The effect of nano-structured alumina coating on the bond strength of resin-modified glass ionomer cements to zirconia ceramics

The purpose of this study was to evaluate the effect of Y-TZP ceramic surface functionalization with a nano-structured alumina coating on bond strength of the resin modified glass ionomer dental cement. A total of 160 disc-shaped specimens were produced and randomly divided into two groups of 80. Half of the discs in each group received an alumina coating which was fabricated by exploiting the hydrolysis of aluminum nitride (AlN) powder. The shear bond strengths of the resin-modified glass ionomer cement FUJI+ (GC Japan) and the composite resin luting agent RelyX Unicem (3M ESPE, USA) were then studied for the coated and uncoated surfaces The SEM analyses revealed that the application of an alumina coating to the Y-TZP ceramics created a highly retentive surface for bonding. The bond strengths for the coated groups in both cements were significantly higher than the uncoated groups.     

Luminescence during anodization of magnesium alloy AZ31

In this paper, we have presented our recent investigation of luminescence during anodization of magnesium alloy AZ31 at 100 mA/cm² in water solution containing 4 g/L Na₂SiO₃·5H₂O + 4 g/L KOH. Spectral characterization of anodic luminescence (galvanoluminescence GL) showed that there are wide GL bands in the range from 375 nm to 875 nm, with three spectral peaks around 430 nm, 600 nm and 780 nm. As the anodization voltage approaches the breakdown voltage, a large number of microdischarges appear superimposed on the GL. The microdischarges characteristics above breakdown (so-called plasma electrolytic oxidation PEO) were studied using real-time imaging. The spatial density of microdischarges is the highest in the early stage of PEO, while the percentage of oxide coating area covered by active discharge sites has maximum after about 120 s from the beginning of PEO and then stays almost constant. The elements present in PEO microdischares were identified using optical emission spectroscopy technique.     

Numerical modelling of calcination reaction mechanism for cement production

Calcination is a thermo-chemical process, widely used in the cement industry, where limestone is converted by thermal decomposition into lime CaO and carbon dioxide CO₂. The focus of this paper is on the implementation and validation of the endothermic calcination reaction mechanism of limestone in a commercial finite volume based CFD code. This code is used to simulate the turbulent flow field, the temperature field, concentrations of the reactants and products, as well as the interaction of particles with the gas phase, by solving the mathematical equations, which govern these processes. For calcination, the effects of temperature, decomposition pressure, diffusion and pore efficiency were taken into account. A simple three-dimensional geometry of a pipe reactor was used for numerical simulations. To verify the accuracy of the modelling approach, the numerical predictions were compared with experimental data, yielding satisfying results and proper trends of physical parameters influencing the process.     

Stereometric analysis of nanostructured boehmite coatings synthesized by aluminum nitride powder hydrolysis

We studied the morphological properties of precipitated, nanostructured, boehmite coatings on a polished alumina surface by exploiting the aluminum nitride (AlN) powder hydrolysis at elevated temperatures. The hydrolysis tests of the 3 wt% AlN powder suspensions in the temperature range 50–90 °C were performed in order to estimate the time needed for the synthesis of the coatings. They consisted of interlocked boehmite lamellas, positioned perpendicularly to the ceramic surface, and they exhibited a strong temperature-dependent size and surface density. The aim of this research was a quantitative assessment of the as-formed boehmite coatings. Based on electron microscopy micrographs, a stereometric analysis of the as-prepared coatings was performed in order to estimate the relevant geometric parameters of the lamellas. In spite of the temperature-dependent lamellas’ size and surface density, the specific volume of the coatings was similar for all the synthesis temperatures.     

Early stages of growth of gold layers sputter deposited on glass and silicon substrates

Extremely thin gold layers were sputter deposited on glass and silicon substrates, and their thickness and morphology were studied by Rutherford backscattering (RBS) and atomic force microscopy (AFM) methods. The deposited layers change from discontinuous to continuous ones for longer deposition times. While the deposition rate on the silicon substrate is constant, nearly independent on the layer thickness, the rate on the glass substrate increases with increasing layer thickness. The observed dependence can be explained by a simple kinetic model, taking into account different sticking probabilities of gold atoms on a bare glass substrate and regions with gold coverage. Detailed analysis of the shape of the RBS gold signal shows that in the initial stages of the deposition, the gold layers on the glass substrate consist of gold islands with significantly different thicknesses. These findings were confirmed by AFM measurements, too. Gold coverage of the silicon substrate is rather homogeneous, consisting of tiny gold grains, but a pronounced worm-like structure is formed for the layer thickness at electrical continuity threshold. On the glass substrate, the gold clusters of different sizes are clearly observed. For later deposition stages, a clear tendency of the gold atoms to aggregate into larger clusters of approximately the same size is observed. At later deposition stages, gold clusters of up to 100 nm in diameter are formed.     

Lipid peroxidative damage on Cisplatin exposure and alterations in antioxidant defense system in rat kidneys: a possible protective effect of selenium

Cisplatin (Cis-diamminedichloroplatinum II, CP) is an important chemotherapeutic agent, useful in the treatment of several cancers, but with several side effects such as nephrotoxicity. The present study investigated the possible protective effect of selenium (Se) against CP-induced oxidative stress in the rat kidneys. Male Wistar albino rats were injected with a single dose of cisplatin (7 mg CP/kg b.m., i.p.) and selenium (6 mg Se/kg b.m, as Na(2)SeO(3), i.p.), alone or in combination. The obtained results showed that CP increased lipid peroxidation (LPO) and decreased reduced glutathione (GSH) concentrations, suggesting the CP-induced oxidative stress, while Se treatment reversed this change to control values. Acute intoxication of rats with CP was followed by statistically significant decreased activity of antioxidant defense enzymes: superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GSH-Px), glutathione reductase (GR) and glutathione-S-transferase (GST). Treatment with Se reversed CP-induced alterations of antioxidant defense enzyme activities and significantly prevented the CP-induced kidney damage.     

Antiproliferative and Proapoptotic Activities of Methanolic Extracts from Ligustrum vulgare L. as an Individual Treatment and in Combination with Palladium Complex

The aim of this study is to examine the growth inhibitory effects of methanolic leaf and fruit extracts of L. vulgare on HCT-116 cells over different time periods and their synergistic effect with a Pd(apox) complex. The antiproliferative activity of plant extracts alone or in combination with the Pd(apox) complex was determined using MTT cell viability assay, where the IC(50) value was used as a parameter of cytotoxicity. Results show that antiproliferative effects of L. vulgare extracts increase with extension of exposure time, with decreasing IC(50) values, except for 72 h where the IC(50) values for methanolic leaf extract were lower than for the fruit extract. The Pd(apox) complex alone had a weak antiproliferative effect, but combination with L. vulgare extracts caused stronger effects with lower IC(50) values than with L. vulgare extracts alone. The type of cell death was explored by fluorescence microscopy using the acridin orange/ethidium bromide method. Treatments with plant extracts caused typical apoptotic morphological changes in HCT-116 cells and co-treatments with Pd(apox) complex caused higher levels of apoptotic cells than treatment with plant extracts alone. The results indicate that L. vulgare is a considerable source of natural bioactive substances with antiproliferative activity on HCT-116 cells and which have a substantial synergistic effect with the Pd(apox) complex.     

The A9 Core Sequence from NRPS Adenylation Domain Is Relevant for Thioester Formation

The adenylation (A) domain in nonribosomal peptide synthetases catalyses a two-step reaction in which an amino acid is activated and then transferred to the neighbouring thiolation (T) domain. In this study, we investigated the role of the conserved A9 core sequence of the A-domain of tyrocidine synthetase 1, by analysis of single amino acid mutations in the A9 region. Mutation of an absolutely conserved proline (P490G) significantly reduced the conformational stability of the protein, as evidenced by increased susceptibility to proteolytic cleavage and denaturation. All mutant A-domains were capable of amino acid activation, but the activity in the overall reaction was reduced. Surprisingly, the S491R mutant (mutation at the first residue following the A9 motif) showed elevated overall activity compared to the wild-type protein. Our results suggest that the A9 core sequence plays a role in the second reaction step, in which it could serve as a "clip" for the proper positioning of residues important for the interaction with the T-domain, and/or stabilisation of the thioester-forming conformation.     

The comparative study of biocomposites based on hydrochar and chitosan-modified urea-formaldehyde resins

To provide new insight into the field of urea-formaldehyde (UF) adhesives science, in this work, for the first time, UF resin was modified with hydrochar of spent mushroom substrate (HCUF) and chitosan (CHUF) to investigate the effect of these bio-fillers on the hydrolytic and thermal stability of in situ prepared UF resins. The characterization of the modified UF biocomposites was performed using X-ray diffraction analysis (XRD), Fourier transforms infrared spectroscopy (FTIR), non-isothermal thermogravimetric analysis (TG), differential thermal gravimetry (DTG), and differential thermal analysis (DTA). Scanning electron micrographs (SEM) of the CHUF and HCUF biocomposites show a spherical structure that differs from each other because the surface of the CHUF biocomposite has pronounced pores that form a network structure. With its hydroxyl and amino groups, chitosan bonding to UF resin through hydrogen bonds, which is confirmed by FTIR analysis. The content of free FA in CHUF biocomposite is 0.06%, while that of HCUF is higher and amounts to 0.48%. The content of released FA in both modified UF biocomposites was similar (2.5% and 2.8% for CHUF and HCUF, respectively). The hydrolytic stability of CHUF is slightly higher compared to the HCUF biocomposite. Thermal analysis shows that the CHUF is thermally more stable because it starts to decompose at a slightly higher temperature than the HCUF biocomposite.