Direct ethanol production from barley beta-glucan by sake yeast displaying Aspergillus oryzae beta-glucosidase and endoglucanase

Three beta-glucosidase- and two endoglucanase-encoding genes were cloned from Aspergillus oryzae, and their gene products were displayed on the cell surface of the sake yeast, Saccharomyces cerevisiae GRI-117-UK. GRI-117-UK/pUDB7 displaying beta-glucosidase AO090009000356 showed the highest activity against various substrates and efficiently produced ethanol from cellobiose. On the other hand, GRI-117-UK/pUDCB displaying endoglucanase AO090010000314 efficiently degraded barley beta-glucan to glucose and smaller cellooligosaccharides. GRI-117-UK/pUDB7CB codisplaying both beta-glucosidase AO090009000356 and endoglucanase AO090010000314 was constructed. When direct ethanol fermentation from 20 g/l barley beta-glucan as a model substrate was performed with the codisplaying strain, the ethanol concentration reached 7.94 g/l after 24 h of fermentation. The conversion ratio of ethanol from beta-glucan was 69.6% of the theoretical ethanol concentration produced from 20 g/l barley beta-glucan. These results showed that sake yeast displaying A. oryzae cellulolytic enzymes can be used to produce ethanol from cellulosic materials. Our constructs have higher ethanol production potential than the laboratory constructs previously reported.     

Surface improvement on water and oil affinities and absorption rate of PVA/Tung oil-coated paperboard and fiberboard

A novel coating material on paperboard and fiberboard from poly(vinyl alcohol) (PVA) modified with Tung oil was developed. The PVA/Tung oil coating was cured at several conditions: 25, 40, 50, and 60°C, in the presence of two types of catalysts, i.e., thermal catalyst using potassium persulfate (KPS) and redox catalyst using KPS and sodium thiosulfate. The chemical crosslinked structure of PVA/Tung oil-coating films was confirmed by FTIR. The result indicated the decrease in the double bonds of Tung oil by crosslinking reaction, especially at 60°C. In comparison with the same curing temperature, the films with redox catalyst showed more reduction in the number of double bonds of Tung oil. DMA results of the PVA/Tung oil-coating materials with redox catalyst showed the lowering of the heights of both β transition peak of Tung oil and α transition peak of PVA. FTIR and DMA results confirmed the more efficient crosslinking reaction of redox catalytic system than that of the thermal catalytic system. The water resistance and mechanical properties of these coating materials exhibited better values as projected to higher curing temperature and redox catalyst. SEM images showed the smooth surface of PVA/Tung oil covered on the paperboards with ~72 µm in thickness. The contact angle of water or oil drop and dynamic change in contact angle on the surfaces of PVA/Tung oil-coated paperboards and fiberboards were investigated. The results show the contact angles for both water and oil were lower than those of the uncoated ones, indicating the improvement of water and oil affinities of the PVA/Tung oil-coating materials. The dynamic changes in contact angle of the coated ones also decreased, suggesting the reduction in water and oil absorption rates of these coated substrates.     

Optical Properties of Dysprosium-Doped Low-Phonon-Energy Glasses for a Potential 1.3 μm Optical Amplifier

Dysprosium-doped glasses were prepared in the system of gallium-based sulfide, tellurite, zirconium-baed and indium-based fluorides and their optical properties were studied. From the absorption cross sections of five f-f bands, three Judd-Ofelt parameters, ω _t ( t = 2, 4, 6), of Dy³⁺ ion were determined. The compositional variaton of the ω₂value showed the order sulfide > tellurite > fluorozirconate > fluoroindate, whereas the ω₆ value showed the opposite tendency. Compositional variaton of the fluorescence intensity ratio of the (⁴F_9/2⁶H_13/2)/(⁴F_9/2)→⁶H_15/2) is explained by the ratio of ω₂/ω₆ of doped Dy³⁺. The emission probabilities A and the branching ratio β from ⁶H_9/2 and ⁶F_11/2 levels, which are the doublet initial level of the 1.3 μm luminescence, were calculated for the glasses, and it was found that both values showed a tendency similar to that of ω₂ against the glass composition. In the sulfide glass, A was 2.6 × 10³S^-1 and β was 93%, both the highest in all of the glasses investigated. By 1.06 μm pumping of a Nd: YAG laser, the sulfide glass showed strong 1.3 μm emission and the lifetime was 25 μs, resulting in a quantum efficiency of 7%. This value is higher than that of the Pr³⁺:¹G₄ level in ZBLAN glass with β= 60%.     

Significant Roles of Regulatory T Cells and Myeloid Derived Suppressor Cells in Hepatitis B Virus Persistent Infection and Hepatitis B Virus-Related HCCs

The adaptive immune system, including type1 helper T cells (Th1 cells), cytotoxic T lymphocytes (CTLs), and dendritic cells (DCs), plays an important role in the control of hepatitis B virus (HBV). On the other hand, regulatory T cells (Tregs) and myeloid derived suppressor cells (MDSCs) suppress the immune reaction in HBV and hepatocellular carcinoma (HCC). Excessive activation of immune suppressive cells could contribute to the persistent infection of HBV and the progression of HCC. The frequency and/or function of Tregs could affect the natural course in chronic hepatitis B patients and the treatment response. In addition to the suppressive function of MDSCs, MDSCs could affect the induction and function of Tregs. Therefore, we should understand in detail the mechanism by which Tregs and MDSCs are induced to control HBV persistent infection and HBV-related HCC. Immune suppressive cells, including Tregs and MDSCs, contribute to the difficulty in inducing an effective immune response for HBV persistent infection and HBV-related HCC. In this review, we focus on the Tregs and MDSCs that could be potential targets for immune therapy of chronic hepatitis B and HBV-related HCC.     

Carbon Dioxide Sensor Mechanism of Porous Hydroxyapatite Ceramics

Hydroxyapatite and Cl⁻ -containing hydroxyapatite powders are prepared and characterized. Reversible substitution of CO^2-₃ for OH⁻ at the surface is presumed to be responsible for the sensor function. The role of Cl⁻, which is necessary to realize the sensor function and is incorporated during soaking treatment, is considered as follows. It may reduce the strain caused by the incorporation of CO^2-₃ (which is larger than OH⁻), and, hence, promote the reversible substitution reaction. This behavior is presumed because Cl⁻ -containing hydroxyapatite samples exhibit sensor characteristics typical of CO₂ without any treatment.     

DISPERSION OF GAS AND LIQUID IN BUBBLE COLUMNS OF HOMOGENEOUS BUBBLE FLOW REGIME

Mean gas holdup, lateral distribution of gas holdup and axial mixing of gas and liquid were measured in bubble columns of 12 and 19cm i.d. The lateral distribution of gas holdup was strongly dependent on the flow regimes in the column. The axial mixing of liquid in the homogeneous bubble flow regime was much smaller than that in the heterogeneous bubble flow regime, and was not expressed by existing correlations. The axial mixing of liquid in the homogeneous bubble flow and the intermediate flow regime was simulated with a flow model based on the lateral distribution of buoyancy force and the effective viscosity. The axial mixing of gas was larger than that of liquid.     

Formation of Sm2+ lons in Sol-Gel-Derived Glasses of the System Na2 O-Al2O3-SiO2

Samarium ions (Sm²⁺) incorporated into aluminosilicate glasses by a sol-gel process showed persistent spectral hole burning at room temperature. Gels of the system Na₂O-Al₂O₃SiO₂ synthesized by the hydrolysis of Si(OC₂H₅)₄, Al(OC₄H₉)₃, CH₃ COONa, and SmCl₃·6H₂O were heated in air at 500°C, then reacted with H₂ gas to form Sm²⁺ ions. Whereas Al³⁺ ions effectively dispersed the Sm³⁺ ions in the glass structure, Na⁺ ions were not effective. The Al₂O₃-SiO₂ glasses proved appropriate for reacting the Sm³⁺ ions with H₂ gas and exhibited the intense photoluminescence of Sm²⁺ ions. The reaction of Sm³⁺ ions with H₂ in the Al₂O₂-SiO₂ glasses was determined by first-order kinetics, and the activation energy equaled 95 kJ/mol. At 800°C, the maximum photoluminescence of the Sm²⁺ ions was achieved within 20 min.     

Numerical analysis of coupled transport and reaction phenomena in an anode-supported flat-tube solid oxide fuel cell

Heat and mass transfer with electrochemical reaction in an anode-supported flat-tube solid oxide fuel cell (FT-SOFC) is studied by means of three-dimensional numerical simulation. The distributions of the reaction fields in the anode-supported FT-SOFC are found to be similar to those in the planar SOFC with co-flow arrangement. However, in comparison with the latter, the concentration and activation overpotentials of the former can be reduced by additional reactant diffusion through the porous rib of the fuel channel. Parametric survey reveals that, for a fixed activation overpotential model, the output voltage can be improved by increasing the pore size of anode, while the cross-sectional geometry has smaller effect on the cell performance. Based on the results of three-dimensional simulation, we also develop a simplified numerical model of anode-supported FT-SOFC, which takes into account the concentration gradients in the thick anode of complex cross-sectional geometry. The simplified model can sufficiently predict the output voltage as well as the distributions of temperature and current density with very low computational cost. Thus, it can be used as a powerful tool for surveying wide range of anode-supported FT-SOFC design parameters.     

Synthetic Molecular Gear Based on Double-Decker Porphyrin Complexes

New rotary molecular machines (1 and 2) were synthetically constructed from two distinct porphyrin-based rotors, a cerium(IV) bis(porphyrinate)s double-decker (CeDD) and a porphyrinatorhodium(III)-based rotor. These rotors are adjacently mounted on rotational axes aligned to near vertical as resembling the bevel-gear-shaped structure. Structural study using NMR analysis reveals that these distinct rotors are connected through a coordination bond between rhodium(III) and a pyridyl group. At temperature from 193 to 393 K, each rotor represents rotational motion driven by heat fluctuation without decomposition into the corresponding precursors in dichloromethane-d ₂ and tetrachloroethane-d ₄. Importantly, the mechanical interaction between the teeth of these rotors is strongly dependent on the central metal atom in a DD rotor and the teeth structure in a porphyrinatorhodium(III)-based rotor. Understanding such relationship between the chemical structures and mechanical interaction is of importance for generating cooperative motion in the hybrid machinery system.     

Tocopherol Content and Fatty Acid Distribution of Peas (<Emphasis Type="Italic">Pisum sativum</Emphasis> L.)

The positional distribution of fatty acids (FA) of triacylglycerols (TAG) and major phospholipids (PL) prepared from four cultivars of peas (Pisum sativum L.) were investigated as well as their tocopherol contents. The lipids extracted from these peas were separated by thin-layer chromatography (TLC) into seven fractions. The major lipid components were PL (52.2–61.3%) and TAG (31.2–40.3%), while the other components were also present in minor proportions (5.6–9.2%). γ-Tocopherol was present in the highest concentration, and α- and δ-tocopherols were very small amounts. The main PL components isolated from the four cultivars were phosphatidylcholine (42.3–49.2%), followed by phosphatidylinositol (23.3–25.2%) and then phosphatidylethanolamine (17.7–20.5%). Small but significant differences (P < 0.05) in FA distribution existed when different pea cultivars were determined. However, the principal characteristics of the FA distribution in the TAG and the three PL were evident among the four cultivars; unsaturated FA were predominantly located in the sn-2 position, and saturated FA primary occupied the sn-1 or sn-3 position in the oils of the peas. These results suggest that the regional distribution of tocopherols and fatty acids in peas is not dependent on the climatic conditions and the soil characteristics of the cultivation areas during the growing season.