Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

Homozygous parent affected sib pair method for detecting disease predisposing variants: application to insulin dependent diabetes mellitus

For complex genetic diseases involving incomplete penetrance, genetic heterogeneity, and multiple disease genes, it is often difficult to determine the molecular variant(s) responsible for the disease pathogenesis. Linkage and association studies may help identify genetic regions and molecular variants suspected of being directly responsible for disease predisposition or protection, but, especially for complex diseases, they are less useful for determining when a predisposing molecular variant has been identified. In this paper, we expand upon the simple concept that if a genetic factor predisposing to disease has been fully identified, then a parent homozygous for this factor should transmit either of his/her copies at random to any affected children. Closely linked markers are used to determine identity by descent values in affected sib pairs from a parent homozygous for a putative disease predisposing factor. The expected deviation of haplotype sharing from 50%, when not all haplotypes carrying this factor are in fact equally predisposing, has been algebraically determined for a single locus general disease model. Equations to determine expected sharing for multiple disease alleles or multiple disease locus models have been formulated. The recessive case is in practice limiting and therefore can be used to estimate the maximum proportion of putative susceptibility haplotypes which are in fact predisposing to disease when the mode of inheritance of a disease is unknown. This method has been applied to 27 DR3/DR3 parents and 50 DR4/DR4 parents who have at least 2 children affected with insulin dependent diabetes mellitus (IDDM). The transmission of both DR3 and DR4 haplotypes is statistically different from 50% (P < 0.05 and P < 0.001, respectively). An upper estimate for the proportion of DR3 haplotypes associated with a high IDDM susceptibility is 49%, and for DR4 haplotypes 38%. Our results show that the joint presence of non-Asp at DQ beta position 57 and Arg at DQ alpha position 52, which has been proposed as a strong IDDM predisposing factor, is insufficient to explain the HLA component of IDDM predisposition.     

A zero-voltage and zero-current switching three-level DC/DC converter

This paper presents a novel zero-voltage and zero-current switching (ZVZCS) three-level DC/DC converter. This converter overcomes the drawbacks presented by the conventional zero-voltage switching (ZVS) three-level converter, such as high circulating energy, severe parasitic ringing on the rectifier diodes, and limited ZVS load range for the inner switches. The converter presented in this paper uses a phase-shift control with a flying capacitor in the primary side to achieve ZVS for the outer switches. Additionally, the converter uses an auxiliary circuit to reset the primary current during the freewheeling stage to achieve zero-current switching (ZCS) for the inner switches. The principle of operation and the DC characteristics of the new converter are analyzed and verified on a 6 kW, 100 kHz experimental prototype.     

Computer-controlled ion-selective electrode switch

The construction of a microcomputer-controlled electrode switch for use in potentiometric determinations is described. This can be coupled to most of the analytical equipment usually found in laboratories, to enable a setting up of automatic systems capable of performing sequential determinations with several ion-selective electrodes. The assessment of its analytical usage and behaviour are discussed.     

Synthesis and characterization of binders

This paper presents an academic analysis of recent progress and changes in polymer science. These changes influence the coatings industry, as an answer to various constraints, such as enhanced applicability, quality certification, safety, and care of environment. We do not focus on a specific topic but instead consider the basic concepts, the chemical advances in polymer synthesis, and progress in fine characterization methods. Experimental results in polymerization, analysis, and new processes, obtained in recent years, in the final period of my laboratory activity, are illustrated. Presented at the 79th Annual Meeting of the Federation of Societies for Coatings Technology, in Atlanta, GA, Nov. 5–7, 2001. 200 Avenue Félix Faure, F-69003-Lyon, LMOPS, 69390 Vernaison on behalf of AFTPVA, France, email: arevillon@gonline.fr.     

Multihour engineering and traffic routing optimization in hierarchical telephone networks

Classical hierarchical routing in telephone networks is extended to a wider class called out-of-chain routing in such a way that some useful properties of hierarchical routing are retained. This new routing pattern offers more potential paths than the fixed hierarchical one and can be introduced as a dynamic routing where the fixed alternate sequences change at some predetermined instants during the day. The effect of this new routing pattern on the network performances is examined. The main topic of this paper is to present heuristic methods used to optimise such routings in large networks. We show on artificial networks that the throughput of a given network can be significantly improved by suitable routing choices. We demonstrate that the integration of routing changes within a multihour dimensioning process is possible but the lack of realistic data does not permit at this time to quantify the value of routing optimization on real networks.     

Gamma-Ray-Induced Multi-Effect on Properties of Chalcogenide Glasses

Gamma-ray irradiations induced various alterations in sulfur- and selenium-based chalcogenide glasses. The absorbed dose was in the range of 0.01–3.6 MGy. The glasses exhibit prominent sensitivity to γ-ray irradiation, characterized by changes in some of the physical properties of the glasses, e.g., optical transmission, optical band gap, density, and thermal expansion coefficient. The effects on glass structure and microscopic morphology were also studied by Raman spectra and scanning electron microscopic observations.