The influence of the local current density on the electrochemical exfoliation of graphite in lithium-ion battery negative electrodes

The local current density related to the exfoliation process of graphite negative electrodes in mixed ethylene carbonate/propylene carbonate electrolytes was controlled by a variation of the current applied to lithium half-cells containing either single type graphite electrodes or electrodes consisting of mixtures of an exfoliating and a non-exfoliating graphite. The partial local current density attributed to graphite passivation and its distribution within the volume of the electrode was found to be a key parameter to explain differences in the exfoliation behaviour observed for graphite electrodes. The local current density is related with a local overpotential which may suppress one of several possible electrochemical processes. In a negative electrode consisting of a mixture of a non-exfoliating and an exfoliating graphite component, the exfoliation of the exfoliation-sensitive graphite component can be completely suppressed when increasing the partial local current density attributed to the graphite exfoliation process above a certain threshold, by either decreasing the amount of exfoliating graphite particles in the electrode or by increasing the total current density, i.e., the specific current. The consideration of the local current density distribution for the electrochemical processes throughout the electrode leads to a more general concept for the graphite passivation behaviour during the first lithium insertion in lithium-ion batteries.     

Chemical redox recovery of giant, small-gap and other fullerenes

A simple method for extracting otherwise insoluble fullerenes into organic solvents is presented. The fullerenes are reduced to anionic charge states by contact with zinc in the presence of an alkylphosphonium salt in tetrahydrofuran. The anionic fullerenes become soluble, and the non-fullerene carbon matrix is separated by filtration. The anionic fullerenes can then be precipitated from solution by the action of a chemical oxidant such as iodine. It is also shown that there are approximately as many fullerenes left behind in carbon arc soot after solvent extraction as are extracted by the solvent. In contrast, more than twice as many fullerenes are left behind in combustion-produced fullerene soot as are solvent-extracted. Thus, approximately 70% of the total recovered carbon product from large-scale combustion synthesis is fullerenes. Conversely, no detectable amount of fullerenes can be recovered from conventional carbon blacks under the same conditions. Analysis by single photon ionization mass spectrometry suggests that C₆₀ and C₇₀ account for almost half of the fullerenes that were not solvent-extractable, suggesting that they are readily incorporated into toluene-insoluble fullerene polymers. The redox process presented here is easily up-scaled, and we routinely recover 100 g of heretofore insoluble fullerenes in 8 h.     

Pyrene-adamantane-β-cyclodextrin: An efficient host–guest system for the biofunctionalization of SWCNT electrodes

The design of nanostructured biological architectures based on host–guest interactions between β-cyclodextrin and adamantane was investigated on SWCNT coatings using glucose oxidase (GOX) as biomolecule model. β-Cyclodextrin tagged GOX was immobilized on adamantane functionalized carbon nanotubes, deposited on platinum electrodes. Different functionalization techniques to attach “pyrene adamantane” on nanotubes were studied and compared in terms of the performances of the subsequently constructed glucose biosensors. The best results were obtained by dipping the nanotube deposit into a pyrene-adamantane solution followed by electropolymerization of the adsorbed pyrene monolayer. The constructed biosensor exhibited a good linear response toward glucose concentrations between 2 × 10⁻⁷ M and 1.6 × 10⁻³ M. The maximum current density and glucose sensitivity were 154.9 μA cm⁻² and 14.4 mA M⁻¹ cm⁻², respectively.     

Hydrothermal degradation of adsorbed sulfur mustard on activated carbon

Thermal and hydrothermal degradations of adsorbed sulfur mustard (HD) on activated carbon particles from a chemical protective over-garment were studied. Carbon loaded with 5 wt.% HD was heated in a closed reactor at temperatures up to 160 °C for 0.5–6 h and analyzed by solid-state ¹³C MAS NMR. On dry carbon at room temperature, HD was stable for months. On a thoroughly pre-wetted carbon, adsorbed HD partially degraded to thiodiglycol (TDG) and TDG-sulfoxide (TDG-SO) within 2–3 months. Heating dry HD-loaded carbon to 160 °C caused partial degradation within 4 h to 1,4-thioxane, along with 1,4-dithiane and vinyl sulfides. Complete degradation within 2.5 h to the same products occurred upon hydrothermal treatment of the HD-loaded carbon, using a water/carbon ratio of 0.3:1. With higher water/carbon ratios of 0.6:1–5:1 at temperatures of 120 °C and above, adsorbed HD hydrolyzed rapidly within 0.5 h. The latter reaction led to the formation of TDG concurrent with either thioxane (at 160 °C) or TDG-SO and TDG-dimer (at 120 °C). The mechanisms of the observed degradation processes are discussed.     

Group sequential crossover trial designs with strong control of the familywise error rate

Crossover designs are an extremely useful tool to investigators, and group sequential methods have proven highly proficient at improving the efficiency of parallel group trials. Yet, group sequential methods and crossover designs have rarely been paired together. One possible explanation for this could be the absence of a formal proof of how to strongly control the familywise error rate in the case when multiple comparisons will be made. Here, we provide this proof, valid for any number of initial experimental treatments and any number of stages, when results are analyzed using a linear mixed model. We then establish formulae for the expected sample size and expected number of observations of such a trial, given any choice of stopping boundaries. Finally, utilizing the four-treatment, four-period TOMADO trial as an example, we demonstrate that group sequential methods in this setting could have reduced the trials expected number of observations under the global null hypothesis by over 33%.     

Decreasing Filter Cake Resistance by Using Packing Structures

Packed beds used in absorption columns are evaluated to determine whether they can also be beneficial for cake‐forming filtrations. To assess this, model systems are characterized and separated by using a dead‐end filter cell. Filtrations are conducted with different packings; the filtrate amount over time and resulting turbidity are evaluated. Packings increase the filter cake resistance and the separation time of the cakes formed with approximately incompressible solids. However, they exhibit a positive effect on the filtration of a more complex, compressible substance; the process is not only accelerated, but also the quality of the obtained filtrate is not compromised. These results demonstrate potential in the use of packed beds for the filtration of complex biogenic suspensions.     

Identification and Optimization of 4‐Anilinoquinolines as Inhibitors of Cyclin G Associated Kinase

4‐Anilinoquinolines were identified as potent and narrow‐spectrum inhibitors of the cyclin G associated kinase (GAK), an important regulator of viral and bacterial entry into host cells. Optimization of the 4‐anilino group and the 6,7‐quinoline substituents produced GAK inhibitors with nanomolar activity, over 50 000‐fold selectivity relative to other members of the numb‐associated kinase (NAK) subfamily, and a compound (6,7‐dimethoxy‐N‐(3,4,5‐trimethoxyphenyl)quinolin‐4‐amine; 49 ) with a narrow‐spectrum kinome profile. These compounds may be useful tools to explore the therapeutic potential of GAK in prevention of a broad range of infectious and systemic diseases.     

Soybean‐Oil‐Based Thermosetting Resins with Methacrylated Vanillyl Alcohol as Bio‐Based,Low‐Viscosity Comonomer

A novel, bio‐based, aromatic monomer (methacrylated vanillyl alcohol, MVA) is synthesized using vanillyl alcohol and methacrylic anhydride in the absence of solvents. The resulting MVA is used as a sustainable comonomer to replace styrene in a maleinated acrylated epoxidized soybean‐oil (MAESO) resin to produce novel thermosets via free radical polymerization. The influence of MVA loading on the viscosity, gelation time, curing extent, thermomechanical properties, and tensile properties of the MAESO–MVA thermoset is investigated. The synthesized MVA exhibits very low volatility, which is beneficial for the development of construction material with low or zero emission. The viscosity of the MAESO–MVA system can be tailored to meet the commercial requirements. Increasing the MVA content accelerates the crosslinking reaction rate and improves thermal and mechanical properties of the MAESO–MVA system. The glass transition temperature increases with increasing MVA content. Soxhlet extraction experiments show that more than 90% of the components are incorporated into the crosslinking network. Overall, the developed MVA monomer shows promising properties to be used as an effective, green comonomer to replace styrene.     

Photopinking of white PVC products: A kind of magic

Short‐term photoeffects like photograying, photobluing, and photopinking are well‐known in the polyvinyl chloride (PVC) industry. While photobluing and photograying are well understood regarding their mechanisms of occurrences there are still some missing facts. Furthermore, there are three different types of pinking effects with three different mechanisms and consequently three different ways to avoid this discoloration of mainly white PVC products. The recent paper is focusing on one hand of the photopinking of PVC products, which are stabilized with nitrogen‐containing, organic stabilizer whose mechanism was not explained until today. In the past there was neither a method to analyze nor to simulate this type of photopinking. However, the discovery of a charge transfer complex between the nitrogen‐containing substance and nitric acid gave the basic idea to investigate this phenomenon by photo‐electromotive force investigations of titanium dioxide and the nitrogen‐containing substance and by cyclo voltammetry. On the other hand, the authors are attempting to supplement the findings regarding the mechanism of the photopinking of white window profiles which are lead stabilized and which were installed north‐facing in cooler areas with high humidity. Again, a simulation and the analysis of the color‐giving substance of the north‐faced photopinking were impossible in the past. The authors assumed that antioxidants might play an important rule for this type of discoloration. They supported their hypothesis by synthesis of quinoid structures based on antioxidants, spectroscopic investigations, artificial weathering, and electrochemical calculations. J. VINYL ADDIT. TECHNOL., 24:195–207, 2018. © 2016 Society of Plastics Engineers