Defensive allomones in three species ofHypselodoris (gastropoda: Nudibranchia) from the Cantabrian sea

ThreeHypselodoris species,H. villafranca, H. cantabrica, and H. tricolor, have been studied in order to further investigate the defensive strategies of Chromodorididae mollusks from Iberian coasts. All animals possess large amounts of furanosesquiterpenoids, probably derived from their diet of sponges. The products are transferred and stored in specific sites of the mantle (mantle dermal formations, MDFs) to be used as chemical deterrents against predators. Chemical analysis of CantabrianHypselodoris species has led to the characterization of eight sesquiterpenoids. Among these, six have been found previously in both sponges and nudibranchs, while two are new natural products.Hypselodoris species cooccurring in the same area contained comparable mixtures of sesquiterpenoids. However, two populations ofH. cantabrica from different sites of the Cantabrian sea showed different metabolic patterns. All sesquiterpenoids induce feeding deterrence inCarassius auratus and two are also toxic toGambusia affinis.     

Randomized range-maxima in nearly-constant parallel time

Given an array ofn input numbers, therange-maxima problem is that of preprocessing the data so that queries of the type what is the maximum value in subarray [i..j] can be answered quickly using one processor. We present a randomized preprocessing algorithm that runs inO(log^* n) time with high probability, using an optimal number of processors on a CRCW PRAM; each query can be processed in constant time by one processor. We also present a randomized algorithm for a parallel comparison model. Using an optimal number of processors, the preprocessing algorithm runs inO( (n)) time with high probability; each query can be processed inO ( (n)) time by one processor. (As is standard, (n) is the inverse of Ackermann function.) A constant time query can be achieved by some slowdown in the performance of the preprocessing stage.     

Capacity of the electric double layer in molten NaAlCl4

The capacity of the electric double layer at the interfaces Hg/molten NaAlCl₄ and Pt/molten NaAlCl₄ was determined and the influence of the surface-active substances tetramethylammonium chloride and urea was investigated. The dependence of the capacity on the electrode potential was found to agree with a model proposed by Parsons.     

Manipulating the microstructure and rheology in polymer‐organoclay composites

A series of nanocomposites prepared by melt‐blending of cloisite‐based organoclays with poly(ethylene‐vinylacetate) (EVA) and neutralized poly (ethylene‐methacrylic acid) (EMA) copolymers were investigated via DSC, small‐angle X‐ray scattering (SAXS), and rheological techniques. SAXS results indicated partial clay exfoliation in all samples. In both EMA and EVA systems, the nominal melting temperature T_m and bulk crystallinity are not significantly affected by the presence of organoclays, suggesting that clay particles are predominantly confined in the amorphous phase. In rheological measurements (above T_m), the EVA‐clay system demonstrated a solid‐like rheological behavior under the small‐strain oscillatory shear, yet it was able to yield and flow under a steady shear, which is the characteristic of physical crosslinking. In contrast, the EMA‐clay system exhibited a melt‐like rheological behavior, where the influence of organoclay on the thermorheological behavior of the EMA composite was quite minimal. We propose that the carbonyl groups of vinylacetate in EVA interact with the clay surface, resulting in a strong physically crosslinking like interaction in the melt. On the other hand, the interaction between EMA and clay is weak because of repulsion between carboxyl anions and negatively charged clay surface.     

Acceleration or retardation to crystallization if liquid-liquid phase separation occurs: Studies on a polyolefin blend by SAXS/WAXD, DSC and TEM

Blends of statistical copolymers containing ethylene/hexene (PEH) and ethylene/butene (PEB) exhibited the behavior of upper critical solution temperature (UCST). The interplay between the early and intermediate stage liquid-liquid phase separation (LLPS) and crystallization of the PEH/PEB 50/50 blend was studied by time-resolved simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) techniques. Samples were treated by two different quench procedures: in single quench, the sample was directly quenched from 160 °C to isothermal crystallization temperature of 114 °C; while in double quench, the sample was firstly quenched to 130 °C for 20 min annealing, where LLPS occurred, and then to 114 °C. It was found that in the early stage of crystallization, the integrated values of Iq² and crystallinity, X_c, in the double quench procedure were consistently higher than those in the single quench procedure, which could be attributed to accelerated nucleation induced by enhanced concentration fluctuations and interfacial tension. In the late stage of crystallization, some morphological parameters were found to crossover and then reverse, which could be explained by retardation of lamellar growth due to phase separation formed during the double quench procedure. This phenomenon was also confirmed by DSC measurements in blends of different compositions at varying isothermal crystallization temperatures. The crystal lamellar thickness determined by SAXS showed a good agreement with TEM observation. Results indicated that the early stage LLPS in the PEH/PEB blend prior to crystallization indeed dictated the resulting lamellar structures, including the average size of lamellar stack and the stack distribution. There seemed to be little variation of lamellar thickness and long period between the two quenching procedures (i.e., single quench versus double quench).     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

Flexural behavior of stratified reinforced concrete: construction,testing, analysis,and design

Stratified concrete poses a promising alternative for construction. Its fresh and hardened properties have been studied at the material level; however, structural behavior in steel reinforced specimens has not been studied. This paper focuses on the flexural behavior of eight stratified reinforced concrete (SRC) specimens representing slices from a slab or non-bearing wall. Specimens with two stratified concrete designs and three steel ratios were tested and compared to estimates from a fiber element numerical model and rectangular stress-block design methods from ACI 318 and Eurocode 2. The results suggest that SRC has similar damage modes as ordinary reinforced concrete (ORC). The fiber element model accurately estimated the measured behavior, while ACI 318 and Eurocode 2 differed from the experimental results by <25%. These prediction accuracies are similar to those for ORC. Therefore, the flexural design of SRC can be done using both fiber element and rectangular stress-block approaches.     

GraftFast Surface Engineering to Improve MOF Nanoparticles Furtiveness

Controlling the outer surface of nanometric metal–organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL‐100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF–PEG interaction is deeply investigated using high‐resolution soft X‐ray spectroscopy. Finally, a cell penetration study using the radio‐labeled antitumor agent gemcitabine monophosphate (³H‐GMP)‐loaded MIL‐100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness.