人支气管上皮靶细胞形态学参数的测量

支气管上皮靶细胞形态学参数对计算受氡子体照射的支气管的剂量是很重要的。本文介绍利用奥尔新兰-PAS 染色的外科切除人肺组织切片,测量基底细胞粘液细胞和的胞核深度与数目。结果表明,叶、段和小支气管的粘液细胞核深度分别为相应节段基底细胞的61%、69%和73%;此三节段粘液细胞的数目分别为基底细胞的53%、29%和28%,平均为37%。     

A study of arc stability of basic electrode in view of uniform design method

In order to develop a basic electrode with low fume and good usability, a uew slag system has been designed after analyzing several basic electrode slag systems. Then in view of uniform design method, arranging the experiment points by it, the influenced laws of the uew system coating compouents on the arc stability had been searched. In the formula, niue coating compouents were taken as independent variables and they were divided into six levels in all twenty-four experiments. The arc stability was taken as function and taken down the data when welding and then put them into the computer to be processed statistically. The analysis results give the mathematical model and trend diagrams between independent variables and the function. They indicate that the effects of many coating compouents on the arc stability are in the mutual form. The mutual effects between CaCO3 and BaF2, BaF2 and BaCO3 , increases the arc stability separately. While the mutual effects between CaF2 and iron powder, the square item of iron powder itself decreases the arc stability separately.     

太原市城南地区汾河与东岸防洪隐患与出路

本文对当前城南地区汾河以东防洪存在的诸多隐患进行了阐述，并提出了相应的见解与措施。     

TBM地区低孔渗高产气储层预测

 本文从TBM地区目的层的地质和地球物理特征分析出发，以三维地震资料为基础，综合利用人工和神经网络波形分类等定性储层预测方法和利用反演及敏感地震属性分析，对TBM地区低孔渗砂岩分布区开展了砂体展布特征分析和天然气高产区预测研究。根据研究结果部署了10口钻井，已完钻的4口井中有3口获得高产气流（其中DK27井日产天然气36.8×10⁴m³）。值得指出的是，目前所用的预测方法还不能预测厚度小于6m的单砂层或砂层组构成的储层。     

臭氧氧化-光催化降解水中的五氯酚

利用臭氧氧化-光催化技术降解水中的有机污染物五氯酚(PCP)。对比了紫外光照射、臭氧氧化、光催化、臭氧氧化-光催化4种方法降解PCP的情况。考察了臭氧氧化-光催化体系中臭氧流量、臭氧产量、PCP初始质量浓度、pH和CO23-等因素对PCP降解率的影响。实验结果表明,臭氧氧化-光催化法比单独使用紫外光照射、臭氧氧化、光催化法更能有效的去除PCP;增加臭氧流量和臭氧产量有利于提高PCP的降解率;降低PCP的初始浓度,PCP的降解率显著提高;pH对PCP的降解效果影响不明显;CO23-的存在显著降低了PCP的降解率。在臭氧氧化-光催化体系中,除臭氧直接氧化降解PCP外,臭氧与TiO2协同作用产生的.OH对PCP的降解也起到了重要作用。     

Damaged layer characteristics in micro-endmilling of copper using an ultrahigh-speed air spindle

This paper presents an investigation on the characteristics of damaged layer in micro-machining by using the ultrahigh-speed air spindle. The damaged layer in metal cutting is derived from plastic deformation and transformation of metal structure. In this study, micro-cutting force, surface roughness, and plastic deformation layer according to the variation of machining conditions were investigated by experiments. The damaged layer was measured using optical microscope for the samples prepared by metallographic techniques. Its scale was dependent on cutting process parameters, especially feed per tooth. According to experimental results, it was verified that the thickness of damaged layer was increased with increasing of feed per tooth and cutting depth, also thickness of damaged layer was reduced in down-milling compared to upmilling during micro-endmilling operation.     

变压吸附制氧设备真空风机入口压力低分析和处理

介绍了邯钢动力厂真空变压吸附制氧设备的工艺流程,从切换阀本体、电磁阀及仪表气源等方面分析和总结了真空风机入口压力低引起系统联锁停车故障原因,并介绍了相应的处理措施。     

降低钛材价格、促进钛在舰船上的应用

舰船是武器装备和兵员在水上或水下的运动作战平台。空船质量很大。钛材是一种优秀的舰船结构材料，已广泛应用于潜艇壳体、机电设备中，但价格昂贵，用于空船质量的比例还很少，从设计质量分析中阐明，铁材降价1／3将有利于代替铜合金和不锈钢，在舰船上广泛推广。     

Parallelization of WHILE loops on pipelined architectures

Modulo scheduling theory can be applied successfully to overlap Fortran DO loops on pipelined computers issuing multiple operations per cycle both with and without special loop architectural support. This paper shows that a broader class of loops—REPEAT-UNTIL, WHILE, and loops with more than one exit, in which the trip count is not known beforehand—can also be overlapped efficiently on multiple-issue pipelined machines. The approach is described with respect to a specific machine model, but it can be extended to other models. Special features in the architecture, as well as compiler representations for accelerating these loop constructs, are discussed. Performance results are presented for a few select examples.An earlier version of this paper was presented at Supercomputing '90.     

An Interval Fuzzy Multiobjective Watershed Management Model for the Lake Qionghai Watershed, China

Integrated watershed management is required to ensure the reasonable use of resources and reconcile interactions among natural and human systems. In the present study, an interval fuzzy multiobjective programming (IFMOP) method was used to solve an integrated watershed management problem. Based on system analysis, an IFMOP model suitable for a lake watershed system {IFMOPLWS} was developed and applied to the Lake Qionghai watershed in China. Scenario analysis and an interactive approach were used in the solution process. In this manner, various system components were incorporated into one framework for holistic consideration and optimization. Integrality and uncertainty, as well as the multiobjective and dynamic characteristics of the watershed system, were well addressed. Using two scenarios, two planning schemes were generated. Agriculture, tourism, macroeconomics, cropland use, water supply, forest coverage, soil erosion, and water pollution were fully interpreted and compared to identify a preferable planning alternative for local agencies. This study showed that the IFMOPLWS is a powerful tool for integrated watershed management planning and can provide a solid base for sustainable watershed management.