Degradation of semiconducting polymers by concentrated sunlight

A lens based sunlight concentration setup was used to accelerate the degradation of semiconducting polymers. Sunlight was collected outdoor and focused into an optical fiber bundle allowing for indoor experimental work. Photo-degradation of several polymers was studied by UV-vis absorbance spectroscopy and infra-red spectroscopy. This showed that the degradation rate is significantly increased by increasing illumination intensity. Acceleration factors exceeding 100 compared to standard 1 sun illumination were observed for solar concentration of 200 suns in the case of P3HT. A comparison between infra-red spectra of MEH-PPV degraded at 1 sun intensity and at high solar concentration only showed minor deviations in degradation mechanisms. The acceleration factor was found to vary linearly with the solar concentration. Finally, a comparison of the degradation rates at 1 sun and 100 suns was carried out in a materials study employing five different conjugated polymers relevant to polymer solar cells for which acceleration factors in the range 19-55 were obtained.     

Nonlocal PDE morphology: a generalized shock operator on graph

This paper presents an adaptation and extension of the shock filters on weighted graphs using the formalism of partial difference equations. This adaptation leads to new morphological operators that alternate between nonlocal dilation and nonlocal erosion filter type on graphs. Furthermore, this adaptation extends the shock filter applications to any data that can be represented by graphs. This approach is illustrated through image, data defined on region maps, and 3D point cloud processing.     

Morphological co-processing unit for embedded devices

This paper focuses on the development of a fully programmable morphological coprocessor for embedded devices. It is a well-known fact that the majority of morphological processing operations are composed of a (potentially large) number of sequential elementary operators. At the same time, the industrial context induces a high demand on robustness and decision liability that makes the application even more demanding. Recent stationary platforms (PC, GPU, clusters) no more represent a computational bottleneck in real-time vision or image processing applications. However, in embedded solutions such applications still hit computational limits. The morphological co-processing unit (MCPU) replies to this demand. It assembles the previously published efficient dilation/erosion units with geodesic units and ALUs to support a larger collection of morphological operations, from a simple dilation to serial filters involving a geodesic reconstruction step. The coprocessor has been integrated into an FPGA platform running a server that is able to respond to client’s requests over the ethernet. The experimental performance of the MCPU measured on a wide set of operations brings as results in orders of magnitude better than another embedded platform, built around an ARM A9 quad-core processor.     

Coupling of thermoelectric modules with a photovoltaic panel for air pre‐heating and pre‐cooling application; an annual simulation

Thermoelectric (TE) modules are possible reversible pre‐cooling and pre‐heating devices for ventilation air in buildings. In this study, the opportunity of direct coupling of TE modules with photovoltaic (PV) cells is considered. This coupling is evaluated through a numerical simulation depending on the meteorological conditions of Chambéry, Alpine region in France, and on the cooling or heating use of the TE modules, through annual energy and exergy efficiencies. For the considered conditions, TE module performances are of the same order as the ones of the vapour compression heat pumps, with a TE coefficient of performance higher than 2 for low values of input DC current. The PV–TE coupling efficiency varies between 0.096 and 0.23 over the year, with an average value of 0.157. Evolutions of the exergy effectiveness of PV and TE elements follow the same trends as the corresponding energy efficiencies but with steeper variations for the coupling exergy yield that varies between 0.004 and 0.014, with an annual average value of 0.010. The direct PV–TE coupling does not seem to be a sustainable option for the summer cooling purpose particularly. A case study with indirect coupling under a warm climate is considered and shows that the use of TE devices could be efficient in housing to ensure summer thermal comfort, but the corresponding necessary PV area would induce a high investment. Copyright © 2008 John Wiley & Sons, Ltd.     

Factors associated with carcass contamination by Campylobacter at slaughterhouse in cecal-carrier broilers

A study was conducted in 2009 to identify risk factors of Campylobacter spp. transmission from the digestive tract to the carcasses of standard broilers (slaughter age: 37 day, carcass weight: 1.3 kg on average). Counts of Campylobacter were performed on pools of 10 ceca and 10 neck-skins from 108 Campylobacter ceca-positive batches in three slaughterhouses. Technical and health data also was collected on the broilers: age, size, carcass weight (mean and standard deviation), condemnation rate, mortality rate and nature of treatment during the rearing period.Cecal counts varied from 4.8 to 10.2 log₁₀ cfu/g. In seventeen batches (15.7%), the skin count was below the detection limit. In the 91 batches with positive neck-skin test results, the counts varied from 2.0 to 5.2 log₁₀ cfu/g. Standard deviation of carcass weight, condemnation rate, slaughter rate and cecal count were significantly lower and growth rate higher in the 17 batches where neck-skin results were not detected positive. Multivariate analysis showed that batches with higher standard deviation of carcass weight were 5 to 9 fold more at risk of having detectable carcass contamination. Among the 91 positive neck-skin batches, only slaughter rate and cecal counts were found to have a significant but limited effect on the level of neck-skin contamination. As far as body weight homogeneity may be affected by disease, better health control can contribute to a reduction of the contamination of the broiler carcasses in Campylobacter carrier batches.     

Molecular absorption spectrophotometric method for the determination of phosphorus in biodiesel

A molecular absorption method is proposed for the determination of phosphorus in biodiesel. The samples are mineralized using an ashing procedure at 550 °C followed by dissolution of the residue. The analytical procedure is based on the formation of a blue molybdenum complex. 1-amino-2-naphthol-4-sulfonic acid is used as reducing agent. The method was applied to biodiesel samples prepared from soy, canola and sunflower oils and from bovine fat. The limit of detection is 0.57 mg P kg⁻¹ and the limit of quantification is 1.7 mg P kg⁻¹. The observed mean relative standard deviation is about 5%. The simplicity of the procedure added to its precision, accuracy and low cost suggest that it is an excellent option for the determination of phosphorus in biodiesel.     

A general procedure for the design of bulk acoustic wave filters

This article presents a procedure for the design of bulk acoustic wave (BAW) filters. The procedure consists of optimizing the modified Butterworth‐Van Dyke model of each resonator, considering appropriate technological parameters. The approach is demonstrated first to design a classical aluminum nitride‐based BAW filter but remains valid for other piezoelectric layers, considering either longitudinal or transverse acoustic wave coupling. The approach is finally applied to the design of a lithium niobate (LiNbO₃) BAW filter for wide‐band filtering applications. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

It has been shown many times that cosputtering low-friction coatings of molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂) with other elements can improve the structural, mechanical, and tribological properties. To achieve the lowest friction, MoS₂ or WS₂ should be doped with element(s) improving the hardness and density of the coatings. On the other hand, such elements, or their compounds, should not be present in the outermost molecular layers at the sliding interface. This article suggests that there are important differences between how MoS₂ and WS₂ coatings respond to or react with doping elements, despite the almost identical structure and behavior of the undoped materials. Two systems have been investigated by high-resolution transmission electron microscopy (HRTEM) and scanning TEM (STEM) electron energy loss spectroscopy (EELS), W-S-C-Cr and W-S-C-Ti, and showed significant amounts of oxides, which typically formed a layer just underneath the crystalline WS₂ top layer. Further, carbon was almost completely absent in the tribofilms, despite the fact that the as-deposited coatings contained as much as 40–50 at% C. An interesting observation here is that WS₂ basal planes surround or embed Fe wear particles, suggesting a relatively strong adhesion or a Fe-S chemical bonding between iron/steel and WS₂. The result of this is that the wear particles become pacified and remain in the contact as low-friction material.