves were formed by mechanical processing without vibration, and the electric current increased. In contrast, mechanical processing with vibration caused the surface to protuberate and the electrical resistance increased similar to that observed for electrical processing. With sequential processing, the local oxide layer formed by electrical processing can be removed by mechanical processing using the same tip without vibration. Although the electrical resistance is decreased by the mechanical processing without vibration, additional electrical processing on the mechanically processed area further increases the electrical resistance of the surface.     

Efficient hydrogen production using a multi-layered photobioreactor and a photosynthetic bacterium mutant with reduced pigment

A multi-layered photobioreactor (MLPR), where the light paths were formed by the localization of bacterial cells, was constructed for efficient hydrogen production. The performance was investigated under several conditions in order to clarify the effect of this reactor on hydrogen production. An analysis of the hydrogen production profile showed that the MPLR utilizes both the light that directly illuminates its surface and the light induced and diffused from its light paths for hydrogen production. It was also found that the hydrogen productivity in the MLPR was more than twice that in a plate-type reactor. When a photosynthetic bacterium mutant with reduced pigment, MTP4, was used, the maximum hydrogen production rate reached 2.0 l/m² h, which was 38% higher than that of a conventional plate-type reactor. The synergistic effect of the improvement in the reactor and the modification of the bacteria was brought about by the combination of the MLPR and MTP4, and resulted in an improvement in the hydrogen production.     

Uniform culture in solid-state fermentation with fungi and its efficient enzyme production

Solid-state fermentation (SSF) has attracted a lot of interest for carrying out high-level protein production in filamentous fungi. However, it has problems such as the fermentation heat generated during the culture in addition to the reduced mobility of substances. These conditions lead to a nonuniform state in the culture substrate and result in low reproducibility. We constructed a non-airflow box (NAB) with a moisture permeable fluoropolymer membrane, thereby making it possible to control and maintain uniform and optimal conditions in the substrate. For the NAB culture in Aspergillus oryzae, temperature and water content on/in the whole substrate were more consistent than for a traditional tray box (TB) culture. Total weight after the culture remained constant and dry conditions could be achieved during the culture. These data demonstrate the possibility of growing a uniform culture of the whole substrate for SSF. The NAB is advantageous because it allows for the control of exact temperature and water content in the substrate during the culture by allowing vapor with latent heat to dissipate out of the box. In addition, several enzymes in the NAB culture exhibited higher production levels than in the TB culture. We believe that culturing in the constructed NAB could become a standard technique for commercial SSF.     

Steric hindrance by 2 amino acid residues determines the substrate specificity of isomaltase from Saccharomyces cerevisiae

The structures of the E277A isomaltase mutant from Saccharomyces cerevisiae in complex with isomaltose or maltose were determined at resolutions of 1.80 and 1.40 Å, respectively. The root mean square deviations between the corresponding main-chain atoms of free isomaltase and the E277Α-isomaltose complex structures and those of free isomaltase and the E277A-maltose complex structures were found to be 0.131 Å and 0.083 Å, respectively. Thus, the amino acid substitution and ligand binding do not affect the overall structure of isomaltase. In the E277A-isomaltose structure, the bound isomaltose was readily identified by electron densities in the active site pocket; however, the reducing end of maltose was not observed in the E277A-maltose structure. The superposition of maltose onto the E277A-maltose structure revealed that the reducing end of maltose cannot bind to the subsite + 1 due to the steric hindrance from Val216 and Gln279. The amino acid sequence comparisons with α-glucosidases showed that a bulky hydrophobic amino acid residue is conserved at the position of Val216 in α-1,6-glucosidic linkage hydrolyzing enzymes. Similarly, a bulky amino acid residue is conserved at the position of Gln279 in α-1,6-glucosidic linkage-only hydrolyzing α-glucosidases. Ala, Gly, or Asn residues were located at the position of α-1,4-glucosidic linkage hydrolyzing α-glucosidases. Two isomaltase mutant enzymes – V216T and Q279A – hydrolyzed maltose. Thus, the amino acid residues at these positions may be largely responsible for determining the substrate specificity of α-glucosidases.     

New classification of capsular block syndrome

PURPOSE: To propose a new classification of capsular block syndrome (CBS) to improve understanding of the etiology and provide effective treatment. SETTING: Shohzankai Medical Foundation, Miyake Eye Hospital, Nagoya, and Japanese Red Cross Society, Wakayama Medical Center, Wakayama, Japan. METHODS: Three groups of eyes with CBS were reviewed: eyes originally reported and diagnosed as having CBS; eyes experiencing CBS after hydrodissection and luxation of the lens nucleus; and eyes with CBS accompanying liquefied aftercataract or capsulorhexis-related lacteocrumenasia. RESULTS: In all 3 groups, the CBS occurred in eyes with a continuous curvilinear capsulorhexis (CCC). It was characterized by accumulation of a liquefied substance within a closed chamber inside the capsular bag, formed because the lens nucleus or the posterior chamber intraocular lens (IOL) optic occluded the anterior capsular opening created by the CCC. Depending on the time of onset, CBS can be classified as intraoperative (CBS seen at the time of lens luxation following hydrodissection), early postoperative (original CBS), and late postoperative (CBS with liquefied aftercataract or lacteocrumenasia). The etiology of the accumulated substance and the method of treatment are different in each type. CONCLUSION: Capsular block syndrome is a complication of cataract/IOL surgery that can occur during and after surgery. Correctly identifying the type of CBS is crucial to understanding the nature and effective treatment of this disorder.     

Reduction of Ripple Current Loss by Electromagnetic Coupling of Air‐Core Reactors

To reduce the loss due to ripple current in a multiphase current‐reversible chopper, we investigated electromagnetic coupling of an air‐core reactor. We derived the relationship between the amplitude of the ripple current, the duty factor, and the electromagnetic coupling coefficient, and used the results to estimate the effects of electromagnetic coupling in the design of a train energy storage system. We built reactors with electromagnetic coupling coefficients of 0.93 and 0.60. These reactors employed a new winding structure that provides an optimal electromagnetic coupling coefficient. The mass of the former type of reactor was increased by 4.4% over the conventional design, and that of the latter type of reactor was decreased by 17%. Finally, we tested the new reactors. When the chopper employs the former type of reactor and operates with equal‐phase switching and cumulative coupling, the loss due to ripple current is decreased by 11%. When the chopper employs the latter type of reactor and operates with shift‐phase switching and differential coupling, the loss is decreased to 31%. The test showed that the calculated relationships agreed with the measured values.