Laser pyrolyzed organosilazane-based Al/ZrO2 composite coating on stainless steel: Resulting microstructure and mechanical properties

Protective ceramic-based coatings are frequently the most suitable solutions for problems like corrosion and wear. It has been shown that the precursor technology is suitable for the preparation of ceramic coatings by pyrolysis in a furnace. However, the required high temperature for the preparation of the ceramic coatings limits this approach to high temperature-resistant substrates. A very innovative approach to overcome this restriction is the use of laser radiation as a thermal source for the pyrolysis of the preceramic polymer. In this paper, we report on a coating system, for steel substrates, consisting of a polysilazane (Durazane 2250) bond coat and a hard and dense top-coat composed of an organosilazane (Durazane 1800) with tetragonal ZrO₂ particles and aluminum flakes as fillers pyrolyzed using Nd:YVO₄ laser. The aluminum fillers led to a significant increase in absorption of the laser energy leading to the formation of a dense coating with a thickness up to 20 μm and a mainly cellular/columnar-dendritic microstructure. The microstructure, mechanical, and tribological behaviors of these composite coatings are reported and compared to those of laser pyrolyzed glass/ZrO₂-filled polysilazane-based coatings reported in the literature.     

Effects of Preform Shear on Tensile Properties of a Woven C/SiC Composite

This article addresses effects of weave defects in an angle‐interlock C‐fiber preform on the tensile properties of the resulting fully processed C‐fiber/SiC‐matrix composite. For this purpose, a preform was intentionally sheared in a controlled manner after weaving. The resulting distortions were quantified by analyzing high‐resolution images of the preform surface after the first step of matrix processing, while the tows were still clearly visible. Comparisons are made of tensile test results on specimens cut from this composite panel and from a pristine panel in select loading orientations. Strain maps obtained by digital image correlation are used to identify local strain variations that are attributable to weave defects. The results are discussed in terms of: (i) the shear‐normal coupling that arises in loading orientations of present interest, and (ii) the geometric effects of tow misalignment on tow continuity along the specimen gauge length. The composite is found to perform in a robust manner, in the sense that the tensile properties are not sensitive to the presence of the defects.     

Conversion of Nuclear Waste to Molten Glass: Cold‐Cap Reactions in Crucible Tests

The feed‐to‐glass conversion, which comprises complex chemical reactions and phase transitions, occurs in the cold cap during nuclear waste vitrification. To investigate the conversion process, we analyzed heat‐treated samples of a simulated high‐level waste feed using X‐ray diffraction, electron probe microanalysis, leaching tests, and residual anion analysis. Feed dehydration, gas evolution, and borate phase formation occurred at temperatures below 700°C before the emerging glass‐forming melt was completely connected. Above 700°C, intermediate aluminosilicate phases and quartz particles gradually dissolved in the continuous borosilicate melt, which expanded with transient foam. Knowledge of the chemistry and physics of feed‐to‐glass conversion will help us control the conversion path by changing the melter feed makeup to maximize the glass production rate.     

Glass Dielectrics in Extreme High‐Temperature Environment

Thin and flexible glass ribbons can be rolled into a film capacitor structures for power electronic circuits. Glass has excellent electrical properties and is a leading candidate to replace polymer films for high‐temperature applications. The dielectric properties of a low‐alkali aluminoborosilicate glass were characterized up to temperatures of 400°C. Low‐field permittivity values of 6 with dielectric loss below 0.01 were found for temperatures below 300°C. The dielectric breakdown strength exceeded 5 MV/cm for temperature of 400°C and high‐field polarization measurements showed that glass has over 95% energy efficiency at temperatures of 200°C, which is a target temperature for high‐temperature power electronic circuits driven by wide bandgap semiconductor devices.     

Low temperature cure of epoxy thermosets attaining high Tg using a uniform microwave field

It is demonstrated for the first time that an epoxy thermoset resin can be cured at temperatures well below its T_g∞. This study compared the use of a uniform variable frequency microwave (VFM) field to standard oven curing at temperatures above and below T_g∞. Using T_g, tan δ, modulus, and FTIR measurements, it is shown that the reaction of BFDGE with MDA to attain a product with T_g∞ of 133 °C is achieved by VFM at temperatures from 100 to 140 °C; in contrast, the thermal cure normally requires 170 °C to attain the same T_g∞ and the same extent of cure. By following the pregel cure reaction with ¹³C‐NMR spectroscopy, it was determined that the lower cure temperatures of VFM cure predominately lead to chain extension and smaller amounts of crosslinking compared to the thermal cure. To explain these results, it is suggested that, after gelation, with VFM cure there is higher mobility from dipole rotations that continues the cure to completion without vitrification. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44222.     

Pillar design and coal burst experience in Utah Book Cliffs longwall operations

Longwall mining has existed in Utah for more than half a century. Much of this mining occurred at depths of cover that significantly exceed those encountered by most other US longwall operations. Deep cover causes high ground stress, which can combine with geology to create a coal burst hazard. Nearly every longwall mine operating within the Utah's Book Cliffs coalfield has been affected by coal bursts. Pillar design has been a key component in the burst control strategies employed by mines in the Book Cliffs.Historically, most longwall mines employed double-use two-entry yield pillar gates. Double-use signifies that the gate system serves first as the headgate, and then later serves as the tailgate for the adjacent panel. After the 1996 burst fatality at the Aberdeen Mine, the inter-panel barrier design was introduced.In this layout, a wide barrier pillar protects each longwall panel from the previously mined panel, and each gate system is used just once. This paper documents the deep cover longwall mining conducted with each type of pillar design, together with the associated coal burst experience. Each of the six longwall mining complexes in the Book Cliffs having a coal burst history is described on a panel-by-panel basis.The analysis shows that where the mining depth exceeded 450 m, each design has been employed for about 38000 total m of longwall panel extraction. The double-use yield pillar design has been used primarily at depths less than 600 m, however, while the inter-panel barrier design has been used mainly at depths exceeding 600 m. Despite its greater depth of use, the inter-panel barrier gate design has been associated with about one-third as much face region burst activity as the double-use yield pillar design.     

Large Charged Drop Levitation Against Gravity

A hybrid electrostatic-acoustic levitator that can levitate and manipulate a large liquid drop in one gravity is presented. To the authors' knowledge, this is the first time such large drops (up to 4 mm in diameter in the case of water) have been levitated against 1-gravity. This makes possible, for the first time, many new experiments both in space and in ground-based laboratories, such as 1) supercooling and superheating, 2) containerless crystal growth from various salt solutions or melts, 3) drop dynamics of oscillating or rotating liquid drops, 4) drop evaporation and Rayleigh bursting, and 5) containerless material processing in space. The digital control system, liquid drop launch process, principles of electrode design, and design of a multipurpose room temperature levitation chamber are described. Preliminary results that demonstrate drop oscillation and rotation, and crystal growth from supersaturated salt solutions are presented.     

Use of eugenol and rosin as feedstocks for biobased epoxy resins and study of curing and performance properties

In this study, an epoxy based on eugenol and an anhydride curing agent based on rosin were prepared. Curing of the eugenol epoxy with a commercial anhydride curing agent and with the rosin‐derived anhydride curing agent was studied. For comparison, a commercial bisphenol A type epoxy, DER353, was also selected in the curing study. The syntheses of the eugenol epoxy and rosin anhydride were investigated and the chemical structures of the products and intermediates were characterized using ¹H NMR and Fourier transform infrared spectroscopies. Non‐isothermal curing of the eugenol epoxy with hexahydrophthalic anhydride and the rosin‐derived maleopimaric acid was studied using differential scanning calorimetry. Thermomechanical properties and thermal stability of the cured epoxy resins were evaluated using dynamic mechanical analysis and thermogravimetric analysis, respectively. Addition of 2‐ethyl‐4‐methylimidazole as catalyst greatly decreased the curing temperature and promoted the completion of cure reactions. The results suggest that the eugenol epoxy and the bisphenol A type epoxy have similar reactivity, dynamic mechanical properties and thermal stability. © 2013 Society of Chemical Industry     

Doublecortin May Play a Role in Defining Chondrocyte Phenotype

Embryonic development of articular cartilage has not been well understood and the role of doublecortin (DCX) in determination of chondrocyte phenotype is unknown. Here, we use a DCX promoter-driven eGFP reporter mouse model to study the dynamic gene expression profiles in mouse embryonic handplates at E12.5 to E13.5 when the condensed mesenchymal cells differentiate into either endochondral chondrocytes or joint interzone cells. Illumina microarray analysis identified a variety of genes that were expressed differentially in the different regions of mouse handplate. The unique expression patterns of many genes were revealed. Cytl1 and 3110032G18RIK were highly expressed in the proximal region of E12.5 handplate and the carpal region of E13.5 handplate, whereas Olfr538, Kctd15, and Cited1 were highly expressed in the distal region of E12.5 and the metacarpal region of E13.5 handplates. There was an increasing gradient of Hrc expression in the proximal to distal direction in E13.5 handplate. Furthermore, when human DCX protein was expressed in human adipose stem cells, collagen II was decreased while aggrecan, matrilin 2, and GDF5 were increased during the 14-day pellet culture. These findings suggest that DCX may play a role in defining chondrocyte phenotype.