Realization of reconfigurable filtering horn antennas using active frequency selective surfaces for GSM and LTE signal filtering

Herein, it is aimed to design an Active Frequency Selective Surface (AFSS) based high performance reconfigurable filtering antenna (Filtenna). The proposed AFSS unit element is consist of a single PIN diode with a simple microstrip patch design which performance characteristics are varies with the state of the diodes. The proposed unit elements have been used to form an array that is placed at the aperture of a double ridge horn antenna. With the variation in state of diodes, the antenna acts as a Filtenna module to filtering the incoming electromagnetic waves in frequency band of 1.8 to 2.8 GHz. From the experimental results, it is shown that the proposed Filtenna achieves a signal attenuation of 7.3 dBi at 2.1 GHz.     

低噪声APD偏置电路

１ＡＰＤ的特性雪崩光电检测器 (ＡＰＤ)和ＰＩＮ二极管通常被作为接收器用于光通信中。其中ＡＰＤ适合于高灵敏度和高带宽的光接收电路。但这种器件在工作时需要施加一个反向结压 ,这样 ,当接收到射线时产生的电子空穴对会被外加电场收集并转换为电流 ,其电流强度正比于射线强度。另外 ,工作时施加在器件上的反向偏置电压会引发雪崩效应 ,其雪崩增益可通过改变偏压来进行调节。这就有可能对光纤接收器的增益进行优化。然而 ,要得到满意的雪崩增益 ,就必须给ＡＰＤ提供一个比较高的反向偏压。很多ＡＰＤ需要４０Ｖ～６０Ｖ的偏压 ,有些器件…     

Preparation and characterization of conductive polypyrrole/kaolinite composites

Conductive polypyrrole (PPy)/kaolinite clay composites were prepared by in situ chemical polymerization of pyrrole in the presence of kaolinite using FeCl₃ as oxidant. The PPy content and conductivity of the composites reached 32.8% and 8.3×10^?2 S/cm at HCl concentrations of 1.5 M and 0.5 M, respectively. The microhardness of the composites containing different amounts of PPy was higher than that of the PPy and kaolinite components. The highest microhardness observed was 30.17 kg/mm² for the composite containing 9.6% PPy. The electrical resistance of the composites was monitored during heating–cooling cycles over the range 5–120 °C. The change in resistance with temperature was more repeatable for the composite than for PPy. The composites were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The humidity-sensing properties were also examined.     

A Planning Framework for Non-Prehensile Manipulation under Clutter and Uncertainty

Robotic manipulation systems suffer from two main problems in unstructured human environments: uncertainty and clutter. We introduce a planning framework addressing these two issues. The framework plans rearrangement of clutter using non-prehensile actions, such as pushing. Pushing actions are also used to manipulate object pose uncertainty. The framework uses an action library that is derived analytically from the mechanics of pushing and is provably conservative. The framework reduces the problem to one of combinatorial search, and demonstrates planning times on the order of seconds. With the extra functionality, our planner succeeds where traditional grasp planners fail, and works under high uncertainty by utilizing the funneling effect of pushing. We demonstrate our results with experiments in simulation and on HERB, a robotic platform developed at the Personal Robotics Lab at Carnegie Mellon University.     

An exponential approach for the system of nonlinear delay integro-differential equations describing biological species living together

Neural Computing and Applications - In this paper, we consider a system of nonlinear delay integro-differential equations with convolution kernels, which arises in biology. This problem...     

Identifying critical autonomous systems in the Internet

The Internet not only facilitates our daily activities, such as communication, entertainment and shopping but also serves as the enabling technology for many critical services, including finance, manufacturing, healthcare and transportation. On the other hand, a wide spectrum of attacks targets its communication infrastructure to disable or disrupt the network connectivity and traffic flow until recovery processes take place. Attacking all autonomous systems (ASes) in the Internet is typically beyond the capability of an adversary. Therefore, targeting a small number of ASes which results in the highest impact is the best strategy for attackers. Similarly, it is important for network practitioners to identify, fortify and secure those critical ASes to mitigate the impact of the attacks. In this study we introduce an intuitive and effective measure, IP address spatial path stress centrality, to assess and identify the critical ASes in the Internet. We compare IP address spatial path stress centrality to the three well-known and widely used centrality measures, namely customer-cone size, node degree and betweenness. We demonstrate that the proposed measure incorporates business relations and IP address spaces to achieve a better measure for identifying the critical ASes in the Internet.     

Optimisation of sourdough bread incorporation into wheat bread by response surface methodology: Bioactive and nutritional properties

The optimisation of the quantity of sourdough (A) prepared with two different fermentation methods, [spontaneous fermentation (F1) vs. starter of lactic acid bacteria‐added fermentation (F2)], instant active dry yeast (B) and wheat bran (C) for a nutritionally improved bread formulation has been studied by evaluating the bioavailability and bioactive properties. The bread produced according to the optimised formula and fermentation types of F1 (OB_F1) and F2 (OB_F2) was compared with control bread (CB). The optimised levels for F1 were 11.45% for sourdough, 1.10% for dry yeast and 1.58% for wheat bran and for F2 6.99% for sourdough, 1.02% for dry yeast and 38.84% for wheat bran. The addition of sourdough significantly (P < 0.05) affected antioxidant activity, total phenolic content, in vitro ash and protein digestibility, and enzyme resistance starch contents of bread. The F1 fermentation method was found to be more effective in terms of bread properties examined.     

A robust weakly compressible SPH method and its comparison with an incompressible SPH

This paper presents a comparative study for the weakly compressible (WCSPH) and incompressible (ISPH) smoothed particle hydrodynamics methods by providing numerical solutions for fluid flows over an airfoil and a square obstacle. Improved WCSPH and ISPH techniques are used to solve these two bluff body flow problems. It is shown that both approaches can handle complex geometries using the multiple boundary tangents (MBT) method, and eliminate particle clustering‐induced instabilities with the implementation of a particle fracture repair procedure as well as the corrected SPH discretization scheme. WCSPH and ISPH simulation results are compared and validated with those of a finite element method (FEM). The quantitative comparisons of WCSPH, ISPH and FEM results in terms of Strouhal number for the square obstacle test case, and the pressure envelope, surface traction forces, and velocity gradients on the airfoil boundaries as well as the lift and drag values for the airfoil geometry indicate that the WCSPH method with the suggested implementation produces numerical results as accurate and reliable as those of the ISPH and FEM methods. Copyright © 2011 John Wiley & Sons, Ltd.     

Trend Assessment by the Innovative-Şen Method

Hydro-meteorological time series may include trend components mostly due to climate change since about three to four decades. Trend detection and identification in a better and refined manner are among the major current research topics in water resources domain. Even though different methodologies can be found for trend detection in literature, two well-known procedures are the Mann-Kendall (MK) trend test and recently innovative-?en trend method, which provides different aspects of the trend. The theoretical basis and application of these two methods are completely different. The MK test gives a holistic monotonic trend without any categorization of the time series into a set of clusters, but the innovative-?en method is based on cluster and provides categorical trend behavior in a given time series. The main purpose of this paper is to provide important differences between these two approaches and their possible similarities. The applications of the two approaches are given for hydro-meteorological records including relative humidity, temperature, precipitation and runoff from Ergene drainage basin in the north-western part of Turkey. It is observed that although MK trend test does not show significant trend almost in all the cases, the innovative-?en approach yields trend categorizations as “very low”, “low”, “medium” “high” and “very high”, which should be taken into consideration in future flood (“very high”) and drought (“very low”) studies.