High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks

We have developed a high-speed confocal laser microscope. A microlens-array disk set in front of a pinhole-array disk improved optical efficiency more than ten times compared with that of conventional Nipkow confocal microscopy. This new microscope achieves a high-speed measurement of 1 frame/ms. We expect that it will be used for measuring biological and industrial active samples.     

Characteristics of high-energy neutrons estimated using the radioactive spallation products of Au at the 500-MeV neutron irradiation facility of KENS

We carried out a shielding experiment of high-energy neutrons, generated from a tungsten target bombarded with primary 500-MeV protons at KENS, which penetrated through a concrete shield in the zero-degree direction. We propose a new method to evaluate the spectra of high-energy neutrons ranging from 8 to 500 MeV. Au foils were set in a concrete shield, and the reaction rates for 13 radionuclides produced by the spallation reactions on the Au targets were measured by radiochemical techniques. The experimental results were compared with those obtained by the MARS14 Monte-Carlo code. A good agreement (between them) was found for energies beyond 100 MeV. The profile of the neutron spectrum, ranging from 8 to 500 MeV, does not depend on the thickness of the concrete shield.     

One-time password-based high performance per-packet authentication for capsule networks

Most traditional security for capsule-type active networks focused on node-level security mechanism that tries to restrict resource consumption of a packet at a node. Network level security mechanism, which restricts resource consumption in the whole network like ttl in ipv4, is also necessary for capsule. We propose high-performance per-packet authentication mechanism for this purpose. The proposed authentication mechanism uses packet-loss-resistant one-time password algorithm to avoid multiple packet exchanges between user terminals and routers. Since the address in a node where a packet’s authentication data is stored can be easily calculated from the information contained in the packet, we can authenticate the packet without searching a database. The overhead in the packet for authentication information is 46 bytes, and a Linuxpc with a 2.8 GHz Intel Pentium 4 processor can authenticate and process a packet in 22 µs, which corresponds to 45,000 authentications per second.     

A conceptual design of light ion beam fusion reactor—UTLIF(1)

UTLIF(1) is a conceptual design study on a light ion beam driven fusion reactor based on a concept of pin-bundle blanket. The study includes nuclear and structural analyses of the blanket, consideration on materials, tritium handling system and power conversion system designs, pellet and beam driver designs, and economic analysis of the plant. The pin-bundle blanket has been shown to be attractive for light ion beam fusion reactors. Some subjects to be developed have been pointed out from reactor engineering aspects.     

A case of mesenteric venous thrombosis after endoscopic variceal band ligation

A rare case of isolated superior mesenteric venous thrombosis (MVT) after endoscopic variceal band ligation (EVL) is reported. A 64-year-old woman with a history of idiopathic portal hypertension presented at the emergency room with vomiting, increasing cramping abdominal pain, and low-grade fever. She had undergone EVL for esophageal varices 4 months before and had had intermittent attacks of mild abdominal pain after the EVL. Ultrasonogram of the abdomen demonstrated marked concentric wall thickening of the ileal loop. Enhanced computed tomographic (CT) scan revealed a central lucency in the lumen of the superior mesenteric vein, surrounded by a high-density vein wall, corresponding to a thrombus. An isolated MVT and venous collateral network in the splanchnic area were confirmed by angiography. Supportive therapy, i.e., water and electrolyte replacement, and anticoagulation improved the clinical condition and radiologic status. This case of MVT after EVL suggests a possible relationship between EVL and MVT. It is necessary for clinicians to be aware of this relationship for the early diagnosis of MVT.     

Prediction of Concerted Sediment Flushing

A proprietary one-dimensional numerical model was developed for predicting the amounts of sediment flushed and deposited in the reservoirs in series, the bed evolutions, and variations of the suspended solids concentrations along a river during the concerted sediment flushing events. The model consists of a flow movement module and sediment transport module in which the bed material load is taken as sediment mixture. The nonuniform property of the bed material load is modeled by the introduction of a mixing layer, transition layer, and deposition strata. The model was calibrated on the basis of the field data at Dashidaira and Unazuki reservoirs on the Kurobe River in Japan. The calculated results are in good agreement with the measurements. For the reservoirs out of Japan, the Ashida and Michiue bed load formula used in the model should be verified or replaced by other formulas.     

Block FEM for Time-Dependent Shear-Lag Behavior in Two I-Girder Composite Bridges

This paper presents a time-dependent finite-element analysis of a two I-girder composite bridge with a concrete slab. The creep and shrinkage of the concrete slab are considered as sources of time-dependent behavior. This analysis, unlike others, includes the shear-lag effect of the concrete slab on the time-dependent behavior of two I-girder bridges. An example calculation is given for a two-span continuous composite bridge with a cracking region in the concrete deck near the interior support. It is shown that the shear-lag effect becomes significant at the edge of the cracking region and at the bridge ends.     

Effect of pore size of self-organized honeycomb-patterned polymer films on spreading, focal adhesion, proliferation, and function of endothelial cells

The design of nano- and microstructures based on self-organization is a key area of research in the search for new materials, and it has a variety of potential applications in tissue engineering scaffolds. We have reported a honeycomb-patterned polymer film (honeycomb film) with highly regular pores that is formed by self-organization. This study describes the behavior of vascular endothelial cells (ECs) on honeycomb films with four different pore sizes (5, 9, 12, and 16 microm) as well as on a flat film. We examined the influence of the honeycomb pattern and pore size on cell behavior. The changes in cell morphologies, actin filaments, vinculin clusters, cell proliferation, and secreted extracellular matrix (ECM) (fibronectin, laminin, type IV collagen, and elastin) production profiles were observed by using optical, fluorescence, and scanning electron microscopy. The ECs that adhered to the flat film showed an elongated morphology with random orientation; the actin filaments and focal adhesions were not conspicuous. On the other hand, the ECs on the honeycomb films exhibited greater spreading and flattening; the degree of spreading of the ECs increased with an increase in the pore size. The actin filaments and focal adhesions appeared conspicuous, and the focal adhesions localized along the edge of the honeycomb pores were distributed over the entire projected cell area. The honeycomb film with a pore size of 5 microm showed the highest cell proliferation and ECM production profiles. These results suggest that the honeycomb film is a suitable material for designing a new vascular device.     

Sensorless IPMSM position estimation based on multi SVPWM with elimination of inverter nonlinear effects

This paper presents a position‐sensorless interior permanent magnet synchronous motor (IPMSM) control system at low and zero speed based on a multi‐space‐vector pulse‐width modulation (MSVPWM) pattern with the elimination of nonlinear inverter effects. In conventional sensorless methods based on the MSVPWM pattern, the high‐frequency (HF) components of voltage and current are used to estimate the rotor position information. However, the inverter nonlinear effects, such as forward voltage drops and deadtime, distort the HF components of the voltage and current so that an error occurs in the position estimation. Therefore, an improved position estimation scheme is developed in this paper. The compensated HF components of the voltage taking account of the inverter nonlinear effects can be used to decrease the estimation error. The proposed method can be implemented without increasing any hardware cost. Experimental results confirm the effectiveness of the proposed method. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Effects of different molting procedures on incidence of Salmonella infection in flocks of naturally contaminated laying hens in a commercial egg-producing farm by detection of yolk antibodies to Salmonella in eggs

Indirect enzyme-linked immunosorbent assays (ELISAs) have been applied to detect immunoglobulin Y antibodies to different serotypes of Salmonella in the yolks of chicken eggs with heat-extracted antigens of Salmonella enterica serotypes Agona (SA), Cerro (SC), Enteritidis (SE), Montevideo (SM), and Putten (SP). The egg yolk samples examined were classified as positive if their ELISA absorbance values exceeded the value for eggs from specific-pathogen-free flocks by more than two standard deviations. Of 30 egg yolk samples from three flocks vaccinated with a killed SE vaccine, 29 were antibody positive by the ELISA assay for the SE antigen. Four to 29 of the 29 yolk samples showed positive results for the other serovars, although the absorbance values for SE were higher than those obtained for the other serotypes in each of the yolk samples. All 30 yolks from three flocks that were not administered any SE vaccines were found to be antibody negative for SE, and two samples were determined to be positive for SC. Thirty-nine or 40 eggs were obtained from each of four layer flocks in a commercial egg production farm where the laying houses were naturally contaminated with SA, SC, SM, SP, Salmonella serovar Infantis (SI), and untypeable strains. The ELISA absorbance values for SM in the egg yolks obtained from the two flocks molted through feed withdrawal when the birds restarted laying were significantly (P < 0.05) higher than those observed in the yolks obtained before the molt. In egg yolks from the two other flocks that were molted through a wheat bran diet, there was no significant difference between the absorbance values before and after the molt. The observations in the present study provide further evidence to suggest that a molt initiated through the administration of a wheat bran diet can reduce the risk for Salmonella problems in a commercial egg-producing setting.