Finite heterogeneous element method using sliced microstructures for linear elastic analysis

A new finite heterogeneous element consisting of sliced microstructures (FHES) is applied in a multi?scale technique. The FHES represents a heterogeneous material with microscopic constituents without homogenization or microscopic finite element analysis. A representative volume element extracted from a heterogeneous structure is thinly sliced. Each slice is modeled as a combined spring to calculate properties of the FHES. Each FHES has the same number of nodes as an ordinary finite element, and the macroscopic analysis cost is the same as that for ordinary finite element analysis. However, the FHES retains information about the microscopic material layout (i.e., the distribution of a material's property) in itself that is lost during homogenization. In the proposed approach, materials are not homogenized. The FHES does not have a constant (homogenized) material property and can ‘change stiffness’ depending on its deformation behavior. This reduces error due to coarse?graining and allows us to calculate the macroscopic deformation behavior with sufficient accuracy even if a large gradient of strain is generated in the macroscopic field. The novelty of the research is the development of rational heterogeneous finite elements. The paper presents the theory behind the FHES and its practical application to a linear elastic problem. Copyright © 2014 John Wiley & Sons, Ltd.     

Observation of the intrinsic pinning of a magnetic domain wall in a ferromagnetic nanowire

The spin transfer torque is essential for electrical magnetization switching. When a magnetic domain wall is driven by an electric current through an adiabatic spin torque, the theory predicts a threshold current even for a perfect wire without any extrinsic pinning. The experimental confirmation of this 'intrinsic pinning', however, has long been missing. Here, we give evidence that this intrinsic pinning determines the threshold, and thus that the adiabatic spin torque dominates the domain wall motion in a perpendicularly magnetized Co/Ni nanowire. The intrinsic nature manifests itself both in the field-independent threshold current and in the presence of its minimum on tuning the wire width. The demonstrated domain wall motion purely due to the adiabatic spin torque will serve to achieve robust operation and low energy consumption in spintronic devices.     

Relationship between transition of fracture mode of carbon fiber-reinforced plastic and glass transition temperature of its resin

In this study, the correlation between the stress–strain behavior of a carbon fiber-reinforced plastic (CFRP) and the temperature at which the heat-affected zone (HAZ) is generated is investigated. First, CFRP ([?45/45]_2s laminate) specimens were heated at several temperatures to induce thermal damage, i.e. a HAZ. Subsequently, tensile tests were conducted on the specimens with thermal damage. Then, microscopy and X-ray measurements were carried out to discuss the stress–strain responses from a microscopic viewpoint. The results of strain measurement during thermal treatment indicated that the strain increases with increasing temperature. The tensile tests showed that the CFRP specimens subjected to thermal damage during heating at a high temperature fractured in the ductile mode, whereas the fracture mode of the CFRP specimens with low-temperature thermal damage was discontinuous. Microstructure observation using X-ray tomography showed that the debonding between the carbon fibers and the resin matrix induced by heating to above the glass transition temperature was responsible for the continuous fracture mode.     

X-ray Diffraction Study of MgB2 at Low Temperatures

We have performed powder X-ray diffraction of MgB₂ superconductor between 10 and 300 K. Temperature dependence of integrated intensities of both (002) and (110) X-ray reflections shows a peak at around T_C, superconducting transition temperature. The integrated intensity of the X-ray reflection is related to the phonon frequency through a Debye--Waller factor. Lattice parameters a and c show negative thermal expansions at low temperatures. The negative thermal expansion might be due to an electronic origin and not directly related to the superconducting transition.     

Synthesis and Some Properties of Panulose. A New Keto-Oligosaccharide

During the studies on the transformation of oligosaccharides in alkaline solution, we obtained a new keto-trisaccharide. This oligosaccharide was obtained by the Lobry de Bruyne-Alberda van Ekenstein transformation of panose. The new saccharide was separated from panose by paper chromatography and cellulose column chromatography using the solvent system containing boric acid. The trisaccharide contains one mole of fructose moiety in its structure. The results of the partial hydrolysis by acids and enzymes suggested the structure of 6²-α-glucosyl maltulose 0-α-D -glucopyranosyl-(1→6)-0-α-D -Glucopyranosyl-(1→4)-D -Fructosel. The novel saccharide was named panulose, as this was obtained by the isomerization of panose.     

Development and Use of a Kinetical and Real-Time Monitoring System to Analyze the Replication of Hepatitis C Virus

In microbiological research, it is important to understand the time course of each step in a pathogen’s lifecycle and changes in the host cell environment induced by infection. This study is the first to develop a real-time monitoring system that kinetically detects luminescence reporter activity over time without sampling cells or culture supernatants for analyzing the virus replication. Subgenomic replicon experiments with hepatitis C virus (HCV) showed that transient translation and genome replication can be detected separately, with the first peak of translation observed at 3–4 h and replication beginning around 20 h after viral RNA introduction into cells. From the bioluminescence data set measured every 30 min (48 measurements per day), the initial rates of translation and replication were calculated, and their capacity levels were expressed as the sums of the measured signals in each process, which correspond to the areas on the kinetics graphs. The comparison of various HuH-7-derived cell lines showed that the bioluminescence profile differs among cell lines, suggesting that both translation and replication capacities potentially influence differences in HCV susceptibility. The effects of RNA mutations within the 5′ UTR of the replicon on viral translation and replication were further analyzed in the system developed, confirming that mutations to the miR-122 binding sites primarily reduce replication activity rather than translation. The newly developed real-time monitoring system should be applied to the studies of various viruses and contribute to the analysis of transitions and progression of each process of their life cycle.     

Deep Phenotyping of Superficial Epidermolytic Ichthyosis due to a Recurrent Mutation in KRT2

Superficial epidermolytic ichthyosis (SEI) is an autosomal dominant inherited ichthyosis. SEI is caused by mutations in KRT2 and frequently shows erythroderma and widespread blistering at birth. We report the clinical manifestations of two patients from a Japanese family with SEI caused by a hotspot mutation, p.Glu487Lys, in KRT2. In addition, we summarize previous reports on SEI patients with the identical mutation. One of the two patients had disease onset at the age of 7 months. The other patient’s age of onset is unknown, but it was in childhood. Neither of the two patients showed erythroderma. To perform deep phenotyping, we studied the age of onset and the frequency of erythroderma in 34 reported SEI cases with the p.Glu487Lys mutation, including the present cases. Among the cases with sufficient clinical information, 44.4% of the cases that were due to p.Glu487Lys in KRT2 occurred at birth. Erythroderma was observed in 11.1% of the cases with p.Glu487Lys in KRT2.     

Self-assembly of three dimensional micro mechanisms using thermal shrinkage of polyimide

This paper describes three-dimensional microstructures fabricated using a simple self-assembly process involving the thermal shrinkage of polyimide. The proposed method enables hinged structures to be automatically rotated out of the wafer plane and to remain bent without the need to use any interlocking mechanisms. The hinged structures were fabricated using surface micromachining techniques involving heating in a furnace. An increase in the bending angle due to the shrinkage of polyimide was observed with increasing heating temperature, heating time, and length of the polyimide hinge. Of these three parameters, the heating time was found to be the most suitable for precise control of the bending angle. Furthermore, microcubes were fabricated by this method and the self-assembly process was successfully visualized using a CCD camera.     

Current steel forgings and their properties for steam generator of nuclear power plant

Current steel forgings used for the construction of steam generators (SGs) for a nuclear power plant (NPP) were introduced from the following three (3) features. (1) Integral type steel forgings such as (i) primary head integrated with nozzles, manways and supports, (ii) steam drum head integrated with nozzle and handhole, (iii) conical shell integrated with cylindrical sections and handholes, have been developed to enhance the structural integrity of the component and to make fabrication and inspection including in-service inspection easier. (2) The high strength steel such as SA508 Cl.3a has been adopted to decrease the weight of components, resulting in enhancement of aseismatic properties of SG. (3) Low Si SA508 Cl.3 steel with the addition of Al was investigated and was applied to a heavy thick tube sheet forging, to minimize the macro- and micro-segregations in the ingot.     

乙酸丁酯反应精馏过程模拟设计

反应精馏偶合了反应和精馏两种单元操作,通过精馏促进反应,可以提高反应转化率和收率,为可逆反应的化工过程生产提供了新的设计途径。基于严格热力学分析计算,利用计算机模拟和优化手段。提出了乙酸丁酯反应精馏、分离纯化的生产流程。采用UNIQUAC方程表征乙酸-正丁醇-乙酸丁酯-水四元非理想体系的汽液平衡,首先,根据实验数据回归了热力学模型中的交互作用参数,并预测了体系中5个共沸物组成,模型的计算结果与实际数据吻合。基于平衡级模型,提出了由平衡反应器、反应精馏塔、倾析器和纯化塔构成的可行流程,对提出的设计流程进行了模拟、优化,得到了操作工艺参数。模拟结果对工业过程的设计和改造具有一定的指导意义。