Charge engineering of a protein domain to allow efficient ion-exchange recovery

We have created protein domains with extreme surface charge.These mutated domains allow for ion-exchange chromatographyunder conditions favourable for selective and efficient capture,using Escherichia coli as a host organism. The staphylococcalprotein A-derived domain Z (Z_wt) was used as a scaffold whenconstructing two mutants, Z_basic1 and Z_basic2, with high positivesurface charge. Far-ultraviolet circular dichroism measurementsshowed that they have a secondary structure content comparableto the parental molecule Z_wt. Although melting temperatures(T_m) of the engineered domains were lower than that of the wild-typeZ domain, both mutants could be produced successfully as intracellularfull-length products in E.coli and purified to homogeneity byion-exchange chromatography. Further studies performed on Z_basic1and Z_basic2 showed that they were able to bind to a cation exchangereven at pH values in the 9 to 11 range. A gene fusion betweenZ_basic2 and the acidic human serum albumin binding domain (ABD),derived from streptococcal protein G, was also constructed.The gene product Z_basic2–ABD could be purified using cation-exchangechromatography from a whole cell lysate to more than 90% purity.     

Establishment and Characterization of Novel Human Intestinal In Vitro Models for Absorption and First-Pass Metabolism Studies

Commonly used intestinal in vitro models are limited in their potential to predict oral drug absorption. They either lack the capability to form a tight cellular monolayer mimicking the intestinal epithelial barrier or the expression of cytochrome P450 3A4 (CYP3A4). The aim of this study was to establish a platform of colorectal cancer patient-derived cell lines for evaluation of human intestinal drug absorption and metabolism. We characterized ten 2D cell lines out of our collection with confluent outgrowth and long-lasting barrier forming potential as well as suitability for high throughput applications with special emphasis on expression and inducibility of CYP3A4. By assessment of the transepithelial electrical resistance (TEER) the cells barrier function capacity can be quantified. Very high TEER levels were detected for HROC60. A high basal CYP3A4 expression and function was found for HROC32. Eight cell lines showed higher CYP3A4 induction by stimulation via the vitamin D receptor compared to Caco-2 cells (5.1- to 16.8-fold change). Stimulation of the pregnane X receptor led to higher CYP3A4 induction in two cell lines. In sum, we identified the two cell lines HROC183 T0 M2 and HROC217 T1 M2 as useful tools for in vitro drug absorption studies. Due to their high TEER values and inducibility by drug receptor ligands, they may be superior to Caco-2 cells to analyze oral drug absorption and intestinal drug–drug interactions. Significance statement: Selecting appropriate candidates is important in preclinical drug development. Therefore, cell models to predict absorption from the human intestine are of the utmost importance. This study revealed that the human cell lines HROC183 T0 M2 and HROC217 T1 M2 may be better suited models and possess higher predictive power of pregnane X receptor- and vitamin D-mediated drug metabolism than Caco-2 cells. Consequently, they represent useful tools for predicting intestinal absorption and simultaneously enable assessment of membrane permeability and first-pass metabolism.     

Preparation, Hardness, and Fracture Toughness of Tantalum Oxynitride Ceramics

Tantalum oxynitride powder with a baddeleyite crystal structure was synthesized and densified by hot pressing in Ar and under high pressure using a belt-type high-pressure apparatus. The tantalum oxynitride powder could not be densified completely under hot-pressing conditions at 1400°C. The use of high pressure resulted in dense materials. The samples showed a hardness of 16–17 GPa and a fracture toughness of 3–4 MPa·m^1/2. The hardness is higher compared with that of ZrO₂ and HfO₂ ceramics. The fracture toughness corresponds to the value of fully stabilized ZrO₂ due to the absence of any transformation toughening mechanism.     

Hot corrosion Type II of FeCr‐based model alloys for boiler and heat exchanger applications

The hot corrosion Type II of the alloys FeCr20, FeCr20Ni10, FeCr20Ni20, and FeCr20Co10 is investigated at 700°C in air + 0.5% SO₂ with deposits consisting of Na₂SO₄ and a eutectic mixture of Na₂SO₄ and MgSO₄ for 24, 100, and 300 h. The alloying elements nickel and cobalt have a positive influence when tests are conducted using a MgSO₄‐Na₂SO₄ deposit. In this case, they reduce the metal loss and increase the time to the propagation stage. In contrast, when the alloys are exposed with a Na₂SO₄ deposit, these alloying elements increase the metal loss and allow for the transition to the propagation stage because they can form molten phases with the Na₂SO₄. During the incubation stage an oxide scale forms on the FeCr20 alloy, which is thicker than the one formed during exposure without a deposit, and iron oxides are observed, which precipitate in the deposit. The propagation stage occurs by a dissolution and precipitation mechanism forming localized pitting attack. Iron is the main species that dissolves and precipitates, while chromium remains mainly as an oxide beneath the initial surface. The additional elements are found in the pit and in the salt deposit.     

Optimization of the property profile of poly‐L‐lactide by synthesis of PLLA‐polystyrene–block copolymers

Diblock and triblock copolymers of poly‐L ‐lactide (PLLA) and polystyrene (PS) were synthesized and the mechanical properties of these copolymers studied. Free radical polymerization of styrene in the presence of 2‐mercaptoethanol as functional chain transfer agent produced mono‐functionalized PS‐blocks which were used as macroinitiators in the subsequent ring opening polymerization (ROP) of L ‐lactide to produce the diblock copolymers. Furthermore a α‐ω‐bishydroxyl functionalized PS‐block was synthesized by RAFT, which was then engaged as bifunctional initiator for the ROP of L ‐lactide to provide the triblock copolymers PLLA‐PS‐PLLA. Through the copolymerisation and high molar masses, it was possible to achieve an improved mechanical property profile, compared with pure PLLA, or the analogous blends of PLLA and PS. A weight fraction of PS of 10–30% was found to be the optimal range for improving the heat deflection temperature (HDT), as well as mechanical properties such as ultimate tensile strength or elongation at break. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Metal Organic Frameworks for Natural Gas Storage in Vehicles

With the increasing demand for alternative fuels the storage of natural gas (NG) in adsorbents like metal organic frameworks (MOFs) will become more important. In order to use MOFs as storage media in fuel delivery systems, the optimization of mass and energy transfer of the system is crucial. For rapid NG filling of a tank, molecules need to reach the adsorption sites within a reasonable time while the heat of adsorption should be dissipated to the environment. In this article, mass transfer in shaped bodies of MOFs was determined by permeability measurements and pulsed field gradient (PFG) NMR spectroscopy. The heat dissipation was also experimentally measured and both data sets were used to set up a theoretical density function theory model to predict the behavior of MOFs for NG storage.     

Field-Assisted Densification of Superhard B6O Materials with Y2O3/Al2O3 Addition

B₆O is a possible candidate of superhard materials with a hardness of 45 GPa measured on single crystals. Up to now, densification of these materials was only possible at high pressure. However, recently it was found that Al₂O₃ can be utilized as an effective sintering additive, similar to the addition of Y₂O₃/Al₂O₃ that was used in this work. The densification behavior of the material as a function of applied pressure, its microstructure evolution, and the resulting mechanical properties were investigated. A strong dependence of the densification with increasing pressure was found. The material revealed characteristic triple junctions filled with amorphous residue composed of B₂O₃, Al₂O₃, and Y₂O₃, while no amorphous grain-boundary films were observed along internal interfaces. Mechanical testing revealed on average a hardness of 33 GPa, a fracture toughness of 4 MPa·m^1/2, and a strength value of 520 MPa.     

Synthesis and antimicrobial activities of new water‐soluble bis‐quaternary ammonium methacrylate polymers

New methacrylate monomers containing pendant quaternary ammonium moieties based on 1,4‐diazabicyclo‐[2.2.2]‐octane (DABCO) were synthesized. The DABCO group contains either a butyl or a hexyl pendant group comprising the hydrophobic segment of the monomers and one tether group to the methacrylate moiety. The monomers were homopolymerized in water by using 2,2′‐azobis(2‐methylpropionamide) dihydrochloride (V‐50) as an initiator. The monomers and polymers were characterized by elemental analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), FTIR, and ¹³C‐NMR. The antimicrobial activities of the corresponding small molecules (bis‐quaternary ammonium monocarboxylates) and polymers were investigated against Staphylococcus aureus and Escherichia coli. Although the small molecules did not show any antimicrobial activity, the polymers were moderately effective against both Gram‐positive and Gram‐negative bacteria. The minimum inhibitory concentration (MIC) values of the polymers with butyl and hexyl hydrocarbon chains against S. aureus and E. coli were found to be 250 and 62.5 μg/mL, respectively. The minimum bactericidal concentration (MBC) value for the polymer with the butyl group was higher than 1 mg/mL, whereas the MBC value for the polymer with hexyl group was found to be 62.5 μg/mL. Thus, an increase of the alkyl chain length from 4 to 6 significantly increased the antimicrobial activity of the polymer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 635–642, 2004     

Spectral characterization of periglacial surfaces and geomorphological units in the Arctic Lena Delta using field spectrometry and remote sensing

Important environmental parameters in arctic periglacial landscapes (i.e. permafrost temperature, active-layer depth, soil moisture, precipitation, vegetation cover) will very likely change in a warming climate. The thawing of permafrost, especially, might cause massive landscape changes due to thermokarst and an enhanced release of greenhouse gasses from the large amounts of carbon stored in frozen deposits, resulting in positive climate-warming feedback. For the identification, mapping, and quantification of such changes on various scales up to the entire circum-Arctic, remote sensing and spatial data analysis are essential tools. In this study an extensive field-work dataset including spectral surface properties, vegetation, soils, and geomorphology was acquired in the largest Arctic delta formed by a single river, the Siberian Lena River Delta. A portable field spectrometer (ASD FieldSpec Pro FR®) was used for spectral surveys of terrain surfaces, and optical satellite data (Landsat Enhanced Thematic Mapper (ETM+), CHRIS-Proba) were used for the characterization, manual mapping, and automatic classification of typical periglacial land-cover units in the Lena Delta. Qualitative data from soils, vegetation, soil moisture, and relief units were correlated with the field-spectral data and catalogued for a wide variety of surface types. The wide range of micro- and meso-scale variations of periglacial surface features in the delta results in distinctive spectral characteristics for different land-cover units. The three main delta terraces could also be spectrally separated and characterized. The present dataset provides a basis for further spectral data acquisitions in the Lena Delta and for comparisons with periglacial surfaces from other regions.