Energy-efficient cooking methods

Energy-efficient new cooking techniques have been developed in this research. Using a stove with 649?±?20 W of power, the minimum heat, specific heat of transformation, and on-stove time required to completely cook 1 kg of dry beans (with water and other ingredients) and 1 kg of raw potato are found to be: 710 (±24)?kJ, 613 (±20)?kJ, and 1,144?±?10 s, respectively, for beans and 287?±?12 kJ, 200?±?9 kJ, and 466?±?10 s for Irish potato. Extensive researches show that these figures are, to date, the lowest amount of heat ever used to cook beans and potato and less than half the energy used in conventional cooking with a pressure cooker. The efficiency of the stove was estimated to be 52.5?±?2 %. Discussion is made to further improve the efficiency in cooking with normal stove and solar cooker and to save food nutrients further. Our method of cooking when applied globally is expected to contribute to the clean development management (CDM) potential. The approximate values of the minimum and maximum CDM potentials are estimated to be 7.5?×?10¹¹ and 2.2?×?10¹³?kg of carbon credit annually. The precise estimation CDM potential of our cooking method will be reported later.     

Photoclickable Surfaces for Profluorescent Covalent Polymer Coatings

The nitrile imine‐mediated tetrazole‐ene cycloaddition reaction (NITEC) is introduced as a powerful and versatile conjugation tool to covalently ligate macromolecules onto variable (bio)surfaces. The NITEC approach is initiated by UV irradiation and proceeds rapidly at ambient temperature yielding a highly fluorescent linkage. Initially, the formation of block copolymers by the NITEC methodology is studied to evidence its efficacy as a macromolecular conjugation tool. The grafting of polymers onto inorganic (silicon) and bioorganic (cellulose) surfaces is subsequently carried out employing the optimized reaction conditions obtained from the macromolecular ligation experiments and evidenced by surface characterization techniques, including X‐ray photoelectron spectroscopy and FT‐IR microscopy. In addition, the patterned immobilization of variable polymer chains onto profluorescent cellulose is achieved through a simple masking process during the irradiation.     

Ultrafast compound imaging for 2-D motion vector estimation: application to transient elastography

This paper describes a new technique for two-dimensional (2-D) imaging of the motion vector at a very high frame rate with ultrasound. Its potential is experimentally demonstrated for transient elastography. But, beyond this application, it also could be promising for color flow and reflectivity imaging. To date, only axial displacements induced in human tissues by low-frequency vibrators were measured during transient elastography. The proposed technique allows us to follow both axial and lateral displacements during the shear wave propagation and thus should improve Young's modulus image reconstruction. The process is a combination of several ideas well-known in ultrasonic imaging: ultra-fast imaging, multisynthetic aperture beamforming, 1-D speckle tracking, and compound imaging. Classical beamforming in the transmit mode is replaced here by a single plane wave insonification increasing the frame rate by at least a factor of 128. The beamforming is achieved only in the receive mode on two independent subapertures. Comparison of successive frames by a classical 1-D speckle tracking algorithm allows estimation of displacements along two different directions linked to the subapertures beams. The variance of the estimates is finally improved by tilting the emitting plane wave at each insonification, thus allowing reception of successive decorrelated speckle patterns.     

Parallel flow measurements in microstructures by use of a multifocal 4 x 1 diffractive optical fan-out element

We have developed a multifocal optical fluorescence correlation spectroscopy system for parallel flow analyses. Multifocal excitation was made possible through a 4 x 1 diffractive optical fan-out element, which produces uniform intensity in all four foci. Autocorrelation flow analyses inside a 20 microm x 20 microm square microchannel, with the 4 x 1 fan-out foci perpendicular to the flow direction, made it possible to monitor different flows in all four foci simultaneously. We were able to perform cross-correlation flow analyses by turning the microstructure, thereby having all four foci parallel to the direction of flow. Transport effects of the diffusion as a function of flow and distance could then also be studied.     

Effect of short wavelength illumination on the characteristic bulk diffusion length in ribbon silicon solar cells

The influence of short wavelength light on the characteristic bulk minority carrier diffusion length of the ribbon silicon photovoltaic cell has been investigated. We have measured the intensity and wavelength dependence of the diffusion length in an EFG ribbon cell, and compared it with a standard Czochralski grown silicon cell. While the various short wavelength illuminations have shown no influence on the diffusion length in the CZ cell, the diffusion lengths in the ribbon cell exhibit a strong dependence on the volume generate rate as well as on the wavelength of the superimposed lights. We have concluded that the trap-filling phenomenon at various depths in the bulk neutral region of the cell is consistent with the experimental observation.     

Assessment of elastic parameters of human skin using dynamic elastography

Sonoelastography and transient elastography are two ultrasound-based techniques that facilitate noninvasive characterization of the viscoelastic properties of soft tissues by investigating their response to shear mechanical excitation. Young's modulus is the principle assessment parameter. Because it defines local tissue stiffness, it is of major interest for the medical imaging and cosmetic industries as it could replace subjective palpation by yielding local, quantitative information. In this paper, we describe a new high-resolution device capable of measuring local Young's modulus in very thin layers (1-5 mm) and devoted to the in vivo evaluation of the elastic properties of human skin. It uses an ultrasonic probe (50 MHz) for tracking the displacements induced by a 300 Hz shear wave generated by a ring surrounding the transducer. The displacements are measured using a conventional cross-correlation technique between successive ultrasonic back-scattered echoes. First, this noninvasive technique has been experimentally proven to be accurate for investigating elasticity in different skin-mimicking phantoms. Second, data were acquired in vivo on human forearms. As expected, Young's modulus was found to be higher in the dermis than in the hypodermis and other soft tissues.     

Improving pulse sequences for 3D diffusion-ordered NMR spectroscopy: 2DJ-IDOSY

An improved pulse sequence for the 3D DOSY experiment 2DJ-DOSY, using diffusion encoding internal to the parent 2DJ spectroscopy sequence (2DJ-IDOSY), is presented. The diffusion-encoding pulses are used to enforce the desired coherence transfer pathway, reducing the minimum experimental time by at least a factor of 4, as compared to existing techniques, and approximately doubling the signal-to-noise ratio for small molecules. The new sequence is demonstrated on a simple mixture and on a complex sample with a high dynamic range (port wine). The principle of internal diffusion encoding can be applied with profit to a range of other 3D DOSY experiments.     

Postural changes in plasma renin activity and responses to vasoactive drugs in a case of Shy-Drager syndrome

A male aged 47 years with gross autonomic insufficiency as part of the Shy-Drager syndrome is described. He did not sweat normally when warmed, and his circulatory responses to mental arithmetic, the Valsalva manoeuvre, and head-up tilt were abnormal indicating severe sympathetic failure. During head-up tilt there was a rise in plasma renin activity and plasma aldosterone. It is argued that plasma renin activity is not dependent on sympathetic nervous activity and may be mediated by renal baroreceptors. These rises may help sustain the blood pressure in such patients during repeated head-up tilts. Infusions of L-noradrenaline and angiotension produced greater hypertension, and injections of isoprenaline greater hypotension than in controls. Although it is difficult to exclude the possibility that one factor in this may be hypersensitivity of receptors in blood vessel walls, the principal factor is likely to be the absence of those baroreflexes of which the efferent pathways are in the sympathetic nervous system.     

DDT-related compounds bound to the nonextractable particulate matter in sediments of the Teltow Canal,Germany

Sediment samples of the Teltow Canal (Berlin, Germany) were analyzed with respect to extractable and nonextractable organic compounds. The study focused on the identification and quantitation of bound 2,2-bis(chlorophenyl)-1,1,1-trichlorethane (DDT) residues in order to obtain further information about the fate of DDT-derived compounds within the particulate matter of the aquatic environment. Various chemical degradation techniques and a complementary online pyrolysis-GC/MS method were applied to the pre-extracted sediment residues. Generally, the distribution of the bound DDT-related compounds was found to differ distinctly from the substances distribution within the extractable fraction. The main metabolite of the anaerobic degradation pathway (2,2-bis(chlorophenyl)-1,1-dichlorethane, DDD) is most abundant in the sediment extracts but occurred only in insignificant concentrations in the degradation products of all procedures applied. The most abundant DDT-metabolites released after the degradation procedures were 4,4'-DBP, 4,4'-DDA, and 4,4'-DDM. In addition, 4,4'-DDM was detected at rather high concentrations by pyrolytic analysis. The results imply a weak association to the nonextractable particulate matter based on noncovalent interactions for the observed DDT-related contaminants. The release of these compounds was initiated by the modification and degradation of the organic macromolecular matrix as well as of the inorganic material. Furthermore, numerous methoxychlor-related compounds were detected not only in the extracts but also in parts of the hydrolysis products.