Processing map for hot working of powder

The constitutive flow behavior of a metal matrix composite (MMC) with 2124 aluminum containing 20 vol pct silicon carbide particulates under hot-working conditions in the temperature range of 300 °C to 550 °C and strain-rate range of 0.001 to 1 s^-1 has been studied using hot compression testing. Processing maps depicting the variation of the efficiency of power dissipation given by [2m/(m + 1)] (wherem is the strain-rate sensitivity of flow stress) with temperature and strain rate have been established for the MMC as well as for the matrix material. The maps have been interpreted on the basis of the Dynamic Materials Model (DMM). [3] The MMC exhibited a domain of superplasticity in the temperature range of 450 °C to 550 °C and at strain rates less than 0.1 s^-1. At 500 °C and 1 s^-1 strain rate, the MMC undergoes dynamic recrystallization (DRX), resulting in a reconstitution of microstructure. In comparison with the map for the matrix material, the DRX domain occurred at a strain rate higher by three orders of magnitude. At temperatures lower than 400 °C, the MMC exhibited dynamic recovery, while at 550 °C and 1 s^-1, cracking occurred at the prior particle boundaries (representing surfaces of the initial powder particles). The optimum temperature and strain-rate combination for billet conditioning of the MMC is 500 °C and 1 s^-1, while secondary metalworking may be done in the super- plasticity domain. The MMC undergoes microstructural instability at temperatures lower than 400 °C and strain rates higher than 0.1 s^-1.     

Components of the Complement Cascade Differ in Polycystic Ovary Syndrome

Complement pathway proteins are reported to be increased in polycystic ovary syndrome (PCOS) and may be affected by obesity and insulin resistance. To investigate this, a proteomic analysis of the complement system was undertaken, including inhibitory proteins. In this cohort study, plasma was collected from 234 women (137 with PCOS and 97 controls). SOMALogic proteomic analysis was undertaken for the following complement system proteins: C1q, C1r, C2, C3, C3a, iC3b, C3b, C3d, C3adesArg, C4, C4a, C4b, C5, C5a, C5b-6 complex, C8, properdin, factor B, factor D, factor H, factor I, mannose-binding protein C (MBL), complement decay-accelerating factor (DAF) and complement factor H-related protein 5 (CFHR5). The alternative pathway of the complement system was primarily overexpressed in PCOS, with increased C3 (p < 0.05), properdin and factor B (p < 0.01). In addition, inhibition of this pathway was also seen in PCOS, with an increase in CFHR5, factor H and factor I (p < 0.01). Downstream complement factors iC3b and C3d, associated with an enhanced B cell response, and C5a, associated with an inflammatory cytokine release, were increased (p < 0.01). Hyperandrogenemia correlated positively with properdin and iC3b, whilst insulin resistance (HOMA-IR) correlated with iC3b and factor H (p < 0.05) in PCOS. BMI correlated positively with C3d, factor B, factor D, factor I, CFHR5 and C5a (p < 0.05). This comprehensive evaluation of the complement system in PCOS revealed the upregulation of components of the complement system, which appears to be offset by the concurrent upregulation of its inhibitors, with these changes accounted for in part by BMI, hyperandrogenemia and insulin resistance.     

A comparison of management practices, farmer-perceived disease incidence and winter housing on organic and non-organic dairy farms in the UK

There have been increases in the number of organic dairy farms in the UK in recent years. However, there is little information on the impact of organic regulations on cow welfare. As part of a larger study, we aimed to investigate differences between organic and non-organic farms in management practices and winter housing quality. Forty organic and 40 non-organic farms throughout the UK were visited. Organic and non-organic farms were paired for housing type, and as far as possible for herd size, genetic merit and location. A detailed questionnaire covering key aspects of dairy management was carried out with each farmer. On a subset of twenty pairs, an assessment of the quality of the winter housing for both lactating and dry cows was undertaken, covering the parlour, bedding, loafing and feeding areas. Management practices and building conditions varied greatly within farm types and there was considerable overlap between organic and non-organic farms. Milk yield, level and composition of concentrate feed, management of heifers and calving, and use of 'alternative treatments' to prevent and treat mastitis differed between organic and non-organic farms. In all other respects there were no differences between farm types. Building dimensions per cow did not differ, even though organic recommendations advise greater space per cow than recommended for non-organic farms. The similarity between organic and non-organic farms in most respects indicates that cow housing and health, based on both the described management regimes and the farmers' perceptions of disease incidence, on organic dairy farms is neither compromised by the regulations, nor considerably better than on non-organic farms.     

Shelf life of several marine fish species of Bangladesh during ice storage

Organoleptic, biochemical and bacteriological aspects of five tropical marine fish such as silver jewfish, Bombay duck, big-eye tuna, Chinese pomfret and ribbon fish stored in ice were studied. Organoleptically all fish were found acceptable for 10–13 days before becoming inedible. Proximate analysis showed that moisture content increased slightly; protein and lipid content decreased gradually and ash had little or no significant change. pH, TVB-N, peroxide and aerobic plate count values increased with increasing storage period but the values were within acceptable range up to 10 days of storage. Changes in myofibrillar ATPase activity and solubility of these fishes showed that Ca²⁺ ATPase in the presence of both 0.1  m and 0.5  m KCl decreased gradually whereas no marked changes were observed in the Mg⁺² ATPase activities in the presence/absence of Ca⁺². Myofibrillar protein solubility of all fish samples also decreased considerably during ice storage. The decrement in Ca²⁺ ATPase activity and solubility indicates denaturation of myofibrillar protein of fish samples during ice storage.     

Effect of operating factors on liquid–liquid mass transfer and dispersion pattern of sedimentary liquid in a mechanically stirred vessel

Liquid–liquid dispersion and mass transfer were investigated in mechanically stirred vessels without baffles by changing operation factors such as an impeller rotation speed, off-bottom clearance, volumetric liquid ratio, etc. The dispersion regime was categorized into five groups: the sedimentary liquid was kept at the vessel bottom (I), partially elevated without any collision (II), partially dispersed by colliding with the impeller bottom (III), both liquids were partially dispersed by collisions with impeller blades (III’), and the sedimentary liquid was completely dispersed (IV). The dispersion switched to I → II → III → IV with the increasing rotation speed and decreasing off-bottom clearance. The liquid–liquid mass transfer rate was significantly enhanced with the collision of the sedimentary liquid with the impeller bottom, and subsequently increased with the increasing rotation speed, volumetric liquid ratio, and vessel diameter and with the decreasing off-bottom clearance. A multiple regression analysis method was applied to determine the mass transfer rates of III and III’.     

Thermal behaviour and crystallization analysis of ethylene-propylene (EP) copolymer and EP-styrene terpolymer

Polyolefin copolymers have been an important commercial product since their invention. Hence, it is crucial to study their co- and terpolymers due to their extensive use. In this paper, in situ synthesis of ethylene-propylene (EP) copolymer, its terpolymer with styrene, and composites with nickel-chromium (NiCr) layered double hydroxide (LDH) has been reported along with their thermal properties. Styrene had a significant impact on the activity, increasing the yield by 195% and 235% with an addition of 0.5 and 1.0 mL styrene, respectively, compared to neat EP. The crystallinity, melting temperature, and thermal stability decreased due to styrene; nevertheless, it performed better compared to a similar work of terpolymer where α-olefin was the third monomer. The incorporation of NiCr LDH as a drop-in filler during in situ polymerization affected adversely the thermal stability of the terpolymer. However, the ultrasonication treatment improved the thermal stability of the final product.     

Preparation of Rayon Fiber-Reinforced Polypropylene Composites by Extrusion Techniques

Hybrid composites from rayon fibers (～2–5 cm size) and polypropylene (PP) were fabricated by using an extruder. Fibre content of the composite was varied from 5–30% by weight and physico-mechanical properties of the composites were measured. Surface morphology as observed by SEM showed good interface adhesion between rayon and PP matrix. Furthermore inclusion of rayon (up to 15% fiber inclusion) in the composite increased tensile, bending and hardness properties. As the fiber content in the composite increased more than 15%, physico-mechanical properties decreased due to the decrease of fiber matrix adhesion. The change of tensile properties due to environmental aging was carried out by keeping the composite under soil for 1 month and tensile properties were measured periodically. The aging result suggests that composites retained about 75% of its original tensile and bending strength even after 1 month soil burial. The modified fibers were also used for the study. As such the fibers were treated with vinyl-trimethyoxysilane and methanol solution and irradiated under UV before being used with PP in extruder. The results showed retardation of the physico-mechanical properties for composites obtained from irradiated rayon fibers than the composites fabricated from non irradiated rayon fibers.     

Cloud Point Extraction of Parabens Using Non-Ionic Surfactant with Cylodextrin Functionalized Ionic Liquid as a Modifier

A cloud point extraction (CPE) process using non-ionic surfactant (DC193C) to extract selected paraben compounds from water samples was investigated using reversed phase high performance liquid chromatography (RP-HPLC). The CPE process with the presence of β-cyclodextrin (βCD) functionalized ionic liquid as a modifier (CPE-DC193C-βCD-IL) is a new extraction technique that has been applied on the optimization of parameters, i.e., pH, βCD-IL concentration and phase volume ratio. This CPE-DC193C-βCD-IL method is facilitated at 30 °C, showing great losses of water content in the surfactant-rich phase, resulting in a high pre-concentration factor and high distribution coefficient. The developed method CPE-DC193C-βCD-IL did show enhanced properties compared to the CPE method without the modifier (CPE-DC193C). The developed method of CPE-DC193C-βCD-IL gives an excellent performance on the detection of parabens from water samples with the limit of detection falling in the range of 0.013–0.038 μg mL⁻¹. Finally, the inclusion complex formation, hydrogen bonding, and π–π interaction between the βCD-IL, benzyl paraben (ArP), and DC 193C were proven using ¹H NMR and 2D NOESY spectroscopy.     

Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods

ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming bridging network in some areas. The impact of different hydrogen concentrations on the Pd-sensitized ZnO nanorods was investigated using an impedance spectroscopy (IS). The grain boundary resistance (R_gb) significantly contributed to the sensing properties of hydrogen gas. The boundary resistance was decreased from 11.95 to 3.765 kΩ when the hydrogen concentration was increased from 40 to 360 ppm. IS gain curve showed a gain of 6.5 for 360 ppm of hydrogen at room temperature. Nyquist plot showed reduction in real part of impedance at low frequencies on exposure to different concentrations of hydrogen. Circuit equivalency was investigated by placing capacitors and resistors to identify the conduction mechanism according to complex impedance Nyquist plot. Variations in nanorod resistance and capacitance in response to the introduction of various concentrations of hydrogen gas were obtained from the alternating current impedance spectra.