Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

The Effect of Sulfur Segregation on the Adherence of the Thermally-Grown Oxide on NiAl—I: Sulfur Segregation on the Metallic Surface of NiAl(001) Single-Crystals and at NiAl(001)/Al2O3 Interfaces

The aim of this study was to improve the understanding of the deleterious effect of sulfur impurities on the adherence of the thermally-grown oxide on the boundary layer in thermal-barrier-coating systems. In Part I, the sulfur segregation on the free surface of NiAl(001) and at different interfaces between metal and transient alumina scales has been characterized by AES, XPS and LEED. The sulfur diffusion coefficient in the alloy has been determined (D = 0.15 exp(–218,000/RT) cm²/s). It is by three orders of magnitude larger than the nickel and aluminum self-diffusion coefficients. It has also been observed that the sulfur de-segregates upon Al enrichment of the metallic surface. The saturation of the metallic surface with an amorphous alumina layer formed at room temperature blocks the segregation of S. However, in the initial stages of oxidation where the transient -alumina grows by cationic transport and inject vacancies at the interface, S segregates at the interface between the alumina thin films and the metallic substrate.     

The damping performance of aluminum-based composites

Metal-matrix composites may offer better damping properties than unreinforced alloys. Because damping properties (and metal-matrix composites) are becoming important in airframe design, the damping capabilities of a number of aluminum-matrix composites were measured over a wide range of frequencies at low strain amplitudes, using a new laser vibrometer technique. Silicon carbide and alumina reinforcements resulted in a material with damping properties similar to that of unreinforced aluminum 6061-T6, but unidirectional and planar-random graphite continuous-fiber reinforcements increased the damping by 5 and 14 times, respectively. The increased damping of the continuous fiber composites is attributed to the absence of interfacial reaction resulting from the high-pressure infiltration method used for their manufacture.     

NH_3 Plasma Surface Treatments of Engineering Fluoropolymers: A Way to Enhance Adhesion of Ni or Cu Thin Films Deposited by Electroless Plating

FLUOROPOLYMERS(FPs)are thermoplasticmaterials which exhibit a number of unique chemicaland physical characteristics that no other man-madeplastic product gets together.For example,FPs showvery good resistance to almost all chemicals,excellentwater vapor barrier properties,high thermal stability,outstanding electrical insulation properties(lowdielectric constant and dissipation factors),extremelylow frictional coefficient giving them high auto-lubrication properties,high resistance to rad…     

Towards high accuracy calibration of electron backscatter diffraction systems

For precise orientation and strain measurements, advanced Electron Backscatter Diffraction (EBSD) techniques require both accurate calibration and reproducible measurement of the system geometry. In many cases the pattern centre (PC) needs to be determined to sub-pixel accuracy. The mechanical insertion/retraction, through the Scanning Electron Microscope (SEM) chamber wall, of the electron sensitive part of modern EBSD detectors also causes alignment and positioning problems and requires frequent monitoring of the PC. Optical alignment and lens distortion issues within the scintillator, lens and charge-coupled device (CCD) camera combination of an EBSD detector need accurate measurement for each individual EBSD system.This paper highlights and quantifies these issues and demonstrates the determination of the pattern centre using a novel shadow-casting technique with a precision of ∼10 μm or ∼1/3 CCD pixel.     

Ultraviolet photodetectors and readout based on a-IGZO semiconductor technology

In this work, real-time ultraviolet photodetectors are realized through metal–semiconductor–metal (MSM) structures. Amorphous indium gallium zinc oxide (a-IGZO) is used as semiconductor material and gold as metal electrodes. The readout of an individual sensor is implemented by a transimpedance amplifier (TIA) consisting of an all-enhancement a-IGZO thin-film transistor (TFT) operational amplifier and a switched capacitor (SC) as feedback resistance. The photosensor and the transimpedance amplifier are both manufactured on glass substrates. The measured photosensor possesses a high responsivity R , a low response time t _{R E S} , and a good noise equivalent power value NEP .     

Lateral Magnetically Modulated Multilayers by Combining Ion Implantation and Lithography

The combination of lithography and ion implantation is demonstrated to be a suitable method to prepare lateral multilayers. A laterally, compositionally, and magnetically modulated microscale pattern consisting of alternating Co (1.6 µm wide) and Co‐CoO (2.4 µm wide) lines has been obtained by oxygen ion implantation into a lithographically masked Au‐sandwiched Co thin film. Magnetoresistance along the lines (i.e., current and applied magnetic field are parallel to the lines) reveals an effective positive giant magnetoresistance (GMR) behavior at room temperature. Conversely, anisotropic magnetoresistance and GMR contributions are distinguished at low temperature (i.e., 10 K) since the O‐implanted areas become exchange coupled. This planar GMR is principally ascribed to the spatial modulation of coercivity in a spring‐magnet‐type configuration, which results in 180° Néel extrinsic domain walls at the Co/Co‐CoO interfaces. The versatility, in terms of pattern size, morphology, and composition adjustment, of this method offers a unique route to fabricate planar systems for, among others, spintronic research and applications.     

Solid-state 2H NMR study of methyl-d3-cobalamin

A solid-state 2H NMR study of methyl-d3-cobalamin has been performed as a function of temperature to provide information concerning the character and energetics of the motion performed by this unique bioorganometallic methyl group. Analysis of the 2H NMR line shape indicates that the methyl group undergoes rapid three-fold rotation, and that the Co-C-2H angle lies between 105.9 and 109.5 degrees. Determination of the spin-lattice relaxation times T1 shows that the relaxation is anisotropic, consistent with a "jumping" motion of the methyl group rather than rotational diffusion. This also provides the activation energy to methyl jumps as 8.3 +/- 1.3 kJ/mol. It is proposed that this energetic barrier may be a useful probe of changes in the electronic character of the Co-C bond that accompany the biological role of this molecule in such enzymes as methionine synthase.