Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

Effects of dietary lipids on daunomycin-induced nephropathy in mice: comparison between cod liver oil and soybean oil

Although it is well known that dietary lipids affect the course of glomerulonephritis in rats and humans, the precise mechanisms involved have not been fully elucidated. The aim of this study was to investigate the effects of different types of dietary lipids (fish oil and vegetable oil) on daunomycin (DM)-induced nephropathy in mice fed on soybean oil (SO) or cod liver oil (CLO). Urinary protein excretion, serum albumin, creatinine, total cholesterol, and TG were measured, and glomerular histological changes were evaluated. Antioxidant enzymes were also measured, along with the levels of lipid peroxide, GSH, thromboxane (Tx) B_2′ and 6-keto prostaglandin F_1α in renal cortical tissue. Dietary CLO significantly reduced urinary albumin excretion and ameliorated the histological changes induced by DM. The increase of tissue lipid peroxide levels seen in SO-fed mice was suppressed in CLO-fed mice, whereas CLO-fed mice showed higher GSH levels than SO-fed mice throughout the experiment. In addition, renal tissue GSH peroxidase activity was significantly higher at 72 h after DM injection in CLO-DM mice than in SO-DM mice. Both renal cortical TxB₂ and 6-keto PGF_1α levels were significantly lower in CLO-DM mice than in SO-DM mice. These results suggest that inhibition of oxidative damage by dietary CLO played an important role in the prevention of DM nephropathy in this mouse model. The effect of CLO was closely associated with the inhibition of Tx synthesis.     

Evaluation of the historical records of lead pollution in the annual growth rings and bark pockets of a 250-year-old Quercus crispula in Nikko,Japan

The annual growth rings and bark pockets of a 250-year-old Japanese oak (Quercus crispula), collected from the Nikko National Park, Japan in 2000 AD, were analysed by ICP mass spectrometry. The annual rings, sampled in 5-year increments, recorded Pb concentrations from 0.01 to 0.1 mg kg(-1) and there was no significant change in concentration with time. In contrast, bark pocket samples dating from 1875 to the present showed a progressive increase in Pb concentration with time, from approximately 0.1 to 10 mg kg(-1). Shoots of epiphytic moss growing on the tree trunk contained 17 mg kg(-1) Pb. The bark pockets recorded historical increases in airborne Pb pollution accompanying the industrialisation of Japan, which was initiated by the opening of Japan's borders from 1854. This increase was not reflected by the annual rings. The 206Pb/207Pb isotope ratio of the bark pockets decreased from approximately 1.18 to 1.16 from 1964 to the present, indicating changes in the sources of Pb pollution. The 206Pb/207Pb isotope ratio of the moss shoots was similar to the current bark (1.16). The data showed bark pockets to be more effective than annual rings for recording historical change in airborne lead pollution.     

Anode‐voltage‐control circuit for compensation of luminance deterioration

Abstract— An external driving circuit that has realized long lifetime, power‐consumption control, and peak luminance for organic light‐emitting diode (OLED) displays have been developed. This circuit realizes an effective method for constant‐anode‐voltage (CV) driving refered to as clamped inverter (CI) driving. The feature of CV driving is to achieve low‐power consumption compared with constant‐anode‐current (CC) driving and to control the power consumption and peak luminance according to the image because display luminance can be easily changed by controlling the anode voltage. On the other hand, CV driving has the problem that luminance deterioration appears to be serious compared with that of CC driving because the current of the OLED element decreases according to usage time. To cope with this, a lifetime compensation circuit that has increased the anode voltage so that it compensates for the luminance deterioration has been developed. This circuit can compensate not only the decrease in current but also the decrease in luminance at a constant current that CC driving cannot. However, increasing the anode voltage causes an increase in stress on the OLED element. The influence of stress on OLED lifetime was verified. As a result, it was confirmed that this circuit can extend the lifetime by 32% even if the anode voltage is increased, causing stress on the OLED structure.     

Pilot-Scale Operation of a Concrete Sludge Recycling Plant and Simultaneous Production of Calcium Carbonate

A pilot-scale plant to treat concrete sludge and produce calcium carbonate (CaCO₃) and an environmental purification agent (phosphorus adsorbent derived from concrete sludge, PAdeCS®) was designed, constructed, and operated. Concrete sludge from a concrete pile and pole production plant, boiler gas containing CO₂, and groundwater were used in the plant. The process involved calcium extraction from concrete sludge into water, followed by reaction of the calcium with CO₂ to produce crystalline CaCO₃. The pilot-scale plant was operated for 1 week, and the mass flows, conversion of CO₂ to CaCO₃, and net CO₂ emissions of the process were estimated. High-purity CaCO₃ (>97%) suitable for industrial use was obtained. Based on the power consumption of the process and the amount of CO₂ sequestered into CaCO₃, a net reduction in CO₂ emissions can be achieved using this process. The produced PAdeCS can be used as an inexpensive substitute for calcium series environmental purification agents.     

Improved efficiency of polymer light-emitting diodes by inserting a hole transport layer formed without thermal treatment above glass transition temperature

We have demonstrated a significant improvement in the performance of polymer light-emitting diodes (PLEDs) by inserting the fluorene-triatylamine copolymer as hole transport layer (HTL) without a thermal treatment above the glass transition temperature (T_g). A thin HTL insolubilized by a thermal treatment above T_g is often inserted as an interlayer between an anode buffer layer and a light-emitting polymer (LEP) in PLEDs fabricated by using a conventional solution process. The evaporative spray deposition using ultradiluted solution (ESDUS) method has enabled fabricating polymer bilayer structure without an insolublizing procedure. The bilayer PLEDs fabricated by ESDUS without the thermal treatment showed significantly higher and more stable external quantum efficiency than PLEDs having the conventional interlayer. Thermal treatment above T_g of the copolymer would induce degradation of its hole injection property. Furthermore, ESDUS bilayer devices showed much higher power efficiency than interlayer devices when calcium was used for cathode. The improvements would be caused by the enhancement of hole injection and the effective electron blocking at the copolymer/LEP interface in the ESDUS bilayer devices.     

Lipid analog with 2-nitrophenol trigger designed for liposome fusion at physiological pH

A novel lipid analog with two long alkyl (C₁₆) chains, an aspartate skeleton, a connecting alkyl (C₈) chain, and 2-nitrophenol trigger group is synthesized by an efficient synthetic route, which can induce liposome fusion at physiological pH.     

A programmable editor for developing structured documents based on bidirectional transformations

This paper presents an application of bidirectional transformation to the design and implementation of a novel editor supporting interactive refinement in the development of structured documents. The user performs a sequence of editing operations on a view of the document, and the editor automatically derives an efficient and reliable document source and a transformation that produces the document view. The editor is unique in its programmability, in the sense that transformations can be obtained through editing operations. It uses the view-updating technique developed in the database community and a new bidirectional transformation language that can describe not only the relationship between the document source and its view, but also the data dependency in the view.     

Detection of Verotoxigenic Escherichia coli O157 and O26 in food by plating methods and LAMP method: a collaborative study

In order to establish a rapid and sensitive method for the detection of Verotoxigenic Escherichia coli O157 and O26, a collaborative study was conducted focusing on a comparison of the efficiency of loop-mediated amplification (LAMP) assay targeting the Verocytotoxin (also called Shiga toxin) gene, utilizing a direct plating method and a plating method with immunomagnetic separation (IMS-plating method) using various agar media. In combination with enrichment with the modified EC supplemented with novobiocin, E. coli O157 was detected in most samples of ground beef and alfalfa sprouts by LAMP assay, the direct plating method and the IMS-plating method. E. coli O26 was detected in approximately 100% of the food samples by LAMP assay. However, the IMS-plating and direct plating methods recovered 80 and 50% in ground beef samples, respectively. As a result, it was demonstrated the LAMP assay is superior to the IMS-plating method. Based on these results, it appears LAMP assay is effective as a screening assay to detect E. coli O157 and O26 from positive samples.     

Effect of sweep gas species on tritium release behavior from lithium titanate packed bed during 14 MeV neutron irradiation

In a fusion reactor, the prediction of tritium release behavior from breeder blanket is important to design the tritium recovery system, but the amount of tritium generated is necessary information to do that. Hence, tritium generation and recovery studies on lithium ceramics packed bed have been started by using fusion neutron source (FNS) in Japan Atomic Energy Agency (JAEA). Lithium titanate (Li₂TiO₃) was selected as tritium breeding material, and its packed bed was enclosed by the beryllium blocks, and was kept at certain temperature during fusion neutron irradiation. During irradiation, the packed bed was purged with the sweep gas continuously, and tritium released was trapped in each gas absorber selectively by chemical form. In this work, the effect of sweep gas species on tritium release behavior was investigated. In the case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in the case of sweep by helium without water vapor, tritium in gaseous form was released first, and release of tritium in water form was delayed from gaseous tritium and was gradually increased.