Effect of superfine grinding on properties of <Emphasis Type="Italic">Vaccinium bracteatum</Emphasis> Thunb leaves powder

Vaccinium bracteatum Thunb, have been widely used in various traditional medicines and food products. The narrow and uniform particle size distribution in V. bracteatum Thunb leaves (VBTL) can be achieved through a new emerging type of foodstuff processing and superfine grinding. The VBTL powders were subjected to four particle sizes as followed: 300–125, 125–75, 75–40, and <40 μm. The VBTL powders were observed to be with smaller size and bulk density, greater surface area, tapped density and the angle of repose. Water solubility index, water holding capacity and total flavonoid extraction increased slightly with the decrease in particle size. Differential scanning calorimetry showed that the VBTL exhibiting particle size of <40 μm had the lowest peak temperature; whereas, powder with a particle size of 125–300 μm displayed the largest endothermic enthalpy. Our results of the properties of VBTL superfine powder supplied the basis for VBTL in potential industrial applications of foods.     

Potential of a lactic acid bacterial starter culture with gamma-aminobutyric acid (GABA) activity for production of fermented sausage

The ability of lactic acid bacterial starter cultures to produce gamma-aminobutyric acid (GABA) during sausage fermentation was studied. Among 305 strains of lactic acid bacteria isolated from kimchi samples, 11 strains were selected as starter candidates based on the following criteria: growth speed, pH lowering ability, and biogenic amine productivity including GABA-producing activity. During in vitro tests, the Y8 (Lactobacillus brevis), O52, and KA20 strains produced 39.00 ± 1.36, 49.73 ± 3.80, and 64.59 ± 0.61 mg/kg of GABA, respectively. Interestingly, although isolate Y8 showed low productivity in vitro, the GABA content it produced during in situ tests (61.30 ± 2.61 mg/kg) was similar to that produced by isolate PM3 (L. brevis) used as positive control (69.64 ± 2.20 mg/kg). Therefore, isolate Y8 was selected as the best functional starter culture for the production of fermented sausage because it exhibited rapid growth, safety, and abundant GABA productivity.     

Characteristics of granular cold-water-soluble potato starch treated with alcohol and alkali

The characteristics of cold-water-soluble potato starch (CWSS) produced using alcoholic–alkaline treatment were determined using scanning electron microscopy, rapid visco analysis (RVA), X-ray diffraction, differential scanning calorimetry, storage modulus (G′), loss modulus (G″), and gel images. Scanning electron microscopy revealed a damaged crystalline structure when CWSS was suspended in ethanol. The RVA analysis of native starch showed a peak value of viscosity at high temperatures, whereas the viscosity of CWSS did not show such a peak. The DSC diagram of native starch showed a gelatinization peak temperature; however, no such peak was observed for CWSS. Cold-water solubility tremendously increased in CWSS owing to the loss of crystallinity. The values of G′ and G″ in CWSS decreased with increasing temperature; the opposite was observed for normal potato starch. These results indicate that alcoholic–alkaline treatment affects the starch structure and produces totally different physicochemical properties from native starch; this makes CWSS feasible for use in a variety of food materials.     

Shear properties of metal-free wooden load-bearing walls using plywood jointed with a combination of adhesive tape and wood dowels

In this study, the potential of wood-only (metal-free) load-bearing walls was proposed and tested based on the idea of using the same type of material throughout wherever possible while improving basic properties such as strength, sound insulation, and heat insulation. Specifically, a technique was tested of combining pressure sensitive adhesive tape and wood dowels in place of nails for load-bearing structures with panel reinforcement represented by wood-frame construction. For this paper, its strength was evaluated by conducting in-plane shear tests, which revealed that the initial rigidity and maximum load of the proposed test specimens were greater than that of specimens using nails for jointing. However, the shear load factor, which is calculated based on some strength parameters and which forms the foundation of housing strength design, was slightly lower than that of the nail-jointed specimen. This was because there was a large decline in post-collapse resistance and a lower calculated absorbed energy caused by brittleness. The early detachment of panels was also revealed as a problem in the tests.     

Impact performance of two bamboo-based laminated composites

The present work aims to determine the impact performance of two bamboo-based laminated composites [bamboo/poplar laminated composite (BPLC) and bamboo/glass fiber laminated composite (BGFLC)] using low-velocity impact tests by a drop tower. In addition, fracture characteristics were evaluated using computed tomography (CT). Results showed that BPLC presented better impact properties in both directions than BGFLC. Three stages are noted in impact load–deflection curves. The load–deflection curve characteristics of two composites are different in different stages. Matrix cracking, fiber-matrix interface debonding and delamination, and fiber breakage are the three main fracture mechanisms of two composites. Structural characteristics of the components and bonding strength are the important factors for impact properties and fracture mechanism of both bamboo-based laminated composites.     

Proposal of visual strength grading rules for Uruguayan pine timber

A previous database with bending and density data of 261 structural size specimens of currently produced Uruguayan slash pine and loblolly pine timber was adjusted to meet testing and characterization requirements of European standards. Visual parameters and mechanical properties for each specimen were evaluated and their relationship was statistically analyzed. Results suggested that all specimens can be grouped in one visual grade with engineered properties similar to those of European C14 strength class. Modulus of elasticity and characteristic bending strength were the defining properties for class assignation.     

Investigating shrinkage and moisture diffusivity of melon seed in a microwave assisted thin layer fluidized bed dryer

This work aimed to investigate the drying behavior of melon seed during combined fluidized bed-microwave drying system. Three drying air temperatures (40, 55 and 70 °C), three microwave powers (270, 450 and 630 W) and three air velocities (0.8, 1.5 and 2.3 m/s) were tested. Five mathematical models were selected to fit the experimental data for drying kinetics, and the results revealed that the Aghbashloo et al. model exhibited, in all cases, the best performance in fitting the experimental data (R² varying from 0.99088 to 0.99998; χ² from 0.00000 to 0.00185 and RMSE from 0.02289 to 0.82316). Calculated values of moisture diffusivity for dried melon seed varied from a minimum of 6.51 × 10?10 to a maximum of 6.59 × 10?9 m²/s under the tested drying conditions. Moisture diffusivity values increased as air temperature and microwave power was increased. Shrinkage values were calculated and found to vary in the range from 46.99 to 15.09 %.     

Numerical simulation of transient heat transfer for tomato paste in semi rigid aluminum container

In this study, numerical model of heat transfer for tomato paste in semi-rigid aluminum container was developed by Fluent software 6.3.26. Grid independence was recognized. The impact of head space (air and water -vapor) and buoyancy force on heat transfer were investigated. Simulation results showed slowest heating zone (SHZ) located in (?11.676?<?X?<??10.738, 0.183?<?Y?<?1.269 and 4.417?<?Z?<?5.560) for model with air head space and in (?11.166?<?X?<??11.370, 0.762?<?Y?<?1.21 and 5.480?<?Z?<?5.506) for model with water–vapor head space in Cartesian system coordinate. A thermocouple was connected to container at (0, 0, 10 cartesian system coordinate) to get experimental data during process. Comparing temperatures of experimental model and predicted model (with head space) illustrated no significant difference (p?<?0.05).     

Qualitative improvement of catfish burger using <Emphasis Type="Italic">Zataria multiflora</Emphasis> Boiss. essential oil

This study investigates the effects of different concentrations of Zataria multiflora Boiss. essential oil on the quality of catfish burger during storage at 4?°C. For this purpose, fish burgers were produced with 0, 0.2 and 0.4?% ZMEO and the changes in their TBA, PV, FFA, TVB-N, microbiological loads and appeal to consumers during storage were evaluated. The obtained results indicated that the best sensory quality was attained at the highest ZMEO concentration (0.4?%) compared with control samples. The storage time significantly affected the TBA, PV, FFA, TVB-N values, as treated samples with ZMEO showed lower values of lipid oxidation products compared with the control samples. Regarding to microbial load, samples treated with 0.2 and 0.4?% of ZMEO revealed significant reduction at 9th day of storage as compared with the control samples.     

Color measurement: comparison of colorimeter vs. computer vision system

The aim of this work was to compare two food color measurement techniques, the traditional tristimulus colorimeter and an image analysis system. In this sense a computer vision system was developed, consisting of a digital camera, a controlled illumination environment, and a software package to process the images. The conversion between color spaces was performed employing empirical mathematical models; a standard color chart was used for its calibration. The color of 40 samples of raw and processed foods was measured in the CIELAB color space with the computer vision system and a colorimeter. The equivalence between both techniques, for individual L*, a* and b* values, was determined using appropriate hypothesis tests. For most samples both systems provide equivalent results, although the total color difference ?Ε was high enough to be noticeable. The average ?Ε was 5.88?±?3.32, with an average absolute ?L*?=?2.79?±?2.42, ?a*?=?3.02?±?2.94; ?b*?=?2.84?±?2.53. In addition, the color measured by the image analyses technique seemed to be more similar to the real ones.