Effects of JPEG2000 data compression on an automated system for detecting clustered microcalcifications in digital mammograms.

The functionalities of the JPEG2000 standard have led to its incorporation into digital imaging and communications in medicine (DICOM), which makes this compression method available for medical systems. In this study, we evaluated the compression of mammographic images with JPEG2000 (16 : 1, 20 : 1, 40 : 1, 60.4 : 1, 80: 1, and 106 : 1) for applications with a computer-aided detection (CAD) system for clusters of microcalcifications. Jackknife free-response receiver operating characteristic (JAFROC) analysis indicated that differences in the detection of clusters of microcalcifications were not statistically significant for uncompressed versus 16: 1 (T = -0.7780; p = 0.4370), 20 : 1 (T = 1.0361; p = 0.3007), and 40 : 1 (T = 1.6966; p = 0.0904); and statistically significant for uncompressed versus 60.4 : 1 (T = 5.8883; p < 0.008), 80 : 1 (T = 7.8414; p < 0.008), and 106 : 1 (T = 17.5034; p = < 0.008). Although there is a small difference in peak signal-to-noise ratio (PSNR) between compression ratios, the true-positive (TP) and false-positive (FP) rates, and the free-response receiver operating characteristic (FROC), figure of merit values considerably decreased from a 60 : 1 compression ratio. The performance of the CAD system is significantly reduced when using images compressed at ratios greater than 40 : 1 with JPEG2000 compared to uncompressed images. Mammographic images compressed up to 20 : 1 provide a percentage of correct detections by our CAD system similar to uncompressed images, regardless of the characteristics of the cluster. Further investigation is required to determine how JPEG2000 affects the detectability of clusters of microcalcifications as a function of their characteristics.     

A practical approach to electrode-skin impedance unbalance measurement

Unbalance between electrode-skin impedances is a major problem in biopotential recordings, leading to increased power-line interference. This paper proposes a simple, direct method to measure that unbalance at power-line frequency (50-60 Hz), thus allowing the determination of actual recording conditions for biopotential amplifiers. The method is useful in research, amplifier testing, electrode design and teaching purposes. It has been experimentally validated by using both phantom impedances and real electrode-skin impedances.     

A general architecture in support of interactive, multimedia, location-based mobile applications

The widespread use of cellular telephones and the availability of user-location information are facilitating the development of new personalized, location-based applications. However, as of today, most of these applications are unidirectional and text-based where the user subscribes and the system sends a text message when appropriate. This article describes a modular and general architecture that supports the development of interactive, multimedia, location-based applications, providing an extra level of service to the users. The flexibility of the architecture is demonstrated by presenting the wireless safety security system (Wi-Via) and other potential applications     

W-CDMA Uplink Capacity and Interference Statistics of a Long Tunnel Cigar-shaped Microcells Using the Hybrid Model of Propagation with Imperfect Power Control

The uplink capacity and the interference statistics (mean and variance) of the sectors of the cigar-shaped W-CDMA microcell are studied. A model with eighteen sectors is used to analyze the uplink. The microcells are assumed to exist in a long tunnel with at least nine base stations. The hybrid model of propagation is used in the calculations. The capacity and the interference statistics of the sectors are studied in terms of the most important parameters: sector radius, specific attenuation factor, antenna sidelobe levels, bend losses and the power control standard deviation error.     

Study and emulation of IPv6 Internet-exchange-based addressing models

This article presents the first results of our study and experimentation with the new IPv6 IX-based address assignment model and its deployment in IXs where peering is organized around route servers. An IX model that identifies where the new IX customers can be located and how services like provider choice or multihoming can be offered is proposed. The article also describes the emulation environment that has been developed to easily create and experiment with complex IX scenarios without involving setup of costly configurations made of several pieces of equipment. This work has been carried out in the context of the European Union funded project Euro6IX.     

Solar irradiation and PV module temperature dispersion at a large‐scale PV plant

When evaluating the performance of a photovoltaic (PV) system, it is extremely important to correctly measure the plant operating conditions: incident irradiation and cell temperature. At large‐size PV plants, the possible dispersion of the plant operating conditions may affect the representativeness of the values measured at one single point. The available literature contains many observations on irradiance dispersion (typically associated to high temporal resolution experiments) and its effects on the PV power output (unexpected power transients, power fluctuations, etc.). However no studies have been made on the long‐term energy‐related effects of geographic dispersion of solar irradiation, which could affect, for example, to the uncertainty in determining energy performance indexes like PR. This paper analyses the geographical dispersion in the PV operating conditions observed at low temporal resolutions (day, month and year) at two PV plants located, respectively, in the south of Portugal and the north of Spain. It shows that daily irradiation deviations are significantly higher than is commonly supposed. Furthermore, once the measurement points are a certain distance apart (a few hundred metres), the deviations in irradiation appear to be independent of distance. This could help to determine how many irradiance sensors to install in order to reduce uncertainty. Daily mean temperature differences between different points at a large‐scale PV plant range from 1 to 7 K and are not related to the distance between measurement points. Copyright © 2014 John Wiley & Sons, Ltd.     

An 8-Bit Digitally Controlled Programmable Phase Shifter Circuit for Sinusoidal Signals with 252∘ Phase Control Range

In this paper, the synthesis, design, and implementation of a programmable phase shifter circuit for sinusoidal signals is presented. The proposed circuit, built-up herein with operational amplifiers (OPAMPs), high precision resistors and low voltage switches, consists of a digitally controlled amplitude attenuator in combination with a single-tone orthogonalizer. Experimental results agree with theoretical background: the attained phase range was 252^° in 256 steps with a median step of 0.9^°. The inaccuracy of the circuit was determined to be of 0.03 %. Contrary to other OPAMP approaches for sinusoidal signals reported in the literature and based on a first-order all-pass filter structure, the approximation suggested in this work is based on a different concept. The achieved results demonstrate the functionality of the system for the case of a sinusoidal signal with frequency of 1 kHz. Notwithstanding, the proposed architecture can be extended to operate at higher frequencies by using different building blocks with larger bandwidth. Furthermore, it can be extended as well to work out with other periodic input waveforms, like triangular shapes or square waves, with the use of an appropriate orthogonalizer.     

Spin-Crossover Grafted Monolayer of a Co(II) Terpyridine Derivative Functionalized with Carboxylic Acid Groups

The synthesis and characterization of a new Co(II) spin-crossover (SCO) complex based on 4′-(4-carboxyphenyl)−2,2′:6′,2″-terpyridine ligand are reported. This complex can be successfully grafted on silver surface maintaining the SCO behavior. Thus, atomic force microscopy (AFM), matrix assisted laser desorption ionization – time-of-flight mass spectrometry (MALDI-TOF MS), Raman spectroscopy, and XPS measurements, upon surface deposition, evidence the formation of a monolayer of intact molecules grafted through carboxylate groups to the Ag surface. Three different techniques: Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS), supported by first-principles calculations, confirm that the deposited molecules undergo a gradual spin transition with temperature. This phenomenon is unprecedented for a monolayer of molecules directly grafted onto a metallic surface from solution.