A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

Clinical significance of psychotherapy for unipolar depression: A meta-analytic approach to social comparison.

[Correction Notice: An erratum for this article was reported in Vol 55(3) of Journal of Consulting and Clinical Psychology (see record 2008-10745-001). The data presented in Table 2 were incorrect because a row and a column were inadvertently omitted. The corrected Table 2 appears in the erratum.] This study used meta-analysis to study the clinical significance of psychotherapy for symptoms of unipolar depression. The following questions were addressed: How similar is the posttherapy adjustment of depressed adults to that of nondepressed adults? Is this adjustment maintained at follow-up? What dimensions of treatment, therapists, or design are associated with clinical significance? Using the Beck Depression Inventory (BDI), we calculated composite BDI norms from 28 published studies. Sixty effect sizes (from 31 outcome studies utilizing the BDI) were calculated. The results indicated that psychotherapy produces outcomes that have moderate clinical significance and that are well-maintained at follow-up, that individual therapy is associated with greater clinical significance than group treatment, and that type of therapy is not related to improvement. Alternative approaches for operationalizing clinical significance as the return of individuals to normal levels of functioning are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A study on charge reduction in HfO/sub 2/ gate stacks

Charge in metal-organic chemical vapor deposition-grown HfO/sub 2/ gate stacks has been systematically studied using nMOS capacitors. It is found that, for these films, the charge in the stack is mainly concentrated at the interfaces between the layers and is negative at the HfO/sub 2//interfacial layer (IL) interface and positive at the Si/IL interface. In general, the calculated charge densities at both interfaces are of order 10/sup 12/ cm/sup -2/. A forming gas anneal (FGA) reduces both interface charge greatly. The FGA can also significantly reduce the hysteresis and interface state density. The effects of post deposition anneal at various temperatures and under various ambients have also been studied. It is found that a high-temperature dilute oxidizing ambient anneal followed by an FGA reduces the charge at both interfaces.     

Processing techniques for particulate-reinforced metal aluminium matrix composites

The critical need for high strength, lightweight and high stiffness materials has, in recent years, resurrected much interest in discontinuously reinforced powder metallurgy metal matrix composites. These hybrid materials have combined both standard wrought alloys of aluminium and a wide variety of discontinuous reinforcements such as particulates and whiskers of ceramic materials. Renewed interest in these materials as attractive candidates for use in the aerospace and transportation industry has resulted from an attractive and unique combination of physical and mechanical properties, and an ability to offer near isotropic properties coupled with the low cost of these materials when compared with existing monolithic materials. In this paper, the primary processing categories for discontinuously-reinforced metal-matrix composites are highlighted and the salient features of the various techniques in each category are discussed. The variables involved in each processing technique are examined, and the influence of alloy chemistry highlighted. Novel processing techniques for these materials such as the variable co-deposition method is presented as a means to process these novel engineering materials in order to improve their overall mechanical performance.     

Effect of temperature and cyclic heating on the structure and strength of glass textolite

The article established the regularities of change of the physicomechanical characteristics and strength of glass textolites in single and repeated thermal loading. It shows that under multiple loading the intense loss of strength of the investigated materials is due to increased porosity on account of the large number of microcracks appearing in the structure. A correlation is obtained between the elastic and strength characteristics and porosity in dependence on the temperature of multiple heating which in the first approximation is described by a polynomial of second degree with respect to temperature, multiplied by the reciprocal of porosity.Translated from Problemy Prochnosti, No. 6, pp. 53–58, June, 1991.     

Comfort limits for asymmetric thermal radiation

Groups of 32 and 16 subjects of both sexes were exposed in an environmental chamber to radiant asymmetry caused by a cool wall, a warm wall, and a cool ceiling. Each subject was tested individually while seated and clothed at 0.6 clo. During each 3.5-hour experiment the subject was exposed to six radiant temperature asymmetries. He was asked whether and where he experienced any local cool or warm sensation, and whether it was felt to be uncomfortable. During the entire experiment he was kept thermally neutral by changing the air temperature according to his wishes.For cool walls, warm walls, and cool ceilings curves have been established showing the percentage of dissatisfied subjects as a function of the radiant asymmetry. Radiant asymmetry at a warm wall caused less discomfort than a cool wall. A cool ceiling caused less discomfort than a warm ceiling. Accepting that 5% of the subjects may feel uncomfortable. a radiant temperature asymmetry of 10°C is allowable at a cool wall, 23°C at a warm wall, and 14°C under a cool ceiling. A previous study showed that 4°C is allowable under a warm ceiling. Radiant asymmetry had no significant impact on the operative temperatures preferred by the subjects. No significant differences were observed between the responses of men and women exposed to radiant asymmetry.     

The microstructures of laser-alloyed Ni-Ta surface layers

Evaporated thin tantalum films on single and polycrystalline nickel have been laser surface alloyed using either continuous-wave CO₂ or Q-switched Nd-YAG radiation. In the case of the continuous-wave laser, surface alloys contain amorphous tantalum-rich regions, intermediate polycrystalline bands of TaNi, and an underlying Ni(Ta) solid solution. In the Q-switched laser case, a much more laterally uniform amorphous phase with approximately equal atomic fractions of nickel and tantalum is found, with little evidence of polycrystalline intermetallics.In situ annealing with the electron beam of the microscope results in formation of microcrystallites, predominantly nickel.     

Olfactory discrimination of individual littermates in rats (Rattus norvegicus).

Tested the ability of 4 adult male Sprague-Dawley rats to use odors in discrimination among littermates living as a group. Ss were trained in a Y-maze to discriminate the presence of a littermate from its absence. Results from transfer of training in 3 subsequent testing periods indicated that the animals were capable of distinguishing among individuals when relatedness and familiarity were held constant, that this ability was not due to training, and that performance was based solely on odor cues. Results suggest that laboratory rats exhibit odor sensitivities conmensurate with very complex social processes. (17 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Extremely low-loss 1.5%-/spl Delta/ 32-channel athermal arrayed-waveguide grating multi/demultiplexer

A silica-based 1.5%-/spl Delta/ 100 GHz-spacing 32-channel athermal arrayed-waveguide grating (AWG) with compact size and extremely low insertion loss is described. By reducing the fibre coupling loss and the excess loss in a silicone-filled groove, an insertion loss of 1.3 dB was achieved with this athermal AWG.     

Space-dependent color gamut mapping: a variational approach.

Gamut mapping deals with the need to adjust a color image to fit into the constrained color gamut of a given rendering medium. A typical use for this tool is the reproduction of a color image prior to its printing, such that it exploits best the given printer/medium color gamut, namely the colors the printer can produce on the given medium. Most of the classical gamut mapping methods involve a pixel-by-pixel mapping and ignore the spatial color configuration. Recently proposed spatial-dependent approaches for gamut mapping are either based on heuristic assumptions or involve a high computational cost. In this paper, we present a new variational approach for space-dependent gamut mapping. Our treatment starts with the presentation of a new measure for the problem, closely related to a recent measure proposed for Retinex. We also link our method to recent measures that attempt to couple spectral and spatial perceptual measures. It is shown that the gamut mapping problem leads to a quadratic programming formulation, guaranteed to have a unique solution if the gamut of the target device is convex. An efficient numerical solution is proposed with promising results.