Toluene degradation by a water/silicone oil mixture for the design of two phase partitioning bioreactors

Toluene degradation performances were studied in a 10 L Two-Phase Partitioning Bioreactor (TPPB).The liquid phase consisted of a mixture of water and PDMS 50 (PolyDiMethylSiloxane,i.e.silicone oil,viscosity of 46 maa·s) in the volume ratio of 75％/25％.Two series of experiments were carried out:in the first,the reactor was sequentially supplied with toluene whereas in the second,toluene was continuously supplied.Activated sludge from the wastewater treatment plant of Beaurade (Rennes,France) was used at an initial concentration of 0.5 dry mass g· (mixture L)-1.The elimination capacity (EC) was investigated as well as the change in biomass concentration over time.Toluene biodegradation was very efficient (removal efficiency,RE =100％) for toluene flows ranging from 0.2 to 1.2 ml· h-1,corresponding to elimination capacities of up to 104 g· m-3· h-1.For a toluene flow of 1.2 ml·h-1,the biomass concentration measured at the end of the experiment was 4.7 dry mass g.(mixture L)-1.The oxygen concentration in the liquid phase was clearly not a limiting factor in these operating conditions.Based on these results,an extrapolation leading to the design of a large-scale pilot TPPB can now be considered to study toluene degradation performances in industrial conditions.     

Denitrification en continu a l'aide de microorganismes immobilises sur des supports solides

In this paper, we describe a study of biological denitrification by immobilized cells. Nitrates are reduced in sterile solutions by Pseudomonas aeruginosa immobilized in a fixed bed reactor, and in synthetic waste water by mixed cultures immobilized into a fluidized bed reactor.The fixed bed reactor is a Plexiglas column filled with corn stovers (Table 1). It is 0.05 m in diameter and 0.55 in height, its volume being approx. 11. The fresh medium is injected at the base of the column and the liquid level is regulated by an overflow weir. Reactor and carrier are sterilized with ethylene-oxide. After sterilization 1 l. of a growing batch culture of Pseudomonas aeruginosa is introduced aseptically and the reactor is then fed continuously (45 ml h⁻¹) with fresh medium (N---NO₃ = 40 mg l⁻¹) until the first steady state is reached.Nitrates and nitrites are determinated by means of a colorimetric method.Reactor efficiency remains constant for over 40 days. Nitrates and nitrites concentrations are measured inside the reactor for flow varying from 2 to 16 ml min⁻¹ (Fig. 2). Reductions of nitrates and nitrites seem to be two first-order reactions (Fig. 3 and Table 2) and constant rate increases with flow rate (Fig. 4). Until nitrate concentration reaches 960 mg/l⁻¹ (N---NO₃) degradation is correct (Figs 5 and 6), beyond nitrites, which have been formed, seem to be inhibitor.Using this reactor, 50 mg N---NO₃ have been reduced per hour and per liter of empty reactor, but it may be possible to reduce 140 mg N---NO₃ l⁻¹ h⁻¹ if fresh medium contains 200 mg N---NO₃ l⁻¹.The fluidized bed reactor is a Plexiglas column filled with earthenware. It is 0.05 m in diameter and 3.15 m in height, its volume being approx. 6.201. Fresh medium is injected at the base of the column and the liquid level is regulated by an overflow weir. Figure 7 shows the retention time of the liquid in the reactor in relation to flow. The first steady state has been reached after 2 weeks, and it has not been possible to know half life time of the column.Four experiments were conducted (Table 3) and, for each nitrate, nitrite and methanol concentrations in the reactor were measured (Fig. 8). So, it appears that reduction of nitrates and nitrites are two first-order reactions (Table 4) and that constant rate values, which are higher than in fixed bed reactor, increase with flow.The reactor is more affected by a flow shift than by a nitrate concentration shift in fresh medium, and biomass linked onto carrier is about 76 mg of dry matter g⁻¹ of earthenware.So, our fluidized bed column is able to reduce 560 mg N---NO₃ h⁻¹ l⁻¹ of empty reactor, then retention time of liquid is less than 3 min.     

Greffage de molécules à la surface du silicium par voie électrochimique

The hydrogentated surface of silicon exhibits remarkable properties, but poor resistance to oxidation. To improve its stability, surface hydrogen has been replaced by several organic groups. Such grafting can be carried out chemically by a multi-step reaction scheme. However, an electrochemical approach allows direct reaction with the hydrogenated surface. The porous-silicon surface has been partially methoxylated by a controlled anodic dissolution. If has also been methylated using a non-destructive anodic process, with a yield of 80%, limited only by steric hindrance. The methylated surface of porous silicon exhibits a stability against oxidation increased by an order of magnitude.     

Morphological studies of glass-microbead-filled polyamide 6.6-polypropylene blends

This article deals with the study of the morphology of glass bead (10% in volume) reinforced compatibilized blends of polypropylene (PP) and polyamide (PA) 6.6. The morphology, as well as some physical and mechanical properties, are determined. The blends are studied in relation with the PP-PA ratio and according to the glass bead's sizing. We have seen the existence of a boundary PA-glass beads interface (independently of the sizing), and the best compatibilization effect is obtained with PP size glass beads and for 50% PP content. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 201–208, 1998     

Building maps of local apparent conductivity of the epicardium with a 2-D electrophysiological model of the heart

In this paper, we address the problem of estimating the parameters of an electrophysiological model of the heart from a set of electrical recordings. The chosen model is the reaction-diffusion model on the transmembrane potential proposed by Aliev and Panfilov. For this model of the transmembrane, we estimate a local apparent two-dimensional conductivity from a measured depolarization time distribution. First, we perform an initial adjustment including the choice of initial conditions and of a set of global parameters. We then propose a local estimation by minimizing the quadratic error between the depolarization time computed by the model and the measures. As a first step we address the problem on the epicardial surface in the case of an isotropic version of the Aliev and Panfilov model. The minimization is performed using Brent method without computing the derivative of the error. The feasibility of the approach is demonstrated on synthetic electrophysiological measurements. A proof of concept is obtained on real electrophysiological measures of normal and infarcted canine hearts.     

Development of an optimized electrochemical process for subsequent coating of 316 stainless steel for stent applications

Metallic endovascular stents are used as medical devices to scaffold biological lumen, most often diseased arteries, after balloon angioplasty. They are commonly made of 316L stainless steel or Nitinol, two alloys containing nickel, an element classified as potentially toxic and carcinogenic by the International Agency for Research on Cancer. Although they are largely implanted, the long-term safety of such metallic elements is still controversial, since the corrosion processes may lead to the release of several metallic ions, including nickel ions in diverse oxidation states. To avoid metallic ion release in the body, the strategy behind this work was to develop a process aiming the complete isolation of the stainless steel device from the body fluids by a thin, cohesive and strongly adherent coating of RF-plasma-polymerized fluoropolymer. Nevertheless, prior to the polymer film deposition, an essential aspect was the development of a pre-treatment for the metallic substrate, based on the electrochemical polishing process, aiming the removal of any fragile interlayer, including the native oxide layer and the carbon contaminated layer, in order to obtain a smooth, defect-free surface to optimize the adhesion of the plasma-deposited thin film. In this work, the optimized parameters for electropolishing, such as the duration and the temperature of the electrolysis, and the complementary acid dipping were presented and accurately discussed. Their effects on roughness as well as on the evolution of surface topography were investigated by Atomic Force Microscopy, stylus profilometry and Scanning Electron Microscopy. The modifications induced on the surface atomic concentrations were studied by X-ray Photoelectron Spectroscopy. The improvements in terms of the surface morphology after the pre-treatment were also emphasized, as well as the influence of the original stainless steel surface finish.     

Pressure control in a PEM fuel cell via second order sliding mode

Pressure difference inside the Polymer Electrolyte Membrane Fuel Cells (PEMFC) arises due to load variations, during which the pressure difference between anode and cathode rises. Practically, this problem can be avoided by equalizing anode and cathode pressures, to protect the fuel cell from permanent damage. This paper focuses on pressure regulation in the anode and cathode sides of the PEMFC. The control objective is achieved using second order sliding mode multi-input multi-output (MIMO) controller based on “Twisting algorithm”. Parametric uncertainty is formally presented and included in a nonlinear dynamic fuel cell model. The resultant nonlinear controller is robust and is proved to guarantee performance around any equilibrium point and under parametric uncertainty. Simulation results show that the proposed controller has a good transient response under load variations.     

Correction to Tremblay et al (2009).

Reports an error in "Work Extrinsic and Intrinsic Motivation Scale: Its value for organizational psychology research" by Maxime A. Tremblay, Céline M. Blanchard, Sara Taylor, Luc G. Pelletier and Martin Villeneuve (Canadian Journal of Behavioural Science/Revue canadienne des sciences du comportement, 2009[Oct], Vol 41[4], 213-226). In this article, line 2 of the second table was missing from the printed article. The correct table is reprinted in this correction. (The following abstract of the original article appeared in record 2009-18333-004.) The Work Extrinsic and Intrinsic Motivation Scale (WEIMS) is an 18-item measure of work motivation theoretically grounded in self-determination theory (Deci & Ryan, 2000). The purpose of the present research was twofold. First, the applicability of the WEIMS in different work environments was evaluated. Second, its factorial structure and psychometric properties were assessed. Two samples of workers (military: N = 465; civilians: N = 192) voluntarily completed questionnaires. Using the WEIMS’s 3 indexes (work self-determination index, work self-determined and nonself-determined motivation, respectively), results of regression analyses were supportive of its ability to predict positive and negative criteria in the workplace. Results also showed the adequacy of both its construct validity and internal consistency. Its factorial structure was also invariant across samples. Finally, its quasi-simplex pattern and relationships with psychological correlates further supported the self-determination continuum. Overall, these findings provide evidence for the applicability as well as the reliability and validity of the WEIMS in organisational settings. Results are discussed in regard to the applicability of self-determination theory to the workplace. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Large scale synthesis of single-crystal and polycrystalline boron nitride nanosheets

Boron nitride nanosheets (BNNSs) have an identical crystal structure and similar lattice parameter to those of graphene sheets. However, growing quality BNNSs consisting of only several atomic layers remains a challenge. Here, we report on the synthesis of BNNSs at a temperature of 350 °C using a CO₂ pulsed laser plasma deposition (CO₂-PLD) technique by irradiating a pyrolytic hexagonal boron nitride (h-BN) target. The deposition was performed either in vacuum at a pressure of 0.2 Pa, for which we obtained polycrystalline BN, or in hydrogen (H₂) atmosphere at a pressure of 26 Pa for which we obtained single-crystal BNNSs. The presence of H₂ seems to minimize the side effects of sputtering and the material shows higher purity and better crystallinity. High resolution transmission electron microscopy (HRTEM) showed the sheets to be mostly defect-free and to have the characteristic honeycomb structure of six-membered B₃-N₃ hexagon. HRTEM, electron diffraction, X-ray diffraction, Raman scattering, and Fourier transform infrared spectroscopy clearly identified h-BN.     

Personalization of cardiac motion and contractility from images using variational data assimilation

Personalization is a key aspect of biophysical models in order to impact clinical practice. In this paper, we propose a personalization method of electromechanical models of the heart from cine-MR images based on the adjoint method. After estimation of electrophysiological parameters, the cardiac motion is estimated based on a proactive electromechanical model. Then cardiac contractilities on two or three regions are estimated by minimizing the discrepancy between measured and simulation motion. Evaluation of the method on three patients with infarcted or dilated myocardium is provided.