Novel reworkable resins: thermo‐ and photo‐curable di(meth)acrylates

The aim of the study reported in this paper was to develop new di(meth)acrylates having aromatic units and thermally degradable units in their molecules. It was also the aim to clarify the photo‐curing and degradation properties of the new monomers. Di(meth)acrylates having aromatic units and thermally degradable units were synthesized. As thermally cleavable linkages, tertiary ester moieties were incorporated into the di(meth)acrylates. Three types of processes for curing and degradation of the cured resins were studied: thermal curing and thermal degradation; thermal curing and photodegradation; and photo‐curing and thermal degradation. In the thermal curing and photodegradation process, di(meth)acrylate films containing a thermally induced radical initiator and a photoacid generator (PAG) became insoluble in solvents on heating. The cured films became soluble in solvents after ultraviolet irradiation followed by baking. The re‐dissolution behaviors were strongly affected by the structures of the PAGs. A mechanism for the photo‐ or thermo‐curing and photoassisted thermal degradation was studied using Fourier transform infrared, ¹H NMR, thermogravimetric, mass spectrometric and size exclusion chromatographic analyses. Copyright © 2009 Society of Chemical Industry     

Fabrication and basic characterization of silicon nitride ceramics as an inert matrix

Silicon nitride ceramics containing cerium as a simulating element of americium were fabricated to clarify proper sintering conditions. Basic properties of sintered specimens were evaluated for utilization to an inert matrix. Commercial powders of silicon nitride and cerium dioxide (16 or 24.6 wt%), and a powder of aluminum oxide or zirconium oxide as a sintering additive (5 wt%) for some specimens were mixed by ball milling in ethanol. Small amounts of stearic acid as a lubricant were also added. The mixed powder was uniaxially pressed into cylindrical pellets. Then, the pellets were embedded in a packing powder composed of 50 wt%-Si₃N₄ and 50 wt%-BN, and sintered at 2023 or 2073 K for 2 h in a 0.1 MPa N₂ atmosphere. Most of the sintered specimens had high densities (>95% TD). Sintered bodies consisted of columnar silicon nitride grains and grain-boundary phase. XRD analysis clarified that the grain-boundary phase contained crystalline compounds of cerium. The thermal conductivities of sintered specimens except for specimens containing aluminum oxide were about 40 W/m K at room temperature.     

Characterization of membrane bioreactor for dry wine production

Characteristics of yeast growth and ethanol fermentation were examined in membrane bioreactor using a grape juice. After inoculation, batch fermentation was carried out for 24 h. When yeast growth reached the stationary phase, continuous fermentation was initiated. In continuous fermentation, a linear relationship was observed between cell concentration and dilution rate. In single-vessel membrane bioreactor, the cell concentrations of 18.7 g/l and 76.9 g/l (15 and 60 times higher than that of the batch fermentation, respectively) were observed at dilution rates of 0.1 h(-1) and 0.3 h(-1), respectively. The residual sugar concentration was higher than 10 g/l at the dilution rate of 0.1 h(-1), 0.2 h(-1) or 0.3 h(-1), therefore the single-vessel membrane bioreactor was not suitable for producing dry wine (sugar concentration: 4 g/l or less). In the double-vessel membrane bioreactor, it is most suitable to set the recycle ratio at 0.15 for keeping the sugar concentration below 4 g/l. The productivity of dry wine in the double-vessel membrane bioreactor was 28 times higher than that in the batch fermentation.     

Capacitive level meter for liquid hydrogen

A capacitive level meter working at low temperatures was made to use in magnetic refrigerator for hydrogen liquefaction. The liquid level was measured from the capacitance between parallel electrodes immersed in the liquid. The meter was tested for liquid nitrogen, hydrogen, and helium. The operation was successful using an AC capacitance bridge. The estimated sensitivity of the meter is better than 0.2 mm for liquid hydrogen. The meter also worked with pressurized hydrogen.     

Evaluation of autotrophic growth of ammonia-oxidizers associated with granular activated carbon used for drinking water purification by DNA-stable isotope probing

Nitrification is an important biological function of granular activated carbon (GAC) used in advanced drinking water purification processes. Newly discovered ammonia-oxidizing archaea (AOA) have challenged the traditional understanding of ammonia oxidation, which considered ammonia-oxidizing bacteria (AOB) as the sole ammonia-oxidizers. Previous studies demonstrated the predominance of AOA on GAC, but the contributions of AOA and AOB to ammonia oxidation remain unclear. In the present study, DNA-stable isotope probing (DNA-SIP) was used to investigate the autotrophic growth of AOA and AOB associated with GAC at two different ammonium concentrations (0.14 mg N/L and 1.4 mg N/L). GAC samples collected from three full-scale drinking water purification plants in Tokyo, Japan, had different abundance of AOA and AOB. These samples were fed continuously with ammonium and ¹³C-bicarbonate for 14 days. The DNA-SIP analysis demonstrated that only AOA assimilated ¹³C-bicarbonate at low ammonium concentration, whereas AOA and AOB exhibited autotrophic growth at high ammonium concentration. This indicates that a lower ammonium concentration is preferable for AOA growth. Since AOA could not grow without ammonium, their autotrophic growth was coupled with ammonia oxidation. Overall, our results point towards an important role of AOA in nitrification in GAC filters treating low concentration of ammonium.     

Dependence of ion beam current on position of mobile plate tuner in multi-frequencies microwaves electron cyclotron resonance ion source

We are constructing a tandem-type electron cyclotron resonance ion source (ECRIS). The first stage of this can supply 2.45 GHz and 11-13 GHz microwaves to plasma chamber individually and simultaneously. We optimize the beam current I(FC) by the mobile plate tuner. The I(FC) is affected by the position of the mobile plate tuner in the chamber as like a circular cavity resonator. We aim to clarify the relation between the I(FC) and the ion saturation current in the ECRIS against the position of the mobile plate tuner. We obtained the result that the variation of the plasma density contributes largely to the variation of the I(FC) when we change the position of the mobile plate tuner.     

Synthesis of Blue-Emitting CaMgSi2O6:Eu2+ Phosphor Using an Electrostatic Self-Assembly Deposition Method

Eu²⁺-doped CaMgSi₂O₆ phosphor was prepared by depositing mixed hydroxides of Ca, Mg, and Eu over spherical SiO₂ particles (300 nm) pre-coated with polycations (polyethyleneimine), followed by calcination at 1200°C in a reducing atmosphere. The prepared phosphor showed intense blue emission, ascribable to the 4f⁷-4f⁶5d transition of Eu²⁺. In contrast, the luminescence intensity of the phosphor was considerably decreased when prepared without polycations. It was suggested that negatively charged hydroxides are deposited on positively charged SiO₂ surfaces pre-coated with polycations through electrostatic self-assembly interaction. On calcination, the hydroxide shells react with the SiO₂ cores to produce Eu²⁺:CaMgSi₂O₆.     

Two-Dimensional Eddy Current Signal Enhancement via Multifrequency Data Fusion

Eddy current testing is one of the most popular nondestructive testing methods; a multifrequency testing is often applied to cancel the unwanted signals to improve the signal-to-noise ratio. This is usually accomplished by combining the results obtained at different frequencies in the spatial domain. In this paper a fusion strategy to integrate two-dimensional, multifrequency signals is introduced, which is based on the multiresolution analysis method. A signal-to-noise ratio criteria is adopted to evaluate the fusion results. Finally, the effectiveness of the pyramid method is discussed.     

Hydrogen production by co-cultures of Lactobacillus and a photosynthetic bacterium, Rhodobacter sphaeroides RV

Hydrogen production with glucose by using co-immobilized cultures of a lactic acid bacterium, Lactobacillus delbrueckii NBRC13953, and a photosynthetic bacterium, Rhodobacter sphaeroides RV, in agar gels was studied. Glucose was converted to hydrogen gas in a yield of 7.1 mol of hydrogen per mole of glucose at a maximum under illuminated conditions.