DDT-related compounds bound to the nonextractable particulate matter in sediments of the Teltow Canal,Germany

Sediment samples of the Teltow Canal (Berlin, Germany) were analyzed with respect to extractable and nonextractable organic compounds. The study focused on the identification and quantitation of bound 2,2-bis(chlorophenyl)-1,1,1-trichlorethane (DDT) residues in order to obtain further information about the fate of DDT-derived compounds within the particulate matter of the aquatic environment. Various chemical degradation techniques and a complementary online pyrolysis-GC/MS method were applied to the pre-extracted sediment residues. Generally, the distribution of the bound DDT-related compounds was found to differ distinctly from the substances distribution within the extractable fraction. The main metabolite of the anaerobic degradation pathway (2,2-bis(chlorophenyl)-1,1-dichlorethane, DDD) is most abundant in the sediment extracts but occurred only in insignificant concentrations in the degradation products of all procedures applied. The most abundant DDT-metabolites released after the degradation procedures were 4,4'-DBP, 4,4'-DDA, and 4,4'-DDM. In addition, 4,4'-DDM was detected at rather high concentrations by pyrolytic analysis. The results imply a weak association to the nonextractable particulate matter based on noncovalent interactions for the observed DDT-related contaminants. The release of these compounds was initiated by the modification and degradation of the organic macromolecular matrix as well as of the inorganic material. Furthermore, numerous methoxychlor-related compounds were detected not only in the extracts but also in parts of the hydrolysis products.     

Development of surgical instruments for implanting a flexible fixation device for the lumbar spine

A new flexible fixation device for the lumbar spine has been developed. This paper describes the development and evaluation of two surgical instruments required for implanting this device. Prototypes were designed, manufactured and then evaluated for use in surgery. Further evaluation was performed, if necessary, and the design finalized, in accordance with BS EN 12011. This process involved close collaboration between engineers and surgeons.     

Continuous assessments of pressure comfort on a train - A field-laboratory comparison

Pressure variations on a train predominantly occur while trains are passing through tunnels. These aerodynamic effects may give rise to aural discomfort in railway passengers. We conducted a field study on the high speed railway track Cologne-Frankfurt/Main as well as a simulation study in our pressure chamber TITAN (DLR-Institute of Aerospace Medicine) with 31 subjects (mean age?=?37.7, SD?=?12.7; 51.6% male) to investigate pressure comfort for passengers. Continuous assessments of pressure events using sliders and retrospective assessments were acquired. Pressure variations were mostly tolerated. A comparison of field and laboratory setting revealed high congruency of continuous as well as retrospective assessments. A generalized estimating equation model identified pressure change attributes contributing to passengers' discomfort. Beside attributes of instantaneous pressure changes (e.g. high amplitudes, short durations), pressure events of the recent past significantly influenced current discomfort. Design engineers may use these findings to improve train and tunnel design.     

Energy-efficient cooking methods

Energy-efficient new cooking techniques have been developed in this research. Using a stove with 649?±?20 W of power, the minimum heat, specific heat of transformation, and on-stove time required to completely cook 1 kg of dry beans (with water and other ingredients) and 1 kg of raw potato are found to be: 710 (±24)?kJ, 613 (±20)?kJ, and 1,144?±?10 s, respectively, for beans and 287?±?12 kJ, 200?±?9 kJ, and 466?±?10 s for Irish potato. Extensive researches show that these figures are, to date, the lowest amount of heat ever used to cook beans and potato and less than half the energy used in conventional cooking with a pressure cooker. The efficiency of the stove was estimated to be 52.5?±?2 %. Discussion is made to further improve the efficiency in cooking with normal stove and solar cooker and to save food nutrients further. Our method of cooking when applied globally is expected to contribute to the clean development management (CDM) potential. The approximate values of the minimum and maximum CDM potentials are estimated to be 7.5?×?10¹¹ and 2.2?×?10¹³?kg of carbon credit annually. The precise estimation CDM potential of our cooking method will be reported later.     

Studying Fluid Characteristics Atop Surface Patterned Membranes via Particle Image Velocimetry

Surface patterning is a recent promising approach to promote performance of pressure-driven membranes in water treatment and desalination. Nevertheless, knowledge about foulant deposition mechanisms, especially at early stage of filtration, is still lacking. The applicability of particle imaging velocimetry to study fluid characteristics atop surface patterned thin-film composite membranes was investigated at different operating conditions. This work is an important first step toward reliable understanding of the impacts of topographical membrane surface modification on hydrodynamic conditions and foulant deposition mechanisms.     

Influence of chemical composition on mechanical properties of spark plasma sintered boron carbide monoliths

Fully dense boron carbide monoliths exhibiting fine microstructure (i.e., submicrometric grain size) are sintered by Spark Plasma Sintering. Two different commercial powder batches, exhibiting different stoichiometries (i.e., B/C ratio and oxygen content) and various amounts of secondary phases (i.e., boric acid and free carbon), are used. Their chemical composition is well‐defined by coupling different methods (Transmission Electron Microscopy associated with XRD analyses, and Instrumental Gas Analysis), and are correlated with their mechanical properties, characterized from meso‐ to macro‐scopic scales by nano‐indentation and ultrasonic pulse echography. The presence of secondary phases (graphite and boric acid) is evidenced in various proportions in each powder batch. If the boric acid disappears during sintering, the graphite remains. However, for the considered amounts of graphite (lower than 1 wt%), the low variations in graphite content have no significant effect on hardness and elasticity values. At the opposite, the presence of oxygen in boron carbide lattice, leading to a boron oxycarbide phase, induces a decrease in both hardness and elasticity properties.     

Fibroblast Growth Factor 21 Response in a Preclinical Alcohol Model of Acute-on-Chronic Liver Injury

Background and Aims: Fibroblast growth factor (FGF) 21 has recently been shown to play a potential role in bile acid metabolism. We aimed to investigate the FGF21 response in an ethanol-induced acute-on-chronic liver injury (ACLI) model in Abcb4^−/− mice with deficiency of the hepatobiliary phospholipid transporter. Methods: Total RNA was extracted from wild-type (WT, C57BL/6J) and Abcb4⁻/⁻ (KO) mice, which were either fed a control diet (WT-Cont and KO-Cont groups; n = 28/group) or ethanol diet, followed by an acute ethanol binge (WT-EtOH and KO-EtOH groups; n = 28/group). A total of 58 human subjects were recruited into the study, including patients with alcohol-associated liver disease (AALD; n = 31) and healthy controls (n = 27). The hepatic and ileal expressions of genes involved in bile acid metabolism, plasma FGF levels, and bile acid and its precursors 7α- and 27-hydroxycholesterol (7α- and 27-OHC) concentrations were determined. Primary mouse hepatocytes were isolated for cell culture experiments. Results: Alcohol feeding significantly induced plasma FGF21 and decreased hepatic Cyp7a1 levels. Hepatic expression levels of Fibroblast growth factor receptor 1 (Fgfr1), Fgfr4, Farnesoid X-activated receptor (Fxr), and Small heterodimer partner (Shp) and plasma FGF15/FGF19 levels did not differ with alcohol challenge. Exogenous FGF21 treatment suppressed Cyp7a1 in a dose-dependent manner in vitro. AALD patients showed markedly higher FGF21 and lower 7α-OHC plasma levels while FGF19 did not differ. Conclusions: The simultaneous upregulation of FGF21 and downregulation of Cyp7a1 expressions upon chronic plus binge alcohol feeding together with the invariant plasma FGF15 and hepatic Shp and Fxr levels suggest the presence of a direct regulatory mechanism of FGF21 on bile acid homeostasis through inhibition of CYP7A1 by an FGF15-independent pathway in this ACLI model. Lay Summary: Alcohol challenge results in the upregulation of FGF21 and repression of Cyp7a1 expressions while circulating FGF15 and hepatic Shp and Fxr levels remain constant both in healthy and pre-injured livers, suggesting the presence of an alternative FGF15-independent regulatory mechanism of FGF21 on bile acid homeostasis through the inhibition of Cyp7a1.     

Cutaneous Adverse Events Associated with Interferon-β Treatment of Multiple Sclerosis

Interferons are widely used platform therapies as disease-modifying treatment of patients with multiple sclerosis. Although interferons are usually safe and well tolerated, they frequently cause dermatological side effects. Here, we present a multiple sclerosis (MS) patient treated with interferon-β who developed new-onset psoriasis. Both her MS as well as her psoriasis finally responded to treatment with fumarates. This case illustrates that interferons not only cause local but also systemic adverse events of the skin. These systemic side effects might indicate that the Th17/IL-17 axis plays a prominent role in the immunopathogenesis of this individual case and that the autoimmune process might be deteriorated by further administration of interferons. In conclusion, we think that neurologists should be aware of systemic cutaneous side effects and have a closer look on interferon-associated skin lesions. Detection of psoriasiform lesions might indicate that interferons are probably not beneficial in the individual situation. We suggest that skin lesions may serve as biomarkers to allocate MS patients to adequate disease-modifying drugs.     

Design of an Ultrafast G Protein Switch Based on a Mouse Melanopsin Variant

The primary goal of optogenetics is the light-controlled noninvasive and specific manipulation of various cellular processes. Herein, we present a hybrid strategy for targeted protein engineering combining computational techniques with electrophysiological and UV/visible spectroscopic experiments. We validated our concept for channelrhodopsin-2 and applied it to modify the less-well-studied vertebrate opsin melanopsin. Melanopsin is a promising optogenetic tool that functions as a selective molecular light switch for G protein-coupled receptor pathways. Thus, we constructed a model of the melanopsin G_q protein complex and predicted an absorption maximum shift of the Y211F variant. This variant displays a narrow blue-shifted action spectrum and twofold faster deactivation kinetics compared to wild-type melanopsin on G protein-coupled inward rectifying K⁺ (GIRK) channels in HEK293 cells. Furthermore, we verified the in vivo activity and optogenetic potential for the variant in mice. Thus, we propose that our developed concept will be generally applicable to designing optogenetic tools.