录像机无调整式数字伺服

本文介绍了用一个专用微处理器实现新型无调整式数字伺服系统,并在此基础上提出了一种新的磁鼓电机控制方法。     

长幅外摆线轮齿廓曲线的优化圆弧

本文提出了用最优化圆弧代替长幅外摆线轮齿廓曲线的一种新型算法。该算法实用简单,拟合效果好,并可用于渐开线等其它类型曲线。     

D2000-22型煤气鼓风机的振动原因分析及改善

针对D2000--22型煤气鼓风机的结构特点及工作原理，对产生机械振动原因进行了分析，并提出改善措施。     

氟碳铈矿／直氟碳钙铈矿混层结构中新规则混层矿物的超微结构研究

用电子衍射和晶格像技术研究了钙稀土氟碳酸盐矿物中的氟碳铈矿（Ｂ）／直氟碳钙铈矿（Ｓ）混层结构，发现并确定了Ｂ＿４Ｓ＿４、Ｂ＿８Ｓ＿６、Ｂ＿１Ｓ＿６、Ｂ＿７Ｓ＿４和Ｂ＿２Ｓ＿１５种新规则混层矿物的对称性、晶胞参数及理论晶体化学式。根据所获得的高分辨晶格像真实而直观地揭示出该类Ｂ＿ｍＳ＿ｎ（ｍ＞ｎ）型新规则混层矿物的长周期有序堆垛结构特征及变化规律。     

难熔金属与硬质材料进展─—从第十三届国际普兰西会议看发展动向（Ⅰ）

根据第十三届国际普兰西会议获得的信息，对国际上难熔金属、硬质合金、硬质材料和涂层技术等方面近几年来的研究和发展动态进行了综合评述。最后，提出了几点自己的看法。     

Comparisons of PWM and one-cycle control for power amplifier with multilevel converter

Based on the concepts of cascade multilevel converters and one-cycle technique, comparisons are conducted to characterize the distortion of the pulsewidth modulation (PWM) and one-cycle control methods that were applied to converters. Simulation results for the different control schemes are obtained in PSIM software initially to see the effect of one-cycle control different from that of PWM control. Through the comparisons, the advantages and disadvantages are identified for each method. The one-cycle scheme is better than PWM control in reducing undesirable harmonics and tracing dynamic waveforms. Simulation and experimental results are also provided to verify the conclusions.     

用CPLD实现的高速数字图像存储转发装置

本文叙述了一种利用CPLD器件实现的高速数字图像存储转发装置,它被用于一个数字视频图像传输系统中.该装置的主要功能是将来自于CCD的数字图像数据存入大容量存储器中,并可以对数据进行编码,变换成PCM码输出.由于采用了VHDL语言设计,实现了分立器件难以实现的功能,提高了系统的可靠性,并可以方便地移植到各种CPLD器件中.     

四川盆地中部上三叠统香溪群岩性油气藏圈闭类型及其特征

四川盆地川中地区构造平缓,大型断裂欠发育,已发现的油气藏与背斜关系并不十分密切。研究认为,川中地区香溪群主要发育岩性圈闭,根据圈闭形成主控因素,结合香溪群沉积前的古地貌特征和裂缝发育特点,将川中香溪群岩性圈闭划分为4种类型:①与地层尖灭相关的地层—岩性圈闭;②与沉积—成岩相变密切相关的成岩—岩性圈闭;③与古地貌有关的差异压实作用形成的岩性圈闭;④与断层转化调节相关的裂缝—岩性复合圈闭。其中成岩—岩性圈闭和地层—岩性圈闭,是川中香溪群最重要的、分布最广泛的圈闭类型。     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

YAG：Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.