Development of Polymer Network of Phenolic and Epoxies Resins Mixed with Linseed Oil: Pilot Study

Epoxy resin was mixed with phenolic resins in different percentages by weight. Composite 40/60 means the proportion by weight of epoxy resin is 40%. It was found that only composites 50/50 and 40/60 could be cured in ambient conditions. Dynamic mechanical analysis showed that only these two composites form interpenetrating polymer network. The addition of linseed oil to the two resins results also in the formation of interpenetrating network irrespective of proportion by weight of the resins; the mechanical properties will only be better when the percentage by weight of epoxy resin is higher; the aim of reducing cost and at the same time maintaining the mechanical properties cannot be fully achieved because epoxy resin is much more expensive than its counterpart.     

Anthocyanin composition in aged Chilean Cabernet Sauvignon red wines

Anthocyanins in aged Cabernet Sauvignon red wines were studied by HPLC–MS. The major anthocyanin in 6, 7, and 8 year old red wine extracts was the dimer vitisin A produced by condensation of malvidin-3-O-glucoside mediated by pyruvic acid. In aged wine, the content of malvidin-3-O-glucoside decreased with age with a concomitant increase of vitisin A. The latter is accompanied by several condensation products with molecular weight up to 1500 m/z. Differential pulse voltammetry indicated that aged wines have lower antioxidant capacity than young wine (400 mV), but higher than malvidin-3-O-glucoside (483 mV). Tafel’s plots showed that the electrochemical process occurring in aged wines is different from young wines. Six, seven and eight year old wines show similar behaviour with plots of 234, 177 and 188 mV/dec, respectively. These values are higher than the expected 120 mV/dec corresponding to a first electronic transfer but smaller compared to the 523 mV/dec corresponding to young wine.     

Sustained release of potassium diclofenac from a pH‐responsive hydrogel based on gum arabic conjugates into simulated intestinal fluid

This work describes the preparation, the swelling properties and the potassium diclofenac (KDF) release profile of hydrogels of gum arabic (GA), N′,N′‐dimethylacrylamide, and methacrylic acid. In order to convert GA into a hydrogel, the polysaccharide was vinyl‐modified with glycidyl methacrylate. The hydrogels showed pH‐responsive swelling changes, which were more expressive in the basic environment. Release data of KDF were adjusted to a diffusion‐based kinetic model that provides an important insight on affinity of the drug for hydrogel and solvent, which may be the leading parameter for release of guest molecules from polymers. The KDF release from the hydrogels into simulated intestinal fluid decreases when the amount of modified GA increases. This was demonstrated to be due to the higher affinity of KDF for GA‐richer hydrogel, which makes the anti‐inflammatory release less favorable. The analysis of released drug half‐time (t_1/2 = 16.10 and 21.51 h) indicated sustained release characteristics. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43319.     

Metformin Reduces Lipogenesis Markers in Obese Mice Fed a Low-Carbohydrate and High-Fat Diet

Lipogenesis is the process by which fatty acids are synthesized. In metabolic syndrome, an insulin resistant state along with high plasma levels of free fatty acids (FFA) and hyperglycemia may contribute to the lipogenic process. The aim of the present study was to investigate the effects of oral administration of metformin on the expression of lipogenic genes and glycemic profile in mice fed with low‐carbohydrate high‐fat diet by evaluating their metabolic profile. SWISS male mice were divided into 4 groups (N = 7) that were fed with standard (ST), standard plus metformin (ST + MET), low‐carbohydrate high‐fat diet (LCHFD) and low‐carbohydrate high‐fat diet plus metformin (LCHFD + MET) (100 mg kg^?1 diet) diets respectively. Food intake, body weight and blood parameters, such as glucose tolerance, insulin sensitivity, glucose, HDL‐c, total cholesterol, triglycerides, ASL and ALT levels were assessed. Histological analyses were performed on hematoxylin and eosin‐stained epididymal adipose tissue histological specimens. The expression levels of peroxisome proliferator‐activated receptor (PPARγ), sterol regulatory element‐binding protein 1 (SREBP1), fatty acid synthase (FAS) and acetyl‐CoA carboxylase (ACC), were assessed by RT‐PCR. This study showed that metformin decreased adipocyte area, body weight and food consumption in obese animals when compared to the standard group. Furthermore, the expression of lipogenic markers in adipose tissue were diminished in obese animals treated with metformin. This data showed that oral administration of metformin improved glucose and lipid metabolic parameters in white adipose tissue by reducing the expression of lipogenesis markers, suggesting an important clinical application of MET in treating obesity‐related diseases in metabolic syndrome.     

Design and realization of transparent solar modules based on luminescent solar concentrators integrating nanostructured photonic crystals

Herein, we present a prototype of a photovoltaic module that combines a luminescent solar concentrator integrating one‐dimensional photonic crystals and in‐plane CuInGaSe₂ (CIGS) solar cells. Highly uniform and wide‐area nanostructured multilayers with photonic crystal properties were deposited by a cost‐efficient and scalable liquid processing amenable to large‐scale fabrication. Their role is to both maximize light absorption in the targeted spectral range, determined by the fluorophore employed, and minimize losses caused by emission at angles within the escape cone of the planar concentrator. From a structural perspective, the porous nature of the layers facilitates the integration with the thermoplastic polymers typically used to encapsulate and seal these modules. Judicious design of the module geometry, as well as of the optical properties of the dielectric mirrors employed, allows optimizing light guiding and hence photovoltaic performance while preserving a great deal of transparency. Optimized in‐plane designs like the one herein proposed are of relevance for building integrated photovoltaics, as ease of fabrication, long‐term stability and improved performance are simultaneously achieved. © 2015 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.     

Synthesis and analysis of phase segregation of polystyrene-block-poly(methyl methacrylate) copolymer obtained by Steglich esterification from semitelechelic blocks of polystyrene and poly(methyl methacrylate)

Here, an alternative route to successfully synthesize polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) is reported. Steglich esterification was used as an effective, metal free approach for coupling carboxylic terminated PS and the hydroxyl end-functionalized PMMA chains obtained by nitroxide-mediated polymerization and atom transfer radical polymerization, respectively. α-Functionalization was obtained using 4,4′-azobis(4-cyanovaleric acid) and 2,2,2-tribromoethanol as initiators. The synthesis of PS-b-PMMA was confirmed by gel permeation chromatography and nuclear magnetic resonance (NMR), while the dependence of the diffusion coefficients of the polymers (PS, PMMA, PS/PMMA blend, and PS-b-PMMA) with their corresponding molecular weights was discussed based on the results of atomic force microscopy-based infrared spectroscopy, differential scanning calorimetry, and spectra of diffusion-ordered NMR spectroscopy. Differently from PS-b-PMMA, a partial segregation was observed for the PS/PMMA blend, affecting its thermal behavior and diffusion coefficient. The study here presented provides an easier and efficient strategy for the synthesis of PS-b-PMMA and new insights into the diffusion of polymers.     

Inactivation of Escherichia coli O157:H7 and Salmonella spp. on alfalfa seeds by caprylic acid and monocaprylin

Alfalfa and other seed sprouts have been implicated in several Escherichia coli O157:H7 and Salmonella spp. human illness outbreaks in the U.S. Continuing food safety issues with alfalfa seeds necessitate the need for discovery and use of novel and effective antimicrobials. The potential use of caprylic acid (CA) and monocaprylin (MC) for reducing E. coli O157:H7 and Salmonella spp. populations on alfalfa seeds was evaluated. The effectiveness of three concentrations of CA and MC (25, 50, and 75 mM) to reduce E. coli O157:H7 and Salmonella spp. populations in 0.1% peptone water and on alfalfa seeds was evaluated. Surviving populations of E. coli O157:H7 and Salmonella spp. were enumerated by direct plating on tryptic soy agar (TSA). Non-inoculated alfalfa seeds were soaked for up to 120 min to evaluate the effect of CA and MC solutions on seed germination rate. For planktonic cells, the efficacy of the treatments was: 75 MC > 50 MC > 25 MC > 75 CA > 50 CA > 25 CA. Both E. coli O157:H7 and Salmonella spp. were reduced to below the detection limit (0.6 log CFU/ml) within 10 min of exposure to 75 MC from initial populations of 7.65 ± 0.10 log CFU/ml and 7.71 ± 0.11 log CFU/ml, respectively. Maximum reductions of 1.56 ± 0.25 and 2.56 ± 0.17 log CFU/g for E. coli O157:H7 and Salmonella spp., respectively, were achieved on inoculated alfalfa seeds (from initial populations of 4.74 ± 0.62 log CFU/g and 5.27 ± 0.20 log CFU/g, respectively) when treated with 75 MC for 90 min. Germination rates of CA or MC treated seeds ranged from 84% to 99%. The germination rates of CA or MC soaked seeds and water soaked seeds (control) were similar (P > 0.05) for soaking times of ≤ 90 min. Monocaprylin (75 mM) can be used to reduce E. coli O157:H7 and Salmonella spp. on alfalfa seeds without compromising seed viability.     

Mesostructured Thin Films as Responsive Optical Coatings of Photonic Crystals

A synthetic route is presented to attain high‐optical‐quality multilayered structures that result from coupling ordered mesoporous titanium oxide thin films to the surface of a dense one‐dimensional photonic crystal. Such architectures present spectrally well‐defined photon resonant modes localized in the outer coating that finely respond to physicochemically induced modifications of its pore volume. The potential of these porous coatings in detection of environmental changes through variations of the photonic response of the ensemble is demonstrated by performing isothermal optical reflectance measurements under controlled vapor‐pressure conditions.