Efficiency of an Otto engine under alternative power optimizations

The proper optimization criterion to be chosen for the optimum design of the heat engines may differ depending on their purposes and working conditions. In this study, a comparative performance analysis is carried out for a reversible Otto cycle based on three alternative performance criteria namely maximum power (mp), maximum power density (mpd) and maximum efficient power (mep). The power density criterion is defined as the power per minimum specific volume in the cycle and the efficient power criterion is defined as multiplication of the power by the efficiency of the Otto cycle. Maximizing the efficient power gives a compromise between power and efficiency. Three different objective functions are defined and maximization of these functions is carried out under different design parameters of the Otto engine. The variations of power, power density and efficient power outputs are derived and presented with respect to the thermal efficiency of the cycle for various temperature ratios. It has been found that the design parameters at mep conditions lead to more efficient engines than that at the mp condition and the mep criterion may have a significant power advantage compared with mpd criterion. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of microwave radiation on processing characteristics of sulphide minerals in inert atmosphere

The influence of microwave radiation on sulphide minerals in inert atmosphere has been investigated with respect to their processing characteristics such as magnetic susceptibility and floatability. Pure sulphide mineral samples were prepared in different size fractions. Microflotation tests were performed and magnetic susceptibilities of samples were measured after treating with microwave energy in inert atmosphere at three power levels for six time intervals. Possible modifications on the mineral surfaces due to microwave energy and exposure time were evaluated by XRD and optical microscopy. The results showed that selective separation of sulphide minerals in terms of floatability and magnetic separation could be possible.     

Electrochemical copper (II) sensor based on chitosan covered gold nanoparticles

This study outlines a new sensing platform based on glassy carbon electrodes modified by gold nanoparticles (AuNPs) for the determination of heavy metal. A glassy carbon electrode was modified by chitosan stabilized AuNPs. AuNPs were prepared by reducing gold salt with a polysaccharide chitosan. Here, chitosan acted as a reducing/stabilizing agent. The AuNPs were characterized with UV–Visible absorption spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy. Chitosan covered AuNPs were immobilized on the glassy carbon electrode for the determination of Cu (II) in aqueous solutions. The electrochemical determination of Cu (II) ions was performed using the differential pulse voltammetry technique. Some parameters for Cu (II) determination, such as pH, preconcentration time and electrolysis potential of Cu (II), were optimized. The detection limit was calculated as 5 × 10^?9 mol L^?1 by means of the 3:1 current-to-noise ratio. The interference of Cr(III), Fe(II), Ni(II), Pb(II), Mg(II), Zn(II), Ba(II) ions was investigated and showed a negligible effect on the electrode response. Recovery studies were carried out using tap water.     

Phospholipid Cyclosporine Prodrugs Targeted at Inflammatory Bowel Disease (IBD) Treatment: Design,Synthesis, and in Vitro Validation

Novel phospholipid (PL)-cyclosporine conjugates were prepared and studied as potential prodrugs for inflammatory bowel disease (IBD). Our approach relies on phospholipase A₂ (PLA₂), which is overexpressed in the inflamed intestinal tissues, as the prodrug activator to potentially release cyclosporine at the site of inflammation. PL-cyclosporine prodrug conjugates with methylene linkers of various lengths between the sn-2 position of the PL and cyclosporine were synthesized and evaluated for in vitro activation. Surprisingly, despite previous work indicating that conjugates with six methylene linkers between the lipid and drug would suffer rapid enzymatic hydrolysis, with cyclosporine this was not observed. However, compounds with longer linkers (n=10, 12 methylene units) display complete release of the drug by PLA₂-catalyzed hydrolysis, thus demonstrating the importance and profound impact of structural fine-tuning. This study represents a proof-of-concept for our hypothesis and a first step towards a truly targeted IBD treatment with cyclosporine that could be administered throughout the GI tract.     

X-ray investigation of sintered cadmium doped hydroxyapatites

Pure and cadmium (Cd) doped hydroxyapatites (HA, Ca₁₀(PO₄)₆(OH)₂) were synthesized by a precipitation method from aqueous solutions of Ca(NO₃)₂4·H₂O for the former and Cd(NO₃)₂4·H₂O for the latter, by using (NH₄)₂HPO₄ as the phosphate source, while pH was kept in the range of 11–12. The effect of incorporation of Cd²⁺ ions into the structure of HA was investigated after the air sintering at 1100 °C for 1 h. The results indicate that Cd²⁺ addition into HA yields nearly fully densified products with respect to pure stoichiometric HA. The XRD patterns showed that Cd doping increases the crystallinity of HA. The 2, 4.4, and 8.8 mol% Cd doped HAs had calcium oxide (CaO) impurity phase in their lattice. The CaO phase in the HA structure gradually disappeared with increasing Cd amount, and was replaced with cadmium oxide (CdO) in the CdHA doped with 11 mol% Cd. Cd²⁺ ion incorporation decreased the a- and c-axis lattice constants and unit cell volume of HA.     

Characterization and corrosion behavior of ceramic coating on magnesium by micro-arc oxidation

In this study, the commercial pure magnesium was coated in different aqueous solutions of Na₂SiO₃ and Na₃PO₄ by the micro-arc oxidation method (MAO). Coating thickness, phase composition, surface and cross sectional morphology and corrosion resistance of coatings were analyzed by eddy current method, X-ray diffraction (XRD), scanning electron microscope (SEM) and tafel extrapolation method, respectively. The average thickness of the coatings ranged from 52 to 74 μm for sodium silicate solution and from 64 to 88 μm for sodium phosphate solution. The dominant phases on the coatings were detected as spinal Mg₂SiO₄ (Forsterite) and MgO (Periclase) for sodium silicate solution and Mg₃(PO₄)₂ (Farringtonite) and MgO (Periclase) for sodium phosphate solution. SEM images reveal that the coating is composed of two layers as of a porous outer layer and a dense inner layer. The corrosion results show the coating consisting Mg₂SiO₄ is more resistant to corrosion than that containing Mg₃(PO₄)₂.     

The oxidative and lipolytic stability of Yayık butter produced from different species of mammals milk (cow,sheep, goat) yoghurt

Yay?k butter, made from yoghurt, is one of the traditional dairy products in Anatolia In this study, some properties of Yay?k butter produced from cow, sheep, and goat yoghurts have been observed during 30 days of storage at 4–5 °C. In this purpose yoghurts were produced from different species milks then these yoghurts were used as a raw material for production of Yay?k butters samples. On the first day of the storage, differences in pH of serum among the butter produced from different mammals were statistically significant. The highest value of lactic acid was measured in the sample of sheep butter (SB). The level of lactic acid in Yay?k butters was significantly different. Goat butter (GB) had weaker oxidative stability and significantly higher peroxide value than those of other samples. The highest accumulation of the free fatty acids has been detected in sample GB. All samples of Yay?k butter received almost the same score on the first day of the storage, but on day 30 some flavour defects in sample GB were noted by the panelists.     

Molecular dynamics simulation of compressible hot/cold moving lid-driven microcavity flow

Hard-sphere molecular dynamics simulations of lid-driven microcavity gas flow with various subsonic speeds and lid temperatures are conducted. Simulations with faster and colder lids show streamlines of stronger primary vortices. Variations of mass and energy centers with respect to lid speed and temperature are examined. Center of energy is less sensitive to employed lid conditions than center of gravity is. Although moving lid imparts energy into fluid, due to change of impingement rates on the walls of fixed temperature, average energy within the cavity seems quite insensitive to the subsonic lid speed. Behavior of compressibility at both top corners is observed even at low Mach numbers widely considered within incompressible flow region. While high Knudsen number causes considerable property slips near the lid, two-dimensional pressure, density, and temperature plots of excellent quality are generated. Results are promising in use of molecular dynamics simulations for compressible vortex flow analyses while providing insights for understanding microfluidics and nanofluidics in context of molecular mass, momentum and heat transfer in microscale and nanoscale systems.     

Biodiversity and technological properties of yeasts from Turkish sourdough

Food Science and Biotechnology - In this study, yeasts were isolated and characterized from twelve traditional sourdough samples which belongs to Black Sea and Aegean regions of Turkey. Twenty six...     

Utilization of waste marble dust as an additive in cement production

In this experimental study, the usability of waste marble dust (WMD) as an additive material in blended cement has been investigated. For this purpose, waste marble dust added cements (WMDCs) have been obtained by intergrinding WMD with Portland cement clinker at different blend ratios: 2.5%, 5.0%, 7.5% and 10% by weight. 40 × 40 × 160 mm mortar prisms have been produced with the obtained cements. Strength tests have been carried out on mortar specimen at 7, 28, and 90 days. WMDCs have been compared to each other as well as to control cements of CEM I and CEM II with respect to their physical, chemical and mechanical properties. Obtained results showed that WMDCs conform to EN 197-1 standard and thus 10% WMD can be used as an additive material in cement manufacturing.