Mass balance of total mercury and monomethylmercury in coastal embayments of a volcanic island: significance of submarine groundwater discharge

To understand the contribution of submarine groundwater discharge (SGD) to the coastal mass budgets of Hg and monomethylmercury (MMHg), preliminary mass balance estimates were made for Hwasun and Bangdu Bays on Jeju Island, known to have large SGD due to the high permeability of the volcanic rocks. The mass balance results indicate that SGD is a main source of Hg in Hwasun Bay (23 ± 14 × 10(-2) mol yr(-1), 34%) and Bangdu Bay (23 ± 20 × 10(-2) mol yr(-1), 67%), although the contribution from atmospheric deposition was considerable (25% for Hwasun and 23% for Bangdu). MMHg was also discharged primarily from submarine groundwater at Hwasun (0.30 ± 0.17 × 10(-2) mol yr(-1), 55%) and Bangdu (0.65 ± 0.49 × 10(-2) mol yr(-1), 64%), which was higher than atmospheric deposition (6% for Hwasun and 2% for Bangdu) and sediment diffusion flux (5% for Hwasun and 3% for Bangdu). The overall mass balance results suggest that, although there are large spatial variations in SGD rates throughout the region, the coastal mass budgets of Hg and MMHg need to include SGD as well as atmospheric deposition and sediment diffusion as primary sources of Hg and MMHg.     

Rapid Detection of Wheat Blast Pathogen Magnaporthe oryzae Triticum Pathotype Using Genome-Specific Primers and Cas12a-mediated Technology

Wheat blast, caused by the fungus Magnaporthe oryzae Triticum (MoT) pathotype, is a devastating disease persistent in South America and Bangladesh. Since MoT generally fails to cause visual symptoms in wheat until the heading stage when the infection would have advanced, disease control by fungicide application solely based on the detection of visual symptoms is ineffective. To develop an accurate and sensitive method to detect MoT at the seedling and vegetative stages for disease control, we sequenced the genomes of two MoT isolates from Brazil and identified two DNA fragments, MoT-6098 and MoT-6099, that are present in the MoT genome but not in the genome of the rice-infecting Magnaporthe oryzae Oryzae (MoO) pathotype. Using polymerase chain reaction (PCR), we confirmed the specificity of the two markers in 53 MoT and MoO isolates from South America and Bangladesh. To test the efficiency of the two markers, we first established a loop-mediated isothermal amplification (LAMP) method to detect MoT at isothermal conditions, without the use of a PCR machine. Following this, we used the Cas12a protein and guide RNAs (gRNAs) to target the MoT-6098 and MoT-6099 sequences. The activated Cas12a showed indiscriminate single-stranded deoxyribonuclease (ssDNase) activity. We then combined target-dependent Cas12a ssDNase activation with recombinase polymerase amplification (RPA) and nucleic acid lateral flow immunoassay (NALFIA) to develop a method that accurately, sensitively, and cost-effectively detects MoT-specific DNA sequences in infected wheat plants. This novel technique can be easily adapted for the rapid detection of wheat blast and other important plant diseases in the field.     

Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station

Failure investigation was carried out on boiler water wall tubes of a thermal power plant through visual inspection, chemical analysis, and metallurgical analysis. Failure was in the form of thin/micro cracks along the length of the tubes which were located at the girth welding joint of tubes. Experimental results revealed that the cracking was from inward to outward of the tube thickness. Discontinuities/cavities were observed in the welded region which might have occurred due to lack of fusion of base metal and the weld metal. Cracks were initiated from the sharp corner/crack tip of the cavities/discontinuities present at the welded region under the action of hoop/thermal stress existed during the operation. Nature of the crack propagation indicates the case of typical hydrogen-induced cracking. Moreover, the presence of the cavities/discontinuities reduced the cross-sectional area of tubes resulting increased stress intensity. Increased stress beyond the flow stress of the material assisted by hydrogen-induced effect resulted the cracking of the tubes. In order to mitigate the problem, proper welding of tubes joints should be carried out followed by proper inspection after weld. Secondly, hydrogen dissolution during welding should be prevented and treatment for its removal after welding should be carried out.     

A similarity coefficient measure and machine-parts grouping in cellular manufacturing systems

For more than three decades, similarity coefficient measures one of the important tools for solving group technology problems have gained the attention of the research community in cellular manufacturing systems. A new similarity coefficient measure that uses a set of important characteristic properties for grouping is developed here for use as an intermediate tool to form cohesive cells. A mathematical model that uses this similarity coefficient for optimally solving the cell-formation problems in cellular manufacturing is developed. A heuristic procedure that improves the optimal methodology in term of solution capability of the large instances is devised for an efficient solution. Both the optimal methodology and the heuristic are applied to some well-known problems from literature to compare the grouping efficiencies. The similarity coefficient and the solution methodologies developed are able to solve the cell formation problems efficiently.     

Probabilistic design of ground improvement by vertical drains for soil of spatially variable coefficient of consolidation

The design of soil consolidation via prefabricated vertical drains (PVDs) has been traditionally carried out deterministically and thus can be misleading due to the ignorance of the uncertainty associated with the inherent variability of soil properties. To treat such uncertainty in the course of design of soil improvement by PVDs, more rational probabilistic methods are necessary. In this paper, a simplified probabilistic method is proposed in which the inherent variability of the coefficient of consolidation, which is the most significant uncertain soil parameter that affects the consolidation process, is considered. An easy-to-use design procedure and charts are provided for routine use by practitioners.     

Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

Influence of Elevated Temperature and Stress Ratio on the Fatigue Response of AM60B Magnesium Alloy

The fatigue response of a high pressure die-cast AM60B Mg alloy is studied at room and elevated temperatures. The fatigue tests are conducted with stress ratio of R?=?0.1 and frequency of 30?Hz. The main objective is to determine whether elevated temperature would affect the fatigue response of the alloy. In addition, fatigue crack growth characteristics of the alloy is investigated at room temperature. The purpose of this test is to ascertain the capability and accuracy of a finite element approach coupled with the Walker model in assessing the life cycle of the alloy, in consideration of the influence of stress ratio.     

Radiation crosslinked polyvinyl alcohol/polyvinyl pyrrolidone/acrylic acid hydrogels: swelling,crosslinking and dye adsorption study

Iranian Polymer Journal - Hydrogels were produced from mixtures of polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP), and acrylic acid (AAc) using γ-radiation at doses of 3, 7, and...     

Microbial fuel cells for bioelectricity generation through reduction of hexavalent chromium in wastewater: A review

The study proposes the use of microbial fuel cell (MFC) technology to reduce toxic Cr(VI) present in industrial wastewater to less toxic trivalent chromium [Cr(III)], while generating electricity through a bioelectrochemical oxidation-reduction process. Factors influencing the treatment process and electricity generation include the concentration of Cr(VI) in wastewater, substrate types used for anodes, types of microorganisms involved, types of cathode and anode, surface area of the cathode and anode, and pH and temperature of cathodic and anodic solutions. While other heavy metals in wastewater may be removed by MFC technology, Cr(VI) removal is more efficient in terms of electricity generation. Previous research indicated that the maximum electrical power generated by Cr(VI) removal through the use of MFCs is 1600 mW/m², which is expected to increase as the factors affecting this process are optimized. Based on current data, MFC-based electricity generation along with Cr(VI) removal is a potential future source of sustainable energy. However, research priorities need to focus on reducing the cost of MFC technology by using economical and effective materials and increasing electricity production.     

High dielectric permittivity and percolative behavior of polyvinyl alcohol/potassium dihydrogen phosphate composites

A new kind of anhydrous, transparent, and flexible potassium dihydrogen phosphate (KH₂PO₄ or KDP)/polyvinyl alcohol (PVA) composite in the form of film (0.10 mm) has been prepared by solution casting technique. KDP is well dispersed in the polymer matrix as observed from the microstructural studies. Frequency and temperature dependent dielectric properties of the composites have been studied with varying KDP concentrations. The PVA/KDP composite films exhibited extraordinarily high relative permittivity ε′ ∼ 430 (80 times higher compared with pure PVA and even higher than KDP) near the percolation threshold (ϕ_C = 2.5 wt % KDP) with low dielectric losses (∼ 0.15) at 1 kHz and room temperature. Such flexible, low loss and high dielectric permittivity material has enormous importance for application in devices. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012