Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Analysis of Plasmalogen Species in Foodstuffs

Ethanolamine plasmalogen (PlsEtn), which is present at high levels in brains, is believed to be involved in neuronal protection. The present study was performed to search for PlsEtn resources in foodstuffs. The foodstuffs examined showed a wide range of PlsEtn contents from 5 to 549 μmol/100 g wet wt. The marine invertebrates, blue mussel, and ascidian had high PlsEtn contents (over 200 μmol/100 g wet wt). Profiling of the molecular species showed that the predominant fatty acids of PlsEtn species were 20:5 (EPA) and 22:6 (DHA) at the sn‐2 position of the glycerol moiety in marine foodstuffs, whereas major PlsEtn species in land foodstuffs were 20:4. Following quantitative analysis by multiple reaction monitoring, the ascidian viscera were shown to contain the highest levels of 18:0/20:5‐PlsEtn and 18:0/22:6‐PlsEtn (86 and 68 μmol/100 g wet wt, respectively). In order to evaluate a neuronal antiapoptotic effect of these PlsEtn species, human neuroblastoma SH‐SY5Y cells were treated with ethanolamine glycerophospholipid (EtnGpl), purified from the ascidian viscera, under serum starvation conditions. Extrinsic EtnGpl from ascidian viscera showed stronger suppression of cell death induced by serum starvation than with bovine brain EtnGpl. The EtnGpl from ascidian viscera strongly suppressed the activation of caspase 3. These results suggest that PlsEtn, especially that containing EPA and DHA, from marine foodstuffs is potentially useful for a therapeutic dietary supplement preventing neurodegenerative diseases, such as Alzheimer's disease (AD).     

Steam Reforming of Methanol on Copper Catalysts Supported on Large-Surface-Area ZnAl2O3

Steam reforming of methanol on various supported Cu catalysts was examined. Supports strongly affected catalyst activity and, among the catalysts tested, Cu catalyst supported on large-surface-area ZnAl₂O₄ showed the highest activity, which, to the best of our knowledge, was higher than those for the supported catalysts reported so far. For supported Cu catalysts, two species were observed. One was a dispersed Cu species having strong interaction between Cu and support, and the other was an isolated Cu species. The activity of the former species strongly depended on supports.     

Profiling and Imaging of Phospholipids in Brains of Abcd1‐Deficient Mice

ABCD1 is a gene responsible for X‐linked adrenoleukodystrophy (X‐ALD), and is critical for the transport of very long‐chain fatty acids (VLCFA) into peroxisomes and subsequent β‐oxidation. VLCFA‐containing lipids accumulate in X‐ALD patients, although the effect of ABCD1‐deficiency on each lipid species in the central nervous system has not been fully characterized. In this study, each phospholipid and lysophospholipid species in Abcd1‐deficient mice brains were profiled by liquid chromatography‐mass spectrometry. Among the phospholipid and lysophospholipid species that are significantly more enriched in Abcd1‐deficient mice brains, VLCFA were present in 75, 15, 5, 4, and 1 species of phosphatidylcholine, phosphatidylethanolamine, sphingomyelin, lysophosphatidylcholine, and lysophosphatidylethanolamine, respectively. Most VLCFA were incorporated at the sn‐1 position of phosphatidylcholine and phosphatidylethanolamine. Among the phospholipid species that are significantly less enriched in Abcd1‐deficient mice brains, odd‐numbered saturated or mono‐unsaturated fatty acyl moieties are contained in all phosphatidylcholine species. In addition, a number of phosphatidylglycerol, phosphatidylinositol, and phosphatidylserine species contained highly unsaturated fatty acyl moieties. Intriguingly, 44:1 phosphatidylcholine with VLCFA was mainly distributed in the gray matter, such as the cortex, but not in the white matter in the cerebrum and cerebellum. These results show that ABCD1‐deficiency causes metabolic alternation of long‐chain fatty acids and VLCFA. Moreover, our results imply a molecular mechanism for the incorporation of saturated or monounsaturated VLCFA into the sn‐1 position of phospholipids, and also indicate that the distribution of phospholipids with VLCFA may correlate with the development of X‐ALD.     

A photocatalytic membrane reactor for gas-phase reactions using porous titanium oxide membranes

Photocatalytic membrane reactors using porous titanium oxide membranes having pore sizes of several nanometers were utilized for a gas-phase reaction of methanol. Air mixed with methanol (MeOH) vapor, the concentration of which was controlled in the range of 500–6000 ppm, was fed to the photocatalytic membrane reactor in the range of 50–500 cm³/min using several types of flow patterns. Photocatalysis with membrane permeation resulted in a large decomposition rate, compared to photocatalysis without membrane permeation. The characteristics of the reaction such as decomposition ratio of MeOH, the conversion of the decomposed MeOH to CO₂ and H₂O were found to be a function of the residence time in the reactor. The photocatalytic reaction was analyzed based on pseudo-first-order kinetics to ascertain its simplicity, and the fitted curves were found to be in a relatively good agreement with the experimental data. Apparent rate constants with and without membrane permeation were 2.5 and 1.5×10⁻⁶ m s⁻¹, respectively, indicating that the performance of the photocatalytic reaction system with membrane permeation was enhanced.     

Push-Pull Fatigue of Sintered Silicon Nitride Ceramics at Elevated Temperatures

The fatigue tests under push-pull completely reversed loading and pulsating loading were performed for silicon nitride ceramics at elevated temperatures. Then the effects of stress wave form, stress rate, and cyclic understressing on fatigue strength, and cyclic straining behavior, were examined. The cycle-number-based fatigue life is found to be shorter under trapezoidal stress wave loading than under triangular stress wave loading, and to become shorter with increasing hold time under the trapezoidal stress wave loading. Meanwhile, the equivalent time-based life curve, which is estimated from the concept of slow crack growth, almost agrees with the static fatigue life curve in the short and intermediate life regions, showing the small cyclic stress effect and the dominant stress-imposing period effect on cyclic fatigue life. The fatigue strength increased in stepwise stress amplitude increasing test, where stress amplitude is increased stepwise every given number of stress cycles, at 1100° and 1200°C. Occurrence of cyclic strengthening was proved through a gradual decrease in strain amplitude during a pulsating loading test at 1200°C in this material, corresponding to the above cyclic understressing effect on fatigue strength.     

Influence of electrolytes on the photovoltaic performance of organic dye-sensitized nanocrystalline TiO2 solar cells

We have studied the influence of electrolytes on the photovoltaic performance of mercurochrome-sensitized nanocrystalline TiO₂ solar cells using LiI, LiBr, and tetraalkylammonium iodides as the electrolyte. Short-circuit photocurrent density (J_sc) and open-circuit photovoltage (V_oc) depended strongly on the electrolyte. J_sc of 3.42 mA cm⁻² and V_oc of 0.52 V were obtained for the LiI electrolyte and J_sc of 2.10 mA cm⁻² and V_oc of 0.86 V were obtained for the Pr₄NI electrolyte. This difference in photovoltaic performance was due to the change in the conduction band level of the TiO₂ electrode. Large V_oc of 0.99 V was obtained for the LiBr electrolyte due to the large energy gap between the conduction band level of TiO₂ and the Br/Br₂ redox potential. Solar cell performance also depended strongly on organic solvent, suggesting that the physical properties of solvents such as Li ion conductivity and donor number affect photovoltaic performance.     

Preparation of Ba2YCu3O7-δ Thin Films with Preferred Orientation through an Organometallic Route

Superconducting Ba₂YCu₃O_7-δ thin films were prepared through an organometallic route. Single-phase Ba₂YCu₃O_7-δ thin films with preferred orientation were successfully prepared on SrTiO₃ (100) single-crystal substrates at 800°C by a dip coating method using partially hydrolyzed Ba-Y-Cu organometallic solutions. Preferentially oriented Ba₂YCu₃-O_7-δ thin films were also prepared on MgO (100) substrates. By controlling the partial hydrolysis conditions, a coating solution for precursor thin films was kept accurately at the stoichiometric composition. The use of ozone gas during the pyrolysis of the precursor thin films was found to suppress the formation of BaCO₃. Ba₂YCu₃O_7-δ thin films with c -axis orientation perpendicular to a SrTiO₃ (100) substrate, which were heat-treated at 900°C for 15 min, exhibited a superconductivity transition with an onset of 90 K and an end of 75 K.     

日本蓄冷(热)空调系统的发展与最新业绩

介绍了日本减缓温室效应的对策、能源与电力行业现状、蓄冷(热)技术的发展与现状及其应用实例.在区域供热制冷工程中的实际应用数据表明,蓄冷(热)技术无论从减缓温室效应还是经济性角度来说都值得推广.     

Polyacene capacitors

We fabricated two types of polyacene capacitor with extremely stable polyacenic semiconductor (PAS) as the positive and negative electrodes. The first one is a coin-type PAS capacitor (six different sizes), which possesses large capacity with high reliability. Its capacity is much larger than that of the conventional electric double-layer capacitor which uses activated carbon as electrode. PAS capacitor can maintain more than 70% of the initial capacity even after 100 000 cycles. Moreover, this capacitor can be charged and discharged in a few minutes as well as at low rate. The second one is a cylinder-type PAS capacitor (diameter: 18 mm, height: 65 mm) which shows high capacity of 100 F and can discharge at the extremely high rate of 80 C. The coin-type PAS capacitor is currently used for memory back-up of electrical and communication equipment, and the cylinder-type is considered to be useful as power back-up for starting drive parts of electric equipment which needs high power density.