The Progress of a Microbeam Facility in the Institute of Plasma Physics

The progress of a microbeam facility in the institute of Plasma Physics was discussed in this paper.This kind of equipment can supply single-particle beam which may be implanted into cells in micrometer-radius and measured by a new outstanding detector among global microbeam systems.Measurements by some plain targets showed that the highest current after the accelerator tube can be larger than 20μA ,the H2^ current before the second bending magnet is near 0.9μA ,the current after the second bending magnet is near 0.8μA,and the current of the beam line(after a 2-mm diameter aperture)is near 0.25nA which is enough for the single-particle microbeam experiment.It took scientists 3 months to do their microbeam experiment after setting up the qccelerator beam line and get the microbeam from this equipment.Two pre0collimators were installed between the 2-mm diameter aperture and the collimator to survey the beam.Tracks on the CR39 film ectched in the solution of NaOH showed that the beam can go through the collimator including a 10μm diameter aperture and the 3.5μm thick vacuum sealing film(Mylar).A new method,which is called optimization of the beam quality,was put forward in this paper,in order to get smaller diameter of beam-spot in microbeam system.     

The Influence of Magnetic Permeability on the Configuration of magnetic Field in Helimak Device

The Helimak of USA is a plasma physics experimental device designed and built by CASIPP.Its configuration of magnetic field is of very importance during the operation of this device.In this paper,the influence of magnetic permeability on configuration of magnetic field will be discussed due to the effect of weld metal in the vacuum vessel of Helimak,and some conclusion is useful for some engineering designs of the fusion experimental device.     

Surface Plasmon Resonance Enhanced Scattering of Au Colloidal Nanoparticles

Abstract Suspended gold nanoparticles have been synthesized via electrochemical method.The strongest resonance scattering peak is at 485 nm, which results from the surface plasmonresonance. When the excited wavelength is at 242 nm (12.4×10~(14) Hz), there have been a 1/2fraction frequency scattering peak at 485 nm (1/2×12.4×10~(14) Hz) and a 1/3 fraction frequencyscattering peak at 726 nm (1/3×12.4×10~(14) Hz) displayed. Emission spectra with different particlediameters were compared, the intensity of scattering light increases with the particle size. Thefrequency-dependent scattering average cross section of small particle was calculated from Mietheory. The model calculation is in agreement with the experimental results.     

Modification of Boundary Parameters and Fluctuations by IBW and LHCD in the HT-7 Tokamak

Measurements of boundary parameters and their fluctuations have been performed in ohmic (OH) plasma and Ion Bernstein Wave (IBW) and Lower Hybrid Current Drive (LHCD) enhanced confinement plasma using a pneumatically driven Langmuir probe array on HT-7 toka-maX. In the enhanced confinement plasma~ the gradients of electron density and temperature become higher and a transport barrier comes into being in the vicinity of the limiter. The boundary potential shows a clear modification in the same region. The fluctuation levels are significantly depressed and the coherences between fluctuations are reduced evidently in the enhanced plasma.Meanwhile, we obtained the spectral features and the poloidal phase velocity of fluctuations us-ing a two-point correlation technique and found obvious modifications of the turbulence and the poloidal flow. The results suggest that the improved confinement in the IBW and LHCD enhanced plasma is at least partially due to the modification of the boundary parameters and the suppression of the boundary fluctuations and fluctuation induced fluxes.     

Expansion of Plasma of Electrically Exploding Single Copper Wire Under 4.5kA～9.5kA/Wire

Abstract The experimental system for electrically exploding single metal wire has been de-signed and manufactured. Expansion of the dense plasma column formed from an electricallyexploding Cu wire of diameter 30 μm has been studied with a high-speed photographer to obtainthe time-dependent radius (R-t) curve. The experimental results demonstrate that the mean ex-pansion rate of the dense plasma column is 1.94 μm/ns, 2.6 μm/ns and 3.75 μm/ns according tothe peak pulse current 4.5 kA, 7 kA and 9.5 kA respectively. The results can be beneficial to givinga profound understanding of the early stage of wire-array Z-pinch physics and to improvement ontheir design.     

The Experiment of Obtaining Micron Beam in the Single-Particle Microbeam Facility of the Institute of Plasma Physics

The Experiments, methods and results of obtaining micron beam in the Microbeam Facility of the Institute of Plasma Physics were discussed in this paper. The H2^ beam was accelerated by the Van de Graa/f electrostatic accelerator, and the collimator at the end of the beam line is a 60μm thick stainless steel chip. And as a result, particle tracks on the solid track probes (CR39 film) etched in the solution of NaOH showed that the beam can go through the collimator with a small aperure (2000, 300, 55, 30, or 10μm) and 3.5μm thick vacuum film(Mylar). Besides the CR39 method, the beam was measured by an energy spectrum detector after the 10μm diameter aperture and the 3.5 μm thick vacuum film too.     

Neutronic Comparison of Tritium－Breeding Performance of Candidate Tritium－Breeding Materials

Tritium self-sustainment, which will meet the fuel requirement of fusion reactor, is one of the key issues of fusion power development. The tritium breeding performances of various tritium-breeding materials are compared based on a series of neutronics calculations using three-dimensional Monte Carlo neutron-photon transport code MCNP/4C with the IAEA FENDL-2 data library. The effects of the dimensions of the tritium-breeding zone and the enrichment of 6Li on Tritium Breeding Ratio (TBR) are analyzed. The effects of Be as a neutron multiplier on TBR are also calculated.     

HL-2A Tokamak Edge Modeling with B2

The outer divertor plasma of HL-2A and its associated scrape-off plasma have been simulated using a two-dimensional multi-species fluid code of Braams with a simplified neutral gas model. HL-2A has a double-null closed divertor in separate divertor chambers above and below the nearly circular plasma tours. The computed numerical grid is developed according to an ideal magnetic surface. The calculation is involved only with pure hydrogen plasma. The emphasis has been focused on parametric studies involving variation of the assumptions made for the core plasma. The peak temperatures and the heat flux near the target are of the principal concern。     

永磁材料的发展趋势

永磁材料的发展先后经历了金属永磁材料，铁氧体永磁材料，稀土永磁材料，纳米结构永磁材料等几个发展阶段，超导永磁体则是学术界近年来提出的一种新概念永磁体，本文在对永磁材料的发展历史和发展趋势进行了综合分析之后，对永磁材料今后的发展做出了预测。     

基于单片机的现场数据记载器

介绍一种以单片机为核心的现场数据记载器，它可以广泛应用于科研、生产等的现场取数，能够同时记录十张以上表格的数据，整个表格数据最后通过ＲＳ－２３２接口以标准ＤＢＡＳＥⅢ的格式送微机处理。本文主要介绍记载器的硬件组成、专用操作系统和配套的服务程序。