Impacts of CO2 emission constraints on technology selection and energy resources for power generation in Bangladesh

This paper examines the impacts of CO₂ emission reduction target and carbon tax on future technologies selection and energy use in Bangladesh power sector during 2005–2035. The analyses are based on a long-term energy system model of Bangladesh using the MARKAL framework. The analysis shows that Bangladesh will not be able to meet the future energy demand without importing energy. However, alternative policies on CO₂ emission constraints reduce the burden of imported fuel, improve energy security and reduce environmental impacts. The results show that the introduction of the CO₂ emission reduction targets and carbon taxes directly affect the shift of technologies from high carbon content fossil-based to low carbon content fossil-based and clean renewable energy-based technologies compared to the base scenario. With the cumulative CO₂ emission reduction target of 10–20% and carbon tax of 2500 Taka/ton, the cumulative net energy imports during 2005–2035 would be reduced in the range of 39–65% and 37%, respectively, compared to the base scenario emission level. The total primary energy requirement would be reduced in the range of 4.5–22.3% in the CO₂ emission reduction targets and carbon tax 2500 Taka/ton scenarios and the primary energy supply system would be diversified compared to the base scenario.     

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals have been carried out using a quasi‐relativistic density‐functional method. The metal surface is simulated by a M₁₀ cluster model. Reaction energies for the elementary steps involved are determined. The activation energies are estimated by the analytic BOC‐MP formula. The results support that these metals are active in CO hydrogenation to methanol. The rate‐determining steps are shown to be different for the metals. The highest activation energies of reaction on the metals fall in the order Cu < Pd < Pt, which corresponds to the order of the catalytic activities of the metals in CO hydrogenation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Photo‐induced Charge Transfer and Relaxation of Persistent Charge Carriers in Polymer/Nanocrystal Composites for Applications in Hybrid Solar Cells

The photo‐induced charge transfer and the dynamics of persistent charge carriers in blends of semiconducting polymers and nanocrystals are investigated. Regioregular poly(3‐hexylthiophene) (P3HT) is used as the electron donor material, while the acceptor moiety is established by CdSe nanocrystals (nc‐CdSe) prepared via colloidal synthesis. As a reference system, organic blends of P3HT and [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) are studied as well. The light‐induced charge transfer between P3HT and the acceptor materials is studied by photoluminescence (PL), photo‐induced absorption (PIA) and light‐induced electron spin resonance spectroscopy (LESR). Compared to neat P3HT samples, both systems show an intensified formation of polarons in the polymer upon photo‐excitation, pointing out successful separation of photogenerated charge carriers. Additionally, relaxation of the persistent charge carriers is investigated, and significant differences are found between the hybrid composite and the purely organic system. While relaxation, reflected in the transient signal decay of the polaron signal, is fast in the organic system, the hybrid blends exhibit long‐term persistence. The appearance of a second, slow recombination channel indicates the existence of deep trap states in the hybrid system, which leads to the capture of a large fraction of charge carriers. A change of polymer conformation due to the presence of nc‐CdSe is revealed by low temperature LESR measurements and microwave saturation techniques. The impact of the different recombination behavior on the photovoltaic efficiency of both systems is discussed.     

Xylene Isomerization in the Liquid Phase Using Large‐Pore Zeolites

Three large‐pore zeolites, Beta with Si/Al ratios of 25 and 35 and Mordenite with an Si/Al ratio of 30, were studied in the conversion of o‐xylene at 493 K. Maximum conversion was achieved by the catalyst with the highest Si/Al ratio due to faster diffusion of the isomer inside the zeolite channels because of the lower acidity of the solid even with larger crystal size. A kinetic study was then carried out over this catalyst between 473 and 513 K in a batch reactor in the liquid phase. The activation energies obtained do not indicate the presence of diffusional constraints towards any isomer. Finally, the kinetic model obtained was simulated in a fixed‐bed reactor and compared to ZSM‐5 in the temperature range from 493 to 533 K. An increment in p‐xylene production of 20 % on average was obtained.     

Lipid oxidation products of heated soybeans as a possible cause of protection from ruminal biohydrogenation

Heating oilseeds has been shown to improve the milk fatty acid profile when given to dairy cows, compared to raw oilseeds. However, results from published studies are conflicting. The conditions of heating and storage of the oilseeds could be responsible for these differences, probably partly through their effects on lipid oxidation, the products of which could act on ruminal biohydrogenation (BH). Thus, 15 different treatments were applied to ground soybeans: three levels of heating (no heating, 30 min at 110 or 150°C) × 5 ambient storage durations (0, 1, 2, 4, or 6 months). Soybeans were incubated in vitro with ruminal fluid for 6 h. Triacylglycerol (TAG) polymers, hydroperoxides and hydroxyacids (HOA), aldehydes, and fatty acids were assayed in soybeans and ruminal culture. No TAG polymer was detected in any treatment. Soybeans stored for a long time had a high content of HOA, whereas those heated at 150°C, whatever the storage duration, had high aldehyde contents. The percentage disappearance of cis‐9,cis‐12 18:2 and cis‐9,cis‐12,cis‐15 18:3 in incubates decreased significantly in cultures with heated soybeans, especially at 150°C, suggesting that this partial protection of polyunsaturated fatty acids (PUFA) from BH was at least in part linked to the aldehyde content of the heated soybeans. Practical applications: Oilseeds given to ruminants are often heated, and heat treatment is known to generate oxidation products. Knowing what oxidation products influence ruminal biohydrogenation of unsaturated fatty acids could result in technological processes allowing a better transfer of unsaturated fatty acids from oilseeds to ruminant products.     

1‐Arylsulfonyl‐5‐(N‐hydroxyacrylamide)indolines Histone Deacetylase Inhibitors Are Potent Cytokine Release Suppressors

A series of 1‐arylsulfonyl‐5‐(N‐hydroxyacrylamide)indolines ( 7 – 15 ) has been developed; the compounds exhibited potent histone deacetylase (HDAC) inhibitory activities. Notably, almost all of this series exhibited better HDAC‐inhibitory and antiproliferative activities than 3‐(1‐benzenesulfonyl‐1H‐indol‐5‐yl)‐N‐hydroxyacrylamide ( 6 ), as reported in a previous study. Among these compounds, 3‐[1‐(4‐methoxybenzenesulfonyl)‐2,3‐dihydro‐1H‐indol‐5‐yl]‐N‐hydroxyacrylamide ( 9 ) showed a two‐ to tenfold increase in activity compared to SAHA ( 1 ) in the suppression of lipopolysaccharide‐induced cytokine production. Compound 9 also caused a marked reduction in carrageenan‐induced acute inflammation in a rat model. Taken together, these data indicated that 1‐arylsulfonyl‐5‐(N‐hydroxyacrylamide)indolines HDAC inhibitors exhibit potent anti‐inflammatory activity.