Resonator filters using shear horizontal-type leaky surface acoustic wave consisting of heavy-metal electrode and quartz substrate

The authors have succeeded in exciting a new type of leaky surface acoustic wave (LSAW) having only a shear horizontal (SH) component that has a large electromechanical coupling factor, a large reflection coefficient, and excellent temperature stability, by combining interdigital transducers (IDTs) and reflectors made of heavy-metal films such as gold (Au), tantalum (Ta), and tungsten (W) on the ST-cut 90/spl deg/ X propagation (direction perpendicular to the X-axis) quartz substrate. This LSAW does not have a propagation decay. The square of the electromechanical coupling factor is 2.1-2.7 times larger than, the reflection coefficient is 30 times larger than, and the temperature characteristic is the same as those of a Rayleigh wave on an ST-cut X propagation quartz substrate. The authors applied this SH LSAW to resonators and resonator filters. As a result, we succeeded in developing the low loss and very small-sized resonators and resonator filters (1/5-1/4 of conventional device sizes) with IDTs with a small number of finger pairs and very small reflectors, for the first time.     

Ice clouds and Asian dust studied with lidar measurements of particle extinction-to-backscatter ratio, particle depolarization, and water-vapor mixing ratio over Tsukuba

The tropospheric particle extinction-to-backscatter ratio, the depolarization ratio, and the water-vapor mixing ratio were measured by use of a Raman lidar and a polarization lidar during the Asian dust seasons in 2001 and 2002 in Tsukuba, Japan. The apparent (not corrected for multiple-scattering effects) extinction-to-backscatter ratios (Sp) showed a dependence on the relative humidity with respect to ice (RHice) obtained from the lidar-derived water-vapor mixing ratio and radiosonde-derived temperature; they were mostly higher than 30 sr in dry air (RHice < 50%), whereas they were mostly lower than 30 sr in ice-supersaturated air (RHice > or = 100%), where the apparent extinction coefficients were larger than 0.036 km(-1). Both regions showed mean particle depolarization ratios of 20%-22%. Comparisons with theoretical calculations and the previous experiments suggest that the observed dependence of Sp on RHice is attributed to the difference in the predominant particles: nonspherical aerosols (mainly the Asian dust) in dry air and cloud particles in ice-supersaturated air.     

Effect of heating temperature on dielectric properties of Pb(Zr,Ti)O3 [PZT] fibers

Ferroelectric Pb(Zr_0.53Ti_0.47)O₃ fibers were reproducibly fabricated by sol-gel technique using triethanolamine (TEA) complexed alkoxide. The phase transition from pyrochlore to perovskite took place about 400°C and a stable single perovskite phase was obtained at 550°C. PZT gel fibers spun through nozzle were heat-treated at 700°C, and at 1000°C for 1 h to certify the effect of heat-treatment temperature on the electrical properties. The PZT fibers had elliptical cross sections with diameter of 72 m–92 m, and dense microstructure was obtained by heating at 1000°C. In the PZT fibers heat-treated at 1000°C, a distinguishable relative permittivity peak and a pyroelectric current peak were observed at their Curie temperature. The P-E hysteresis loops of the crystalline PZT fibers were also observed.     

Stress intensity factor analysis of a three-dimensional interface crack between dissimilar anisotropic materials

A new numerical method to calculate the stress intensity factors (SIFs) of a three-dimensional interface crack between dissimilar anisotropic materials was developed. In this study, the M-integral method was employed for mode separation of the SIFs. The moving least-square method was utilized to calculate the M-integral. Using the M-integral with the moving least-square method, SIFs can be automatically calculated with only the nodal displacements from the finite element method (FEM). Here, SIFs analyses of some typical three-dimensional problems are demonstrated. Excellent agreement was achieved between the numerical results obtained by the present method and the corresponding results proposed by other researchers. In addition, the SIFs of a single-edge crack, a through crack, and a semi-circular crack between two anisotropic solids in three-dimensional structures were analyzed.     

Positioning device for outdoor mobile robots using optical sensors and lasers

We propose a novel method for positioning a mobile robot in an outdoor environment using lasers and optical sensors. Position estimation via a noncontact optical method is useful because the information from the wheel odometer and the global positioning system in a mobile robot is unreliable in some situations. Contact optical sensors such as computer mouse are designed to be in contact with a surface and do not function well in strong ambient light conditions. To mitigate the challenges of an outdoor environment, we developed an optical device with a bandpass filter and a pipe to restrict solar light and to detect translation. The use of two devices enables sensing of the mobile robot’s position, including posture. Furthermore, employing a collimated laser beam allows measurements against a surface to be invariable with the distance to the surface. In this paper, we describe motion estimation, device configurations, and several tests for performance evaluation. We also present the experimental positioning results from a vehicle equipped with our optical device on an outdoor path. Finally, we discuss an improvement in postural accuracy by combining an optical device with precise gyroscopes.     

Interannual variations in vegetation activities and climate variability caused by ENSO in tropical rainforests

Interannual variations in terrestrial carbon cycle over tropical rainforests affect the global carbon cycle. Terrestrial ecosystem models show the interannual relationship between climate changes due to El Niño‐Southern Oscillation (ENSO) and net primary production over tropical rainforests. However, we need an independent analysis using satellite‐based vegetation index and climate parameters. In the present study, we extracted the ENSO‐related interannual variations from time‐series in Normalized Difference Vegetation Index (NDVI) and climate data from 1981 to 2000, and analysed their relevance. We detected relationships among NDVI, ENSO, and climate parameters from long‐term data with negative NDVI–ENSO, NDVI–temperature, and positive NDVI–precipitation relations. These correlations suggest that interannual variability in vegetation activities over tropical rainforests could be extracted from NDVI time‐series despite noise components in NDVI data, and that interannual changes in precipitation and temperature caused by ENSO play a more important role in vegetation activities over tropical rainforests than in incoming surface solar radiation.     

Ultrafast deposition of microcrystalline silicon films using high-density microwave plasma

For fast deposition of microcrystalline silicon (μc-Si:H) films, a microwave-induced high-density plasma source is developed. By using this plasma source, highly crystallized μc-Si:H films can be deposited from SiH₄+He plasma without even using H₂ dilution and substrate heating. A systematic deposition study shows that the film deposition rate increases with increase in the input microwave power and the SiH₄ flow rate. The film crystallinity also improves with power but degrades with increase in the SiH₄ flux. After optimizing the plasma conditions, the deposition of a highly crystallized μc-Si film has been realized at an ultrafast deposition rate higher than 700 nm/s.