Delaying interference enhances memory consolidation in amnesic patients.

Some patients with amnesia are able to retain new information for much longer than expected when the time that follows new learning is devoid of further stimuli. Animal work shows that the absence or delaying of interference improves long-term memory consolidation. Our study suggests that this is also true for at least some patients with amnesia. Retention of new verbal material was significantly higher in a sample of patients with amnesia (N = 12) when interference occurred at the end of a 9-min delay interval than when it occurred in the middle or at the beginning of the interval. Such findings cannot be accounted for by the mere use of explicit short-term memory rehearsal. Any such rehearsal should have been blocked by the interference, irrespective of interference onset, thus leading to poor retention in all three conditions. The current findings suggest that at least some of the severe forgetting observed in amnesia is the product of a disruption of memory consolidation by immediate postlearning interference. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Quantitative assessment of alkali silica reaction potential of quartz-rich aggregates: comparison of chemical test and accelerated mortar bar test improved by SEM-PIA

Bulletin of Engineering Geology and the Environment - The alkali silica reaction (ASR), which originates in highly alkaline conditions in concrete where reactive forms of silica are available,...     

Uptake of thallium from naturally-contaminated soils into vegetables

Thallium transfer from naturally (pedogeochemically) contaminated soils into vegetables was studied. Three different types of top-soil (heavy, medium, and light) were used for pot experiments. The soils were collected from areas with low, medium, and high levels of pedogeochemical thallium (0.3, 1.5 and 3.3 mg kg^-1). The samples of vegetables were collected and analysed. The total content of thallium in soil and the type of soil (heavy, medium and light), plant species and plant variety were found to be the main factors influencing thallium uptake by plants. The uptake of thallium from soils with naturally high pedogeochemical content of this element can be high enough to seriously endanger the food chain. These findings are very important because of the high toxicity of thallium and the absence of threshold limits for thallium in soils, agricultural products, feedstuffs and foodstuffs in most countries, including the Czech Republic.     

The expansion of renewable energies and employment effects in Germany

The promotion of electricity produced from renewable energy is a high priority of the European Union, as well of its member states. The German government wants to increase the share of renewable energies from about 5% to 12% by 2010. To attain this goal, the German government has introduced compulsory compensation schemes for electricity produced from renewable energy fed into the public grid. This paper examines the economic impact of this policy employing an econometric model. Particular emphasis was given to employment effects. In general, we distinguish two effects: (1) an expansive effect resulting from additional investments and (2) a contractive effect resulting from an increase in the production cost of power. The first effect will dominate during the first years and lead to an increase in employment of approximately 33,000 new jobs. However, the contractive effect will offset these gains and lead to a slightly negative employment balance by 2010.     

Electrical and mechanical properties of melamine‐formaldehyde–based laminates with shungite filler

Processing issues and the electrical and mechanical properties of a novel combination of a natural carbonaceous filler, Karelian shungite, and a water soluble thermosetting polymer, melamine‐formaldehyde, were investigated. Two types of shungite with different carbon contents were investigated and compared to a commercial carbon black. The larger particle size and chemically more active surface of the shungites compared to carbon black leads to easy handling with little dusting and allows water to be used as dispersant. Laminates of melamine‐formaldehyde reinforced with random cellulose fibers and filler were prepared by film stacking. The layered structure results in anisotropic resistivities for the shungites with fairly low in‐plane percolation thresholds and a dissipative resistivity above the percolation transition. In comparison, carbon black had a lower percolation threshold and a low isotropic resistivity above the percolation transition. The mechanical properties of the composites were slightly deteriorated by all three fillers, indicating poor interfacial adhesion. The results of Fourier transform infrared (FTIR) measurements are interpreted as indicating hydrogen bonding and thus relatively weak adhesion between filler and polymer. Aqueous mixtures of melamine‐formaldehyde and shungite filler had lower viscosities than corresponding melamine‐formaldehyde and carbon black filler mixtures. POLYM. COMPOS., 26:552–562, 2005. © 2005 Society of Plastics Engineers     

Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction

Rubber compounds may exhibit significant batch variations due to multiple different ingredients mixed in one compound. Hence, defining the manufacturing process for constant part quality can be challenging. Common strategies in considering batch variations in rubber processing include the determination of reaction kinetics, and the definition of process parameters according to normalized vulcanization isotherms. Thereby, maintenance of the degree of cure is targeted. With this path, information on the mechanical properties of vulcanizates is lost, despite its visibility from the kinetic data and part quality assurance is missed. This contribution points out the differences obtained for parts produced to the same degree of cure at various temperatures and intends to emphasize new strategies in process definitions. Therefore, compression molded parts were produced from styrene-butadien rubber, which was then characterized with mechanical and chemical methods. Each of the methods revealed a significant difference in part behavior, which were manufactured to the same degrees of cure but at different temperatures. It was concluded that a temperature-dependent reaction rate should be considered when quality maintenance is targeted in the production. Only then will it be possible to predict the properties adequately, with simultaneous effect of enhancing sustainability policies in rubber processing.     

Inorganic Salts of N-phenylbiguanidium(1+)—Novel Family with Promising Representatives for Nonlinear Optics

Seven inorganic salts containing N-phenylbiguanide as a prospective organic molecular carrier of nonlinear optical properties were prepared and studied within our research of novel hydrogen-bonded materials for nonlinear optics (NLO). All seven salts, namely N-phenylbiguanidium(1+) nitrate (C2/c), N-phenylbiguanidium(1+) perchlorate (P-1), N-phenylbiguanidium(1+) hydrogen carbonate (P2₁/c), bis(N-phenylbiguanidium(1+)) sulfate (C2), bis(N-phenylbiguanidium(1+)) hydrogen phosphate sesquihydrate (P-1), bis(N-phenylbiguanidium(1+)) phosphite (P2₁), and bis(N-phenylbiguanidium(1+)) phosphite dihydrate (P2₁/n), were characterised by X-ray diffraction (powder and single-crystal X-ray diffraction) and by vibrational spectroscopy (FTIR and Raman). Two salts with non-centrosymmetric crystal structures—bis(N-phenylbiguanidium(1+)) sulfate and bis(N-phenylbiguanidium(1+)) phosphite—were further studied to examine their linear and nonlinear optical properties using experimental and computational methods. As a highly SHG-efficient and phase-matchable material transparent down to 320 nm and thermally stable to 483 K, bis(N-phenylbiguanidium(1+)) sulfate is a promising novel candidate for NLO.     

High surface area SiC(O)-based ceramic by pyrolysis of poly (ethylene glycol) methacrylate-modified polycarbosilane

In the present work, a high surface area SiC(O)-based ceramic powder was synthesized upon thermal transformation of a polymer-derived macromolecular precursor, which was obtained by the chemical modification of a allylhyldrido polycarbosilane with poly(ethylene glycol) methaacrylate under argon environment. The pyrolysis of developed precursor led to the formation of amorphous and high surface area SiC(O)-based ceramic powder with in situ generated micro/meso-porosity. The specific surface area of the obtained powders depends on the processing temperature. It decreases from 363 to 122 m²/g as the pyrolysis temperature increases from 600 to 1200°C, respectively. Furthermore the promising samples were fabricated using pressing technique, which led to crack-free SiC(O) monoliths on subsquent heat treatment. The present study also emphasizes the potential of produced SiC(O) ceramic powder to support NiO catalyst. The impregnation method were used to produce high surface area NiO@SiC(O) ceramic powder (NiO as a catalyst; SiC(O) as a catalyst support) for further catalytic applications. Interestingly, the distribution of the NiO was shown to strongly depend on the oxygen content present in the SiC(O) matrix. Thus, larger oxygen contents induce homogeneously distributed flower-like NiO catalyst onto SiC(O).