Effect of short wavelength illumination on the characteristic bulk diffusion length in ribbon silicon solar cells

The influence of short wavelength light on the characteristic bulk minority carrier diffusion length of the ribbon silicon photovoltaic cell has been investigated. We have measured the intensity and wavelength dependence of the diffusion length in an EFG ribbon cell, and compared it with a standard Czochralski grown silicon cell. While the various short wavelength illuminations have shown no influence on the diffusion length in the CZ cell, the diffusion lengths in the ribbon cell exhibit a strong dependence on the volume generate rate as well as on the wavelength of the superimposed lights. We have concluded that the trap-filling phenomenon at various depths in the bulk neutral region of the cell is consistent with the experimental observation.     

DDT-related compounds bound to the nonextractable particulate matter in sediments of the Teltow Canal,Germany

Sediment samples of the Teltow Canal (Berlin, Germany) were analyzed with respect to extractable and nonextractable organic compounds. The study focused on the identification and quantitation of bound 2,2-bis(chlorophenyl)-1,1,1-trichlorethane (DDT) residues in order to obtain further information about the fate of DDT-derived compounds within the particulate matter of the aquatic environment. Various chemical degradation techniques and a complementary online pyrolysis-GC/MS method were applied to the pre-extracted sediment residues. Generally, the distribution of the bound DDT-related compounds was found to differ distinctly from the substances distribution within the extractable fraction. The main metabolite of the anaerobic degradation pathway (2,2-bis(chlorophenyl)-1,1-dichlorethane, DDD) is most abundant in the sediment extracts but occurred only in insignificant concentrations in the degradation products of all procedures applied. The most abundant DDT-metabolites released after the degradation procedures were 4,4'-DBP, 4,4'-DDA, and 4,4'-DDM. In addition, 4,4'-DDM was detected at rather high concentrations by pyrolytic analysis. The results imply a weak association to the nonextractable particulate matter based on noncovalent interactions for the observed DDT-related contaminants. The release of these compounds was initiated by the modification and degradation of the organic macromolecular matrix as well as of the inorganic material. Furthermore, numerous methoxychlor-related compounds were detected not only in the extracts but also in parts of the hydrolysis products.     

Development of surgical instruments for implanting a flexible fixation device for the lumbar spine

A new flexible fixation device for the lumbar spine has been developed. This paper describes the development and evaluation of two surgical instruments required for implanting this device. Prototypes were designed, manufactured and then evaluated for use in surgery. Further evaluation was performed, if necessary, and the design finalized, in accordance with BS EN 12011. This process involved close collaboration between engineers and surgeons.     

Continuous assessments of pressure comfort on a train - A field-laboratory comparison

Pressure variations on a train predominantly occur while trains are passing through tunnels. These aerodynamic effects may give rise to aural discomfort in railway passengers. We conducted a field study on the high speed railway track Cologne-Frankfurt/Main as well as a simulation study in our pressure chamber TITAN (DLR-Institute of Aerospace Medicine) with 31 subjects (mean age?=?37.7, SD?=?12.7; 51.6% male) to investigate pressure comfort for passengers. Continuous assessments of pressure events using sliders and retrospective assessments were acquired. Pressure variations were mostly tolerated. A comparison of field and laboratory setting revealed high congruency of continuous as well as retrospective assessments. A generalized estimating equation model identified pressure change attributes contributing to passengers' discomfort. Beside attributes of instantaneous pressure changes (e.g. high amplitudes, short durations), pressure events of the recent past significantly influenced current discomfort. Design engineers may use these findings to improve train and tunnel design.     

Design of polymeric dispersants for waterborne coatings

Block and random copolymers of ammonium methacrylate and dimeth-ylaminoethyl methacrylate have been synthesized and tested as dispersants of various organic and inorganic pigments in formulations for waterborne paints. Blockiness of the co-monomer distribution is a prerequisite for good color characteristics in the final paint. It is however noteworthy that a tapered diblock (one-step anionic synthesis), a diblock copolymer with a regular change in composition from one block to the other one, has an interfacial activity quite comparable to the parent “pure” diblock copolymer (two-step anionic synthesis). The most interesting observation is that the poly(dimethylaminoethyl methacrylate) anchoring block can impart stability to dispersions of pigments as different as iron oxide, a blue Cu-phthalocyanine pigment, and a red organic pigment based on pyrrole in representative aqueous paint formulations. This type of diblock copolymer is promising for the design of universal dispersants. Center for Education and Research on Macromolecules (CERM), Sart-Tilman, B6, 4000 Liège, Belgium. Rijksstraatweg 31, P.O.Box 3, 2170 BA Sassenheim, The Netherlands.     

Energy-efficient cooking methods

Energy-efficient new cooking techniques have been developed in this research. Using a stove with 649?±?20 W of power, the minimum heat, specific heat of transformation, and on-stove time required to completely cook 1 kg of dry beans (with water and other ingredients) and 1 kg of raw potato are found to be: 710 (±24)?kJ, 613 (±20)?kJ, and 1,144?±?10 s, respectively, for beans and 287?±?12 kJ, 200?±?9 kJ, and 466?±?10 s for Irish potato. Extensive researches show that these figures are, to date, the lowest amount of heat ever used to cook beans and potato and less than half the energy used in conventional cooking with a pressure cooker. The efficiency of the stove was estimated to be 52.5?±?2 %. Discussion is made to further improve the efficiency in cooking with normal stove and solar cooker and to save food nutrients further. Our method of cooking when applied globally is expected to contribute to the clean development management (CDM) potential. The approximate values of the minimum and maximum CDM potentials are estimated to be 7.5?×?10¹¹ and 2.2?×?10¹³?kg of carbon credit annually. The precise estimation CDM potential of our cooking method will be reported later.     

Accurate environmental bioindication in floodplains in spite of an extreme flood event

The ecological reaction of species on environmental factors can differ both, temporally and geographically. Therefore, bioindicator systems must be shown to remain accurate at different places and points of time. Extreme events pose challenges for testing this robustness, which has not yet been explored systematically. The unique opportunity of the extreme flooding of the river Elbe in August 2002 was used for such a test. The bioindicator system for mean groundwater depth during the vegetation period and annual duration of inundation in floodplains studied here was developed with data collected in 1999. Data from 2003 were used to analyse the dependence of the bioindication results on the humidity of the study plots and taxonomic group (plants, molluscs and carabid beetles). For the duration of inundation, the accuracy of bioindication in 2003 was similar to that in 1999, except for the medium‐humid and dry plots using molluscs as indicators. For groundwater depth, the accuracy of bioindication in 2003 was similar to that of the reference year except in the dry plots with significantly lower accuracy for all species groups. With a few exceptions, the bioindicator system is shown to be robust and to remain accurate in spite of an extreme flood event. In conclusion, the relevance of extreme events for the robustness of bioindicator systems differs between the indicated parameters and taxonomic groups. The results stress the need to take into account the limits of the working range and the occurrence of extreme events, when testing and applying bioindicator systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of chemical composition on mechanical properties of spark plasma sintered boron carbide monoliths

Fully dense boron carbide monoliths exhibiting fine microstructure (i.e., submicrometric grain size) are sintered by Spark Plasma Sintering. Two different commercial powder batches, exhibiting different stoichiometries (i.e., B/C ratio and oxygen content) and various amounts of secondary phases (i.e., boric acid and free carbon), are used. Their chemical composition is well‐defined by coupling different methods (Transmission Electron Microscopy associated with XRD analyses, and Instrumental Gas Analysis), and are correlated with their mechanical properties, characterized from meso‐ to macro‐scopic scales by nano‐indentation and ultrasonic pulse echography. The presence of secondary phases (graphite and boric acid) is evidenced in various proportions in each powder batch. If the boric acid disappears during sintering, the graphite remains. However, for the considered amounts of graphite (lower than 1 wt%), the low variations in graphite content have no significant effect on hardness and elasticity values. At the opposite, the presence of oxygen in boron carbide lattice, leading to a boron oxycarbide phase, induces a decrease in both hardness and elasticity properties.