Modification of sandy soil using water‐borne polymer

A new polymeric system has been applied for structural modification of (noncompactable) sandy soils. The system is based on a water‐borne styrene acrylic polymeric formulation (emulsion) containing varying amounts of solid polymer. The present work deals with system optimization and measurements designed to examine the effects of polymer content on hydraulic conductivity and compressive strength. Samples were prepared from prescribed amounts of polymer, water, and sand by using two different preparations methods (mixing and spraying). Measurements of hydraulic conductivity for both sets of samples were conducted in a flexible membrane test apparatus. For the first set of samples, the permeability coefficient of the sand was noted to be reduced 10‐fold (from 10^?5 to 10^?6 m s^?1) upon the incorporation of about 2% polymer. In the second set (samples prepared with the spraying method), the hydraulic conductivity was further reduced to 7.2 × 10^?7 at a polymer concentration of about 2%. Stress–strain measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. For both types of preparation methods, the compressive strength and modulus of elasticity increased linearly with the polymer concentration in the sample. Scanning electron microscopic examination revealed that the dramatic reduction in the permeability and the improved mechanical properties are attributed to the polymer coverage of the sand particles and the development of interconnecting ties between them. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2484–2491, 2003     

New Type Anode for Calcium Ion Batteries Based on Silicon Carbide Monolayer

Silicon - A theoretical research study was conducted into the possibility of using a two-dimensional graphene-like material silicon carbide nano-sheet (2D-SiCNS) as an anode in rechargeable Ca-ion...     

Carbon Nanotube (10, 0) and Silicon Nanotube (7, 0) as a Novel Material for Drug Delivery of Substituted Eugenols as Antioxidant Drugs

Silicon - The potential of CNT(10, 0) and SiNT(7, 0) and their metal doped CNT(10, 0) and SiNT(7, 0) to adsorb the NH2, OH and Ethyl eugenols are examined. The antioxidant potential of NH2-, OH-...     

CuII Pyrazolyl-Benzimidazole Dinuclear Complexes with Remarkable Antioxidant Activity

Three dinuclear coordination complexes generated from 1-n-butyl-2-((5-methyl-1H-pyrazole-3-yl)methyl)-1H-benzimidazole ( L ), have been synthesized and characterized spectroscopically and structurally by single crystal X-ray diffraction analysis. Reaction with iron(II) chloride and then copper(II) nitrate led to a co-crystal containing 78 % of [Cu(NO₃)(μ-Cl)( L’ )]₂ ( C₁ ) and 22 % of [Cu(NO₃)(μ-NO₃)( L’ )]₂ ( C₂ ), where L was oxidized to a new ligand L^’ . A mechanism is provided. Reaction with copper chloride led to the dinuclear complex [Cu(Cl)(μ-Cl)( L) ]₂ ( C₃ ). The presence of N−H⋅⋅⋅O and C−H⋅⋅⋅O intermolecular interactions in the crystal structure of C₁ and C₂ , and C−H⋅⋅⋅N and C−H⋅⋅⋅Cl hydrogen bonding in the crystal structure of C₃ led to supramolecular structures that were confirmed by Hirshfeld surface analysis. The ligands and their complexes were tested for free radical scavenging activity and ferric reducing antioxidant power. The complex C₁ / C₂ shows remarkable antioxidant activities as compared to the ligand L and reference compounds.     

Structural Study of the Partially Disordered Full‐Length δ Subunit of RNA Polymerase from Bacillus subtilis

The partially disordered δ subunit of RNA polymerase was studied by various NMR techniques. The structure of the well‐folded N‐terminal domain was determined based on inter‐proton distances in NOESY spectra. The obtained structural model was compared to the previously determined structure of a truncated construct (lacking the C‐terminal domain). Only marginal differences were identified, thus indicating that the first structural model was not significantly compromised by the absence of the C‐terminal domain. Various ¹⁵N relaxation experiments were employed to describe the flexibility of both domains. The relaxation data revealed that the C‐terminal domain is more flexible, but its flexibility is not uniform. By using paramagnetic labels, transient contacts of the C‐terminal tail with the N‐terminal domain and with itself were identified. A propensity of the C‐terminal domain to form β‐type structures was obtained by chemical shift analysis. Comparison with the paramagnetic relaxation enhancement indicated a well‐balanced interplay of repulsive and attractive electrostatic interactions governing the conformational behavior of the C‐terminal domain. The results showed that the δ subunit consists of a well‐ordered N‐terminal domain and a flexible C‐terminal domain that exhibits a complex hierarchy of partial ordering.     

Improving the oxygen barrier properties of polyethylene terephthalate by graphite nanoplatelets

Enhancement of the oxygen gas barrier properties of polyethylene terephthalate (PET), used in the packaging industry, is the main objective here. For this purpose, nanocomposites of PET containing graphite nanoplatelets (GNPs) were prepared by melt compounding. The effects of the nanocomposites' structural morphology on oxygen gas permeability were analyzed using a range of thermal, microscopic, and mechanical characterization techniques. The investigated nanocomposite films exhibited GNP exfoliated morphology and good mixing with PET, as well as uniform dispersion within the polymer. All nanocomposite films were shown to possess superior oxygen barrier properties and improved thermal and dimensional stability compared with the plain PET films. In the best case, for 1.5 wt % GNP, the oxygen permeation was reduced by more than 99%. The improved barrier properties are attributed to the direct effect of the GNPs and to their induced increase of degree of crystallinity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Optimization of rotor speed based on stretching,efficiency, and viscous heating in nonintermeshing internal batch mixer: Simulation and experimental verification

Optimization of rotor speed based on stretching, efficiency, and viscous heating in nonintermeshing internal batch mixer has been investigated using polymer melt. A practical optimization technique was followed for optimization. Four different rotor speeds were used and characterized numerically with viscous dissipation and stretching. The heat distribution between rotor edge and mixer wall was calculated. Stretching experienced by the fluid was analyzed and the result was verified experimentally using particle tracking method. Exponential increase of energy dissipation between the rotor edge and the barrel at higher speed highlighted the importance of choosing the thermal properties of the polymer to avoid thermal degradation. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

MICROFLORA CHANGES IN TUNA MINCE DURING CONVECTION AIR DRV1NG

Abstract

Microorganisms grow in tuna during drying at low temperatures. The drying temperature of 50°C or below is not lethal to the microflora. The decimal reduction time (D-value) varied from 12.66 to 2.63 hr when drying temperature increased from 60 to 100°C, respectively. These values can be used to estimate the lethal effect of drying on the natural microflora in tuna.     

Surface Modification in Polycrystalline Y2O3 Under High‐Pressure/High‐Temperature Processing Conditions

A pressure‐induced phase transformation is used to refine the grain size of polycrystalline Y₂O₃, by a factor of 3000. A surface modification effect accompanies the observed grain refinement, which becomes more apparent with increasing holding time under high pressure. The surface‐modified layer exhibits lower hardness and lower oxygen content relative to the underlying material. Moreover, it possesses columnar‐grained structure with cubic symmetry, whereas the interior has a monoclinic structure.     

Influence of post-curing temperature on the structure,properties, and adhesion of vinyl ester adhesive

Vinyl ester (VE) resins are widely used as thermoset adhesives in structural joints and composites, but complete curing under environmental conditions is not produced. The existing literature dealing with the effect of post-curing on the structure, viscoelastic, mechanical, and adhesion properties of VE resin is scarce. Therefore, in this study, VE resin was subjected to different post-curing temperatures (50–140 °C) for one hour, and the changes in structure and properties were assessed. The degree of cross-linking of the VE resin depended on the post-curing temperature and cure started to be completed above 100 °C, a temperature close to the glass transition temperature (115 °C) of the completely cross-linked polymer. Furthermore, gel formation in VE resin was evidenced for post-curing temperature below 100 °C. In order to fully cross-link the VE resin, post-curing at 140 °C for one hour was necessary, and it was evidenced by an increase in the glass transition temperature and in the mechanical properties; an increase in adhesion to cold rolled steel was obtained although the shear strength was lower than in the joint produced with the non-post-cured VE resin.