Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Architectural optimization for microelectronic packaging

The aim of this paper is to provide a methodical approach for architectural optimization of power microelectronic devices. Because critical parameters of electronic devices are linked with reliability, architectural optimization, selection of the geometrical parameters of device and optimization of these parameters by iteration method associated by numerical analysis of reliability have to be achieved. In this way, this paper discusses about a methodical and numerical approach for the optimization of reliability in electronic devices, in particular the influence of geometrical parameters on the device reliability.     

Molecular composites based on thermosetting matrix polymers: Poly(p-phenyleneterephthalamide)-epoxy

Poly(p-phenyleneterephthalamide) (PPTA) reinforced molecular composites that utilize a thermosetting epoxy as the matrix polymer have been prepared by an in situ polymerization process. The properties of these molecular composites were compared with those of Kevlar pulp-filled composites that utilized the same matrix formulation. Study of the curing reactions of these systems using Fourier transform infrared, dynamic mechanical analysis, and nuclear magnetic resonance spectroscopy indicated some differences in the reactivity and ultimate polymer structure of these two systems. A comparison of the properties indicated increased tensile strength, modulus, and heat resistance for the molecularly reinforced material over the conventional fiber-filled system. Examination of the morphology of the molecular composite system showed that aggregated PPTA molecules are formed during the in situ polymerization process. This aggregation phenomenon was found to be due to formation of a liquid crystalline polymer solution during processing and final cure. These findings indicate the possibilities that exist in molecular composite processing for simultaneous control of the properties of the matrix and the reinforcement.     

The Role of Plasma Extracellular Vesicles in Remote Ischemic Conditioning and Exercise-Induced Ischemic Tolerance

Ischemic conditioning and exercise have been suggested for protecting against brain ischemia-reperfusion injury. However, the endogenous protective mechanisms stimulated by these interventions remain unclear. Here, in a comprehensive translational study, we investigated the protective role of extracellular vesicles (EVs) released after remote ischemic conditioning (RIC), blood flow restricted resistance exercise (BFRRE), or high-load resistance exercise (HLRE). Blood samples were collected from human participants before and at serial time points after intervention. RIC and BFRRE plasma EVs released early after stimulation improved viability of endothelial cells subjected to oxygen-glucose deprivation. Furthermore, post-RIC EVs accumulated in the ischemic area of a stroke mouse model, and a mean decrease in infarct volume was observed for post-RIC EVs, although not reaching statistical significance. Thus, circulating EVs induced by RIC and BFRRE can mediate protection, but the in vivo and translational effects of conditioned EVs require further experimental verification.     

Synthesis and thermal decomposition of potassium tetraamidoboranealuminate,K[Al(NH2BH3)4]

A new potassium tetraamidoboranealuminate, K[Al(NH₂BH₃)₄], has been synthesized by a mechanochemical reaction between KAlH₄ and NH₃BH₃. The compound, K[Al(NH₂BH₃)₄], crystallizes in a triclinic unit cell with space group symmetry P?1. The crystal structure consists of [K(NH₂BH₃)₆]^5? octahedra which facilitate the bridging between K⁺ in 1D chains, while also bridging K⁺ to Al³⁺ to connect the 1D chains in a 3D network. Thermal analysis reveals that K[Al(NH₂BH₃)₄] decomposes in two exothermic steps at T ～ 94 and 138 °C and releases primarily hydrogen. The total gas release amounts to ～6.0 wt% H₂. The decomposition products are investigated ex situ by powder X-ray diffraction, infrared spectroscopy, and ¹¹B and ²⁷Al NMR and identified as KBH₄ and amorphous phases, possibly BN₃, N₂BH, and/or NBH₂ whereas aluminum is found in four-, five-, and six-fold coordination. Unfortunately, the decomposed sample shows no hydrogen absorption at T = 260 °C and p(H₂) = 110 bar.     

The impact of different hop compounds on the growth of selected beer spoilage bacteria in beer

Beer spoiling lactic acid bacteria are a major reason for quality complaints in breweries around the world. Spoilage by a variety of these bacteria can result in haze, sediment, slime, off-flavours and acidity. As these bacteria occur frequently in the brewing environment, using certain hop products that inhibit the growth of these spoilers could be a solution to prevent problems. To investigate the impact of seven different hop compounds (α-acids, iso-α-acids, tetrahydro-iso-α-acids, rho-iso-α-acids, xanthohumol, iso-xanthohumol and humulinones) on the growth of six major beer spoilage bacteria (Lactobacillus brevis. L. backi, L. coryniformis, L. lindneri, L. buchneri, Pediococcus damnosous), two concentrations (10 and 25 mg/L) of each hop substance were added to unhopped beer. The potential growth of the spoilage bacteria was investigated over 56 consecutive days. A comparison of the results shows a strong inhibition of growth of all spoilage bacteria at 25 mg/L of tetrahydro-iso-α-acids closely followed by α-acids as the second most inhibitory substance. The results showed a high resistance of L. brevis to all hop compounds as well as an inhibition of L. coryniformis and L. buchneri at low concentrations of most hop components. In comparison with the control sample, L. lindneri showed increased growth in the presence of some hop compounds (rho-iso-α-acids, xanthohumol, iso-xanthohumol, humulinones). © 2020 The Authors. Journal of the Institute of Brewing published by John Wiley & Sons Ltd on behalf of The Institute of Brewing & Distilling     

A new one-phase material model for the numerical prediction of critical material flow conditions in thixoforging processes

Thixoforging allows one-step forming processes of near-net shape components having excellent mechanical properties. However, the high sensitivity of thixoforging regarding process conditions requires precise modelling and determination of process related parameters. At the same time, simple numerical design proves challenging because of the inaccuracy of existing one-phase material models regarding the shear thinning flow behaviour of semi solid metals. Consequently, this paper deals with the development of a new one-phase material model providing a more precise simulation of materials’ shear rate dependency. By using this model, simulations could be performed, which allowed the prediction of solidification and flow-related component defects.     

Growth arrest of Epstein-Barr virus immortalized B lymphocytes by adenovirus-delivered ribozymes

Epstein-Barr virus (EBV) infection is associated with several human diseases that involve unrestricted proliferation of B lymphocytes. EBV nuclear antigen 1 (EBNA-1) is expressed in all EBV-infected cells and plays an essential role in persistence of the EBV genome. EBNA-1 has also been reported to have oncogenic potential. As an approach for treating EBV infections, we examined the capacity of EBNA-1 ribozymes delivered by recombinant adenoviruses to suppress EBNA-1 expression and to block virus-induced B cell proliferation. In contrast to primary B cells, EBV-transformed B lymphoblastoid cell lines expressed alphav integrins, the adenovirus internalization receptors, and were also susceptible to adenovirus-mediated gene delivery. Adenovirus delivery of a specific ribozyme (RZ1) to lymphoblastoid cell lines, suppressed EBNA-1 mRNA and protein expression, significantly reduced the number of EBV genomes, and nearly abolished cell proliferation in low serum. Adenovirus delivery of RZ1 also prevented EBV infection of an established EBV-negative B cell line. These studies demonstrate the potential use of adenovirus-encoded ribozymes to treat EBV-induced lymphoproliferative disorders.