Synthesis and characterization of aniline copolymers containing carboxylic groups and their application as sensitizer and hole conductor in solar cells

Copolymers of m-aminobenzoic acid and o-anisidine doped with p-toluenesulphonic acid in different proportions were successfully synthesized by oxidative polymerization. The copolymers were characterized by FT-IR, UV–vis, ¹H NMR and EPR spectroscopies, cyclic voltammetry, conductivity and SEM. The copolymer with equivalent amounts of the monomers o-anisidine and m-aminobenzoic acid presented the highest conductivity, The EPR analyses and SEM images show that this copolymer provides more homogeneous films with particle size distribution of approximately 1–2 μm. The copolymer with a high fraction of o-anisidine gives rises to films with larger particle sizes and a more defined electrochemical process. The m-aminobenzoic acid monomer was intentionally chosen in order to promote a better electronic coupling between the conducting copolymer and the TiO₂ surface. The copolymers were tested as both sensitizers and hole conducting materials in dye-sensitized solar cells. The device assembled using the copolymer with the highest proportion of m-aminobenzoic acid units as sensitizer produced the highest photocurrent (I_sc = 0.254 mA cm^?2) and photovoltage (V_oc = 0.252 V) at 100 mW cm^?2. The energy diagram shows that although the electronic injection from the conducting polymer excited state is an allowed process the regeneration of the positive charges created after the electron transfer process is forbidden, thus explaining the low efficiency of solar energy conversion. When this copolymer was applied as a hole conducting material, an improvement in the V_oc to 0.4 V, was observed, indicating that this material is more suitable for charge transport when applied in this type of solar cells.     

Absolute emission quantum yield determination of self-assembled mesoporous titania films grafted with a luminescent zinc complex

A luminescent zinc complex was successfully incorporated to mesostructured porous titania films through a grafting process. The resulting films show an intense blue-emission increasing with functionalization time. The emission quantum yield of these newly synthesized films was quantitatively and accurately determined by measurements carried by an integrating sphere.     

New insights on the consolidation of salt weathered limestone: the case study of Modica stone

Bulletin of Engineering Geology and the Environment - The deterioration of a stone material is related to its pore structure, which affects the interaction between surface and environmental agents....     

The behaviour of consolidated Neapolitan yellow Tuff against salt weathering

Bulletin of Engineering Geology and the Environment - Salt crystallization is a strong weathering agent in porous building materials. The crystallization pressure exerted by salt crystals, growing...     

Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.     

Novel Procedure for Lager Beer Clarification and Stabilization Using Sequential Enzymatic,Centrifugal, Regenerable PVPP and Crossflow Microfiltration Processing

In this work, the crossflow microfiltration (CFMF) performance of different lots of lager beer, produced in a pilot scale at the Italian Brewing Research Centre (CERB, Perugia, Italy), was assessed in a bench-top plant, equipped with a 0.8-μm ceramic tubular membrane module, under constant crossflow velocity of 6 m s^?1, transmembrane pressure difference of 3.74 bar, temperature of ~10 °C, and periodic CO₂ backflushing. By feeding different beer samples (i.e., as such, precentrifuged (C), or pretreated with a commercial enzyme preparation to degrade the original arabinoxylans and β-glucans and then centrifuged (EC) to minimize the fouling contribution of yeast cells, aggregates, and polysaccharides), it was possible to increase the average permeation flux (expressed as mean value?±?standard deviation) from 112?±?13 to 199?±?17 or 330?±?22 L m^?2 h^?1, respectively. Only when using the EC-pretreated beer specimens, the permeate turbidity at 20 °C approached the limiting one (<0.6 EBC unit) recommended by the European Brewery Convention standards. As expected, the permeate chill haze at 0 °C was generally higher than the above haze target. By submitting EC-pretreated beer seeded with 0.5 g L^?1 of regenerable polyvinylpolypyrrolidone (PVPP) to CFMF, it was possible to reduce the initial total polyphenol content by 30 % and permeate chill haze to 0.60?±?0.01 EBC unit, but the average permeation flux fell to 84?±?4 L m^?2 h^?1. By performing sequentially EC pretreatments, PVPP stabilization, cartridge filtration, and CFMF, it was possible not only to re-enhance the average permeation flux at about 230 L m^?2 h^?1 near to those achievable with DE filters, but also to obtain a chill haze-free permeate ready for aseptic packaging.     

Investigation of the piroxicam/hydroxypropyl-β-cyclodextrin inclusion complexation by means of a supercritical solvent in the presence of auxiliary agents

The complexation of piroxicam and 2-hydroxypropyl-β-cyclodextrin by means of supercritical CO₂ has been investigated. The experiments were carried out by varying the temperature, pressure and contact time and introducing two different auxiliary agents: polyvinyl pyrrolidone or l-lysine.Cyclodextrins, which are widely used to solubilize a large variety of poorly soluble drugs, are often used in combination with some auxiliary agents to enhance the complexation efficiency of the conventional techniques. While many recent literature works report that supercritical carbon dioxide is a clean, non-toxic alternative to organic solvents, the use of auxiliary agents in the supercritical complexation process has been scarcely examined and still needs to be investigated.The inclusion complexes obtained in this work were analysed by means of the ‘differential solubility method’, differential scanning calorimetry and Fourier transform infrared spectroscopy. The results showed that the supercritical treatment could be successfully employed below 140-150 °C without incurring thermal degradation of the samples. While 66% inclusion efficiency could be obtained at 140 °C and 30 MPa for a mixture of piroxicam/2-hydroxypropyl-β-cyclodextrin (1:2 molar ratio), higher percentages of complexation (95% in the ternary samples with polyvinyl pyrrolidone and 89-91% in those with l-lysine) could be obtained at a lower temperature (130 °C) when auxiliary agents were employed.     

Zinc‐based compounds as smoke suppressant agents for an aerospace epoxy matrix

Smoke is considered to be the main hazard of fires involving epoxy resins but its production depends on many variables, principally the chemical character and the burning rate of the polymer plus the availability of oxygen. The work reported aimed to study the smoke suppressant effect and flammability performance of zinc‐based compounds (FR system) in epoxy matrix composites used in the aerospace and aeronautical industry. The flammability performance of neat and FR‐loaded systems was screened using microcombustion calorimetry, while smoke generation, in terms of carbon monoxide (CO) and carbon dioxide (CO₂) production, was analysed under dynamic conditions using cone calorimetry. Final results indicate that the dispersion of zinc borate and zinc hydroxystannate (ZHS) into epoxy matrices leads to a significant variation in flame retardant properties reducing both total heat release by about 25 and 30%, respectively, and heat release capacity by about 30 and 50%, respectively. The system containing ZHS shows an enhancement in all smoke suppressant properties; both tin compounds (zinc stannate (ZS) and ZHS) give a reduction of CO₂/CO ratio from 41 to 25 for ZS and from 41 to 36 for ZHS compared to neat matrix. Copyright © 2010 Society of Chemical Industry     

Robocast zirconia-toughened alumina scaffolds: Processing,structural characterisation and interaction with human primary osteoblasts

Zirconia-toughened alumina (ZTA) is the gold-standard ceramic in hip arthroplasty, but still lacks direct osseointegration and a metal shell, often coated with a bioactive layer, is currently required. The latter could potentially be replaced by a thinner, architectured ZTA layer, thereby allowing for larger acetabular components, with larger range of motion and lower dislocation risk. Robocasting may be an adequate technique to fabricate the architectured layer. Therefore, as a first step, this study aimed to produce ZTA scaffolds (3D-ZTA) by robocasting and assess their in vitro response. Shape retention was achieved by using a stable, well-dispersed, high solid loading ink injected in acid pH waterbath. 3D-ZTA exhibit regularly spaced microporous, rough struts and fully interconnected macroporosity. Human primary osteoblasts were homogenously distributed inside 3D-ZTA and showed increased osteogenic marker expression compared to 2D-ZTA control. Further work will focus on optimizing scaffold design to improve cell retention and extracellular matrix maturation.